Nima Khalilpoor

Nima Khalilpoor

Auto-generated profile, based on publicly available information

Nima Khalilpoor

Department of Energy Engineering, Graduate School of the Environment and Energy, Science and Research Branch Islamic Azad University Tehran Iran

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2022 in Energy Science & Engineering
Verified
Journal Article
Open access
JSJatin Sharma
Jatin Sharma
SSSameer Soni
Sameer Soni
PPPriyanka Paliwal
Priyanka Paliwal
SSShaik Saboor
Shaik Saboor
PCPREM KUMAR CHAURASIYA
PREM KUMAR CHAURASIYA
Asif AfzalAsif Afzal
Asif Afzal
Solar photovoltaic (PV) power is emerging as one of the most viable renewable energy sources. The recent enhancements in the integration of renewable energy sources into the power grid create a dire need for reliable solar power forecasting techniques. In this paper, a new long‐term solar PV power forecasting approach using long short‐term memory (LSTM) model with Nadam optimizer is presented. The LSTM model performs better with the time‐series data as it persists information of more time steps. The experimental models are realized on a 250.25 kW installed capacity solar PV power system located at MANIT Bhopal, Madhya Pradesh, India. The proposed model is compared with two time‐series models and eight neural network models using LSTM with different optimizers. The obtained results using LSTM with Nadam optimizer present a significant improvement in the forecasting accuracy of 30.56% over autoregressive integrated moving average, 47.48% over seasonal autoregressive integrated moving average, and 1.35%, 1.43%, 3.51%, 4.88%, 11.84%, 50.69%, and 58.29% over models using RMSprop, Adam, Adamax, SGD, Adagrad, Adadelta, and Ftrl optimizer, respectively. The experimental results prove that the proposed methodology is more conclusive for solar PV power forecasting and can be employed for enhanced system planning and management.

17 January 2022 in Energy Science & Engineering
Verified
Journal Article
Open access
PDF file
SKSanjeevakumar Veerasangappa Khandal
Sanjeevakumar Veerasangappa Khandal
Ümit AğbulutÜmit Ağbulut
Ümit Ağbulut
Asif AfzalAsif Afzal
Asif Afzal
Mohsen SharifpurMohsen Sharifpur
Mohsen Sharifpur
KRKaladgi Abdul Razak
Kaladgi Abdul Razak
NKNima Khalilpoor
Nima Khalilpoor
Compression ignition (CI) engines have good performance but more exhaust emissions. Dual fuel (DF) engines have better performance and lower emissions compared to CI mode. Also, the scarcity of fossil fuels made the researchers to find alternative fuels to power CI engines. Therefore, the present work aims to use hydrogen (H2) and honne oil biodiesel (BHO) to investigate the performance of CI engines in DF mode. Also, it aims to compare the performance of CI engines in various DF modes, namely induction, manifold injection, and port injection. First, the CI engine was fuelled completely by diesel fuel and BHO. The data were gathered when the engine ran at a constant engine speed of 1500 rpm and at 80% load. Second, the CI engine was operated in various DF modes and data were generated. CI engine operation in DF mode was smooth with biodiesel and H2. The brake thermal efficiency (BTE) of 32% and 31.1% was reported with diesel and biodiesel, respectively, for manifold injection due to low energy content and high viscosity of biodiesel. These values were higher than CI mode and other DF modes. Fuel substitution percentage for DF manifold injection was 60% and 57% with diesel and biodiesel, respectively. Smoke, hydrocarbon (HC), and carbon monoxide (CO) emissions were lower than conventional mode, but a reverse trend was observed for oxides of nitrogen (NOx) emissions. Heat release rate (HRR) and peak pressure (PP) were higher than conventional mode due to the fast combustion rate of hydrogen. The shortest ignition delay (ID) period was noticed for traditional diesel fuel, but it was longer for BHO biodiesel due to its higher viscosity and lower cetane number. On the contrary, the presence of hydrogen led to an increment in the combustion duration (CD) owing to the scarcity of oxygen in CD. Consequently, the paper clearly showed that the injection way of hydrogen plays a respectable role in the engine characteristics.

18 February 2021 in International Journal of Low-Carbon Technologies
Verified
Journal Article
Open access
PDF file
KSKamal Kant Sharma
Kamal Kant Sharma
AGAkhil Gupta
Akhil Gupta
RKRaman Kumar
Raman Kumar
JCJasgurpreet Singh Chohan
Jasgurpreet Singh Chohan
SSShubham Sharma
Shubham Sharma
SDShashi Prakash Dwivedi
Shashi Prakash Dwivedi
This paper unveils a sustainable energy plan for optimal utilization of available electrical energy resources for an energy-deficient village. The chosen village is Nangal, near Barnala, Punjab, India. Primarily, the requirements of electric energy are recorded and elaborated for around 450 households. Aiming this, the potential to harness electric power and its effective utilization has been identified from the available resources of energy: biomass, agriculture waste and solar photovoltaic (PV) technology. In order to achieve this, a hybrid renewable energy system (HRES) model is proposed whose performance is evaluated by implementing it in hybrid optimization model for electric renewable (HOMER) software. HOMER software provides optimal solution for a commercial biogas plant for catering cooking gas demand. Also, a coordinated solution for solar PV-operated water pumps used for irrigation, village water supply and solar PV street lights is presented and analyzed. In this way, the accurateness of proposed model is investigated by estimating the optimal electric power demand and its economic benefits. It has been revealed that the computed cost of energy and total net present cost are $0.032/KWh and $76,837, respectively, by the parametric assessment of proposed HRES system. It is envisaged that the proposed model can be a road map for future research engineers in designing an effective energy utilization for villages.

15 July 2021 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
NSNeeru Singla
Neeru Singla
SSSandeep Singla
Sandeep Singla
PTParteek Singh Thind
Parteek Singh Thind
JCJasgurpreet Singh Chohan
Jasgurpreet Singh Chohan
Raman KumarRaman Kumar
Raman Kumar
NKNima Khalilpoor
Nima Khalilpoor
Anthropogenic emissions, such as industrial, vehicular, biomass burning, and coal combustion, play a significant role in degrading the atmospheric conditions of India. Therefore, in the present study, applicability of the photocatalytic-concrete blocks was estimated in improving the ambient environment of Chandigarh, India. The photocatalytic-concrete blocks were prepared by mixing the TiO2 particles with cement. All the experiments, designed in accordance with the BoxBehnken approach, in combination with response surface methodology, were performed in a batch reactor. Further, the process parameters, namely, concentration of TiO2 (1 to 5g), UV-A irradiance (1 to 5mW/cm2), and relative humidity (RH) (10 to 70), were optimized to achieve maximum degradation of NO2. Outcomes of batch experiments depicted that the maximum degradation of NO2, that is, 68.32, was attained at 3.35g of TiO2, 5mW/cm2 of UV-A irradiance, and 64.60 RH. The findings of batch experiment were further theoretically applied to degrade the ambient NO2 concentration of Chandigarh, India. It was estimated that using the photocatalytic concrete for construction of Chandigarhs pavements may reduce the ambient NO2 concentration of Chandigarh, India, to an average of 5.80μg/m3. Afterwards, reusability of photocatalytic-concrete blocks was also assessed, and it was made evident that after five cycles, their efficiency was reduced by only 7.15. Subsequently, it was revealed that hydrogen peroxide-based treatment of photocatalytic-concrete blocks could completely regenerate its treatment efficiency. Therefore, it is expected that the findings of this study may prove beneficial in urban planning, as it may assist scientific auditory in identifying the applicability of TiO2-based photocatalysis in mitigating the impacts of vehicular emissions.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
TSTarun Sharma
Tarun Sharma
Sandeep SinghSandeep Singh
Sandeep Singh
PTParteek Singh Thind
Parteek Singh Thind
JCJasgurpreet Singh Chohan
Jasgurpreet Singh Chohan
Raman KumarRaman Kumar
Raman Kumar
AIAlibek Issakhov
Alibek Issakhov
Unfired admixed soil blocks are composed of standard soil and a stabilizer or reinforcement material in the form of binder and fiber. This literature review systematically examines the performance characteristics of unfired admixed soil blocks made by using binders such as cement, lime, and other agricultural and industrial wastes available in the form of fibers and ash. A systematic search was carried out on Web of Science and SCOPUS using different keywords, and 313 records were found. After the screening and eligibility process as per PRISMA guidelines, 36 papers were eligible and hence selected to be reviewed and analyzed. This paper examines the performance characteristics of the blocks in terms of physical properties, mechanical properties, durability, microstructural evaluation, statistical analysis, cost analysis, energy consumption, and carbon dioxide emission. It was found that of the total 9 parameters considered for discussion, most of the studies using different admixtures (binder and fibers) in soil blocks were focused on compressive strength testing of blocks, water absorption, and durability by wetting drying cycles. However, other parameters like bulk density, maximum dry density and optimum water content, thermal conductivity, tensile strength, and flexural strength examined in recent studies are also reported in this paper. This systematic review proposes some research problems to be worked on various additional parameters like linear shrinkage, pull out test, erosion test, sorptivity test, porosity, efflorescence, water permeability, freeze/thaw test, and analysis of energy consumption and carbon dioxide emissions during the manufacturing of unfired admixed soil blocks using various binders and fibers for further study which the current literature lacks.

13 August 2021 in International Journal of Photoenergy
Verified
Journal Article
Open access
PDF file
Reza AlayiReza Alayi
Reza Alayi
NKNima Khalilpoor
Nima Khalilpoor
SHSaeid Heshmati
Saeid Heshmati
ANAtabak Najafi
Atabak Najafi
AIAlibek Issakhov
Alibek Issakhov
Due to the reduction of fossil resources, the replacement of renewable energy sources such as solar energy has become mandatory. Solar energy does not contain pollution and widely available in all parts of the world, especially in warm regions. Our country (IRAN) is geographically located in a hot and dry region, and with more than 280 sunny days per year, one of the nonpower applications of solar energy is heating space and water consumption of the building using solar thermal energy. Solar water heaters can be used to heat the water used in buildings, which is the main purpose of this study. Water heating consumes an average of 20% to 30% of the total energy consumption in the residential building. Therefore, using solar water heaters annually can provide 70% of the energy needed for water heating. The system designed in this research is able to provide 75% of the hot water consumption needs. If an auxiliary heat source is used next to this system, all hot water needs of the building can be met throughout the year. In this case, as much as 237.3 kWh, energy will be saved from fossil energy sources.