18 March 2020 in Materials Research Express
NPNur Rofiqoh Eviana Putri
+2
A modified functional group of chitosan film was successfully prepared. Maleic anhydride (MA) was used to introduce carboxylic functional groups into chitosan film to enhance the drug loading capacity of the film and also control the drug release. The experiment was carried out by adding various amounts of MA into a chitosan solution, followed by loading the drug into the mixed solution. The drug release study was conducted by immersing the chitosan film in phosphate-buffered saline (PBS) solution (pH 7.4) as a body fluid model. This study was carried out in purpose to study the release kinetics of a drug from the modified chitosan film. Hence, the drug release data obtained were correlated with three mathematical models of drug release kinetics: Higuchi’s model, Peppas’ Model, and First-order model. Finally, the results revealed that the modified chitosan film exhibited a controlled release profile. Among the three mathematical models, the drug release profile from the modified chitosan film was best fitted with the First-order model.
1 January 2020 in IOP Conference Series: Materials Science and Engineering
Chitosan (Ch), a natural polysaccharide derived from chitin is a widely used raw material in biomaterial research. Modification of chitosan using maleic anhydride (MA) have been done by several researchers with dimethyl sulfoxide (DMSO) and acetic acid as a common solvent. In the present work the chitosan was grafted with maleic anhydride using acetic acid and water as a solvent toward ecofriendly functionalization process. In addition, proposed mechanism of this grafting was further studied. The total acidic content and conversion of grafted films were calculated with varying concentration of MA:Ch ratio and temperature. The success of chitosan grafting with maleic was verified by Fourier Transform Infrared Spectroscopy (FTIR) analysis. FTIR analysis showed the appearance of new ester group and shifting of amide group from FTIR spectra which indicates that the esterification and amidation occurred in this grafting process.
6 August 2025 in Journal of Cleaner Production
CSChandra Edward Suryanaga
+5
1 January 2020 in IOP Conference Series: Materials Science and Engineering
NPNur Rofiqoh Eviana Putri
Amongst various methods for chitosan modification, grafting process is one of the promising techniques to alter chitosan surface properties. Maleic anhydride (MA) was grafted onto chitosan in the presence of an initiator to produce chitosan-graft-maleic anhydride (CTS- graft-MA). In this study, we compared and optimized two types of initiators: Ceric Ammonium Nitrate (CAN) and Ferrous Ammonium Sulfate (FAS) with various ratios in the synthesis of chitosan-graft-maleic anhydride. Chitosan was dissolved in dilute acetic acid solution. Subsequently, the initiator was added into solution to initiate the reaction and maleic anhydride was added immediately afterward. The reaction was carried out for 45 minutes at 70 °C with 430 rpm of agitation. The results of Fourier Transformed Infrared (FTIR) spectroscopy showed an appearance of a new peak at 1705.07 cm−1 which belongs to C=O bands for both initiators. To find out the optimum results from CAN and FAS, the back-titration method was performed. The optimum ratio for CAN is 2.51% with the acidic content 5.4421 mmol/gr, while FAS is 0.268% with the acidic content 4.4673 mmol/gr. In conclusion, CAN is more effective than FAS to initiate the grafting process on CTS-graft- MA.
1 August 2019 in IOP Conference Series: Materials Science and Engineering
The modification of local Indonesian chitosan as a drug carrier is conducted by grafting with maleic anhydride (MA). The grafted film resulting in a negative charge of carboxyl group attach on chitosan backbone. Several ratio of MA/chitosan is conducted to evaluate the effect of MA on the drug release behavior. Chitosan and MA was dissolved and stirred in 1% (v/v) acetic acid for 24 hours. Tween 80 and curcumin are added to the solution as surfactant and drug model respectively. The homogeneous solution is casted into polyethylene petri dish and dried under room temperature. Chitosan-graft-MA is characterized by Fourier Transform Infra-Red (FTIR) in addition to gravimetric titration to characterize the existing of carboxyl groups of the films. The swelling and degradation ability in phosphate buffered saline (PBS) solution is showed an increasing trend as the addition of MA. The kinetic study of drug release is performed in Peppas and first order model. An optimum condition of grafting is achieved at 150% (w/w).
1 January 2020 in IOP Conference Series: Materials Science and Engineering
The amount of plastic waste has always increased over the years and caused many problems in the environment because of its poor degradation rate characteristics. Recently, the interest in biodegradable polymer to substitute these synthetic plastic materials has been increased. Biocomposite materials have better biodegradability rate and can be utilized for several applications, such as packaging, agriculture, biomedical and healthcare. Chitosan as natural polymer that has good biodegradability can be combined with low density polyethylene (LDPE) to improve its mechanical properties. The LDPE-chitosan biocomposites were made by mixing chitosan and LDPE with maleic anhydride as compatibilizer and perbutyl Z as an initiator. In this study, the decomposition kinetic and thermal behavior of low density polyethylene (LDPE)-chitosan biocomposites were investigated by thermogravimetric analysis (TGA). The residual weight of biocomposites after decomposition process was analyzed. The samples were heated in the range of temperature from 25 °C to 500 °C and at different heating rates of 5, 10, 15, 20 °C/min, respectively. The result shows that activation energy decreased along with the increasing of chitosan concentration. This result indicates that the LDPE-chitosan biocomposite is a promising candidate for substitution of synthetic plastic.