1 December 2003 in IEEE Transactions on Antennas and Propagation
The design and development of a dual linearly polarized aperture coupled circular microstrip patch antenna at C-band are presented. The antenna uses a novel configuration of symmetric and asymmetric coupling slots. Variations in isolation between orthogonal feedlines and antenna axial ratio with the position of coupling slots are studied and broadband isolation and axial ratio are achieved. The prototype antenna yields 7.6 dBi peak gain, 70/spl deg/ 3-dB beam width, 25 dB cross-polarization levels and an isolation better than 28 dB between the two ports. With an external quadrature hybrid coupler connected to the two orthogonal feedlines, the antenna yields 3-dB axial ratio bandwidth of more than 30% at 5.8 GHz.
22 December 2009 in IEEE Antennas and Wireless Propagation Letters
This letter describes an efficient three-dimensional (3D) image reconstruction algorithm for microwave tomography. Using the thin-wire approximation with resistive voltage sources (RVS), a realistic FDTD model is created for the transmitting and receiving antennas. To verify the algorithm, image reconstruction is made from experimental data using a cylindrical test object made of sunflower oil. In the results, successful image reconstruction has been shown, indicating that the FDTD model is applicable. For comparison, a reconstruction with a two-dimensional (2D) version of the algorithm was made. A significant increase in accuracy of the reconstructed object was seen for the 3D version.
2 October 2003 in Microwave and Optical Technology Letters
21 November 2008 in IEEE Antennas and Wireless Propagation Letters
This letter presents a detailed study of a microwave tomography system using 3-D finite-difference time-domain methods (FDTDs). The algorithm, which uses a subcell model in form of the thin-wire approximation to model wire antennas, has been validated numerically using published numerical electromagnetic code (NEC) data for dipole antennas, and experimentally by comparing with measurements obtained for a monopole antenna array. The agreement between calculated and measured performances of the monopoles is close. In order to understand the fabrication tolerance, a parametric study was performed with regards to position of ground plane and grid size. It is found that the ground plane plays an important role in the performance of the monopole antennas. The excellent agreement is very promising for future deployment of the algorithm in 3-D microwave tomography applications.
1 September 2006 in International Journal of RF and Microwave Computer-Aided Engineering
This article presents various novel and conventional planar electromagnetic bandgap (EBG)‐assisted transmission lines. Both microstrip lines and coplanar waveguides (CPWs) are designed with circular, rectangular, annular, plus‐sign and fractal‐patterned EBGs and dumbbell‐shaped defected ground structure (DGS). The dispersion characteristics and the slow‐wave factors of the design are investigated. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.