1 February 2023 in SPE Journal
Summary: For conventional particles used for conformance control in fractured-vuggy reservoirs, large-size particles easily plug the wellbore area but have difficulty plugging the zone far from the wellbore, while small-size particles easily move in depth. In this study, fiber balls for bridging in fractured-vuggy reservoirs were developed by wrapping the fiber in the precrosslinked gel. Due to the influence of temperature and salinity in the formation, the gel degraded and the filamentous fibers were released. Then, the released fibers bridged in the fractures while reducing the safety risk of the injection process. As a water plugging agent, the fiber balls can decrease the conductivity in high-permeability fractures and increase the conductivity in low-permeability fractures, thus improving waterflooding efficiency and enhancing oil recovery. The plugging performance of fiber balls was evaluated by coreflooding experiments. The experimental results show that the optimal formulation of fiber balls is 7% acrylamide (AM) + 3% polyamino acid ester + 0.75% potassium persulfate (K2S2O8) + 4% polypropylene fiber + 4% glass fiber + 0.15% polyethylene glycol diacrylate (PDA) + 0.08% N,N-dimethyl acrylamide (MBA) + 0.1% polyacrylamide (PAM). The release time of fibers from the external gel is 42 to 57 hours, meeting the requirements of conformance control. According to the results of the performance evaluation, the larger the fracture width, the worse the bridging effect of fibers. Besides, the rule of “3/2 bridging” fiber was proposed: When the fiber length is 3/2 times the fracture width, the fiber has the strongest bridging and plugging ability. With the increase in fracture width, the fiber concentration needs to be increased to have a good bridging performance. The results of this study can provide a new idea for the technology of conformance control in fractured-vuggy reservoirs.
8 May 2026 in SPE Journal
Summary: Carbon dioxide (CO2) mineralization sequestration is one of the stable methods used to safely store CO2 in underground rock formations. However, the formation of a dense carbonate product layer during the mineralization process will seriously hinder the mass transfer efficiency at the reaction interface, resulting in mineralization kinetic hysteresis, and decreased sequestration efficiency. For this study, we prepared CO2 nanobubbles using the hydrodynamic cavitation method and conducted mineralization and hydrogen production experiments of basalt in a system containing nanobubbles and carbonated water, revealing the mechanism of action of CO2 nanobubbles. The results reveal that the CO2 content in the nanobubble water reaches 1.65 ± 0.006 mg/L, approximately 1.2-fold that of the carbonated water system, which provides a richer carbon source for the mineralization reaction. The CO2 nanobubbles prepared with 0.1 wt% nonylphenol ethoxylate (NPE) as solvent have an average diameter of 187.5 nm, a zeta potential of −40.54 mV, and a concentration of 6.3×108 nanobubbles/mL. Compared with the carbonated water system, the CO2 nanobubble system promotes basalt dissolution and enhances the release of calcium ion (Ca2+), magnesium ion (Mg2+), and total iron (TFe). The proportion of macropores (>50 nm) increases by 19%, which improves the diffusion coefficient of the product layer by one to two orders of magnitude. After 25 days of reaction, the degree of mineralization and hydrogen production reaches 0.15 mmol/kgBS and 1.82 mmol/kgBS, respectively, representing increases of 1.67-fold and 1.26-fold compared with the carbonated water system. This study proposes a novel approach for improving mineralization and hydrogen production efficiency using CO2 nanobubbles, which provides technical guidance for CO2 geological sequestration.
1 October 2026 in Physics of Fluids
Subsurface fluid flow induces particle detachment and alters the petrophysical properties of unconsolidated sandstone. Although particle detachment and changes in hydraulic conductance have been observed, the roles of interparticle cementation and fluid–solid coupling in controlling pore-scale particle detachment have not been quantitatively investigated. In this work, a computational fluid dynamics coupled with the bonded discrete element method was employed to quantify the dynamic process of particle detachment. A pore model of bonded particles was constructed to investigate how flow velocity and cementation strength control particle detachment in unconsolidated sandstone. The results show that a critical velocity exists above which particles start to detach from the pore skeleton. The critical velocity exhibits a linear correlation with cementation strength. An empirical detachment coefficient (De), which is proportional to flow velocity and inversely proportional to cementation strength, was proposed to characterize the detachment of particles. Specifically, three distinct detachment regimes are identified: no detachment (De ≤ 1.67 × 10−3), surface detachment (1.67 × 10−3 < De ≤ 3.33 × 10−3), and pore collapse (De > 3.33 × 10−3). Under surface detachment, the pore skeleton remains largely intact with only surface erosion. When pore collapse occurs, large clusters of particles detach, leading to significant alteration of pore structure. Moreover, the relative change in apparent hydraulic conductance decreases with increasing cementation strength but increases with flow velocity. A stepwise jump in hydraulic conductance is observed during the transition from surface detachment to pore collapse.
24 May 2026 in SSRN Electronic Journal
CO2 mineralization is currently the safest permanent carbon sequestration solution. However, under natural geological conditions, CO2 mineralization occurs at an extremely low rate, typically taking hundreds or even millions of years. Herein, CO2 nanobubbles are employed as a new possible alternative to accelerate carbon mineralization and simultaneously generate hydrogen in peridotite, and the acceleration mechanisms of CO2 nanobubbles are brought to light. The findings indicate that CO2 nanobubbles enhance the supersaturation of CO2 in the aqueous phase and promote the dissolution of peridotite particles. Mineralogical and spectroscopic analyses further confirmed accelerated silicate dissolution and carbonate precipitation in the nanobubble system. Notably, CO2 nanobubbles increase the macropore proportion by approximately 28% and enhance the product layer diffusion coefficient from 1.08×10-16 m2·s-1 to 11.89×10-16 m2·s-1. The ultimate mineralization degree and hydrogen yield of the CO2 nanobubble system are approximately 2.08-fold and 1.45-fold that of the carbonated water system, respectively, corresponding to an additional 53.7 kg of CO2 sequestered and 2.34 g of H2 generated per tonne of peridotite. Furthermore, the generation of H2 is related to changes in the interfacial water structure and the oxidation of Fe(II), in which Fe(II) may act as an electron donor for proton reduction. This research provides a pathway for efficient CO2 sequestration and hydrogen generation, which provides theoretical assistance for CO2 geological sequestration and energy transition.