Zhimin Liu

Zhimin Liu

Auto-generated profile, based on publicly available information

Zhimin Liu

Institute of Plasma Physics Hefei Institutes of Physical Science Chinese Academy of Sciences

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 April 2022 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
YXYahong Xie
Yahong Xie
YXY. L. Xie
Y. L. Xie
SLS. Liu
S. Liu
YXY. J. Xu
Y. J. Xu
LLL. Z. Liang
L. Z. Liang
CHC. D. Hu
C. D. Hu
The experimental advanced superconducting tokamak (EAST) is one of the fully superconducting tokamaks. A high-power neutral beam injector (NBI) system consisting of two injectors (EAST-NBI) was employed on EAST for plasma heating and current driving. The designed deuterium beam energy is 50-80 keV, beam power is 2-4 MW, and the beam duration is 10-100 s. Each beamline is equipped with two hot cathode ion sources and can be operated individually. In order to support the planned physics research on EAST, the NBI-2 was shifted from port F to port D, and at the same time, its injection direction was changed from counter-injection to co-injection. Furthermore, the high power ion source was optimized with better feedback control for stable long pulse beam, and a new technology of beam re-turn on was also developed and applied aiming at long pulse beam injection. Details of the NBI status will be presented in this article.

14 October 2023 in Fusion Engineering and Design
Verified
Journal Article
Closed access
BLBo Liu
Bo Liu
ZLZhimin Liu
Zhimin Liu
CJCaichao Jiang
Caichao Jiang
JWJianglong Wei
Jianglong Wei
SCShiyong Chen
Shiyong Chen
YXYuanlai Xie
Yuanlai Xie

1 October 2024 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
BLBo Liu
Bo Liu
XPXufeng Peng
Xufeng Peng
YGYuming Gu
Yuming Gu
YYYuwen Yang
Yuwen Yang
YLYufan Li
Yufan Li
JWJianglong Wei
Jianglong Wei
Due to the high stability and less maintenance, the radio frequency (RF) driven ion source is preferred for the neutral beam injection (NBI) system. In a popular design of the RF ion source for NBI application, a Faraday shield (FS) is installed inside the RF plasma driver to protect the discharge tube. However, the FS also brings some drawbacks, such as lowering the RF power transfer and increasing the processing difficulty. A prototype of the RF plasma driver without FS and with mature manufacturing technology has been developed by using a water-cooled discharge tube. After basic testing, this prototype was further tested under the RF plasma discharge experiments in views of high power, long pulse, and long term. The reliability and its plasma characteristics were the focus of these experiments, also for the hidden issues. The results show that the prototype could generate stable and high-density plasma without any damage or sputtering mark. An RF plasma discharge of 50 kW and 20 s has been achieved. The expected frequency tuning was equally effective on the prototype. Moreover, compared to the RF plasma driver with FS, the prototype could produce higher electron density in the extraction region under the same RF power. Of course, some of the shortcomings of the prototype have also been exposed in the experiments and will be improved in subsequent experiments.

1 September 2022 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
CSChao Shi
Chao Shi
ZLZhimin Liu
Zhimin Liu
LLLizhen Liang
Lizhen Liang
WLWei Liu
Wei Liu
CLChao Li
Chao Li
ZSZeyang Song
Zeyang Song
Neutral Beam Injection (NBI) is one of the four efficient ways of assistant heating on the Experimental Advanced Superconducting Tokamak (EAST) device. Measures have been taken to ensure more reliable monitoring of NBI components’ thermal data. Infrared thermometers, unlike surface-mounted thermocouples, have the advantage of non-contact and thus will not cause interference and get far less chance of malfunctioning [Childs et al., Rev Sci. Instruments 71, 2959–2978 (2000)]. In this paper, the remote infrared temperature measurement with optical fiber is reported to meet the requirement of the EAST-NBI diagnostic system. Some tests have been conducted on the remote infrared temperature measurement under the working condition, and an atmospheric propagation simulation was performed to estimate the atmosphere absorption. The results indicate that the detector’s response is in line with the theory, and the atmosphere absorption within a certain wavelength should not be ignored. Temperature measurement error is within one percent at temperatures above 200 °C. So, for the temperature range of 200–600 °C, the remote infrared temperature measurement by the optical fiber can fully meet its expectation.

11 April 2023 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
JPJunjun Pan
Junjun Pan
CJCaichao Jiang
Caichao Jiang
ZLZhimin Liu
Zhimin Liu
YXYahong Xie
Yahong Xie
SLSheng Liu
Sheng Liu
WLWei Liu
Wei Liu
The fundamental requirements for experimental advanced superconducting tokamak neutral beam injection (EAST-NBI) are high power and long pulse. The electrostatic probe’s inherent properties, which affect the probability of electrode ignition, cause the extraction beam current to decrease with increasing extraction time in the probe feedback mode of arc power. A power feedback technique of arc power supply is suggested to stabilize the beam current and lengthen the extraction time. The output power of the arc power supply is adjusted via feedback to keep the plasma density in the arc chamber largely steady by multiplying the output voltage and current. The beam current decrease in the arc power feedback mode is substantially smaller than that of the probe feedback, which is helpful for extending the extraction time.