Аleksii Tsapko

Аleksii Tsapko

Auto-generated profile, based on publicly available information

Аleksii Tsapko

Kyiv National University of Construction and Architecture

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YTYuriy Tsapko
Yuriy Tsapko
OHOleksandra Horbachova
Oleksandra Horbachova
АTАleksii Tsapko
Аleksii Tsapko
SMSerhii Mazurchuk
Serhii Mazurchuk
DZDenys Zavialov
Denys Zavialov
NBNataliia Buiskykh
Nataliia Buiskykh
The creation of environmentally friendly protective materials for building structures made of wood could make it possible to influence the processes of stability and the physical-chemical properties at the thermal modification of hornbeam wood over a certain time. That necessitates studying the conditions for investigating phase transformations when the timber is exposed to high temperature, as well as establishing the mechanism of hornbeam wood thermal modification. Given this, a mathematical model of the phase transformation process during the transfer of heat flux to a sample was built. Based on the derived dependences, it was established that when hornbeam wood is exposed to temperature treatment, it undergoes endothermic phase transformations characterized by the heat absorption and change in the color of hornbeam wood. In particular, at a temperature of 200 °C, the temperature in the wood decreases by 5 % due to the chemical changes in the structure of cell wall components (lignin, cellulose, and hemicellulose). It was found that the process of thermal modification is accompanied by the decomposition of hemicellulose and the amorphous part of cellulose, a decrease in moisture absorption, as well as a decrease in the volume of substances that are a medium for the development of fungi. In addition, lignin and the resulting pseudo lignin undergo a process of polymerization and redistribution throughout the cell volume. At the same time, they give the cell walls higher density, hardness, increase hydrophobicity (water repellency), thereby reducing the ability to absorb moisture and swell. It was established that the most effective parameter of phase transformations is the temperature and aging duration. The results of moisture absorption have been given; it has been found that over 6 hours of modified timber exposure, its moisture absorption decreases by more than 10 times, which allows its application at facilities with high humidity

30 August 2016 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YTYuriy Tsapko
Yuriy Tsapko
SGSergii Guzii
Sergii Guzii
MRMykhailo Remenets
Mykhailo Remenets
AKAnastasiia Kravchenko
Anastasiia Kravchenko
OTOleksii Tsapko
Oleksii Tsapko
An analysis of unforeseen fires and explosions at ammunition storage sites was conducted and it was found that one of the biggest risks is their fire hazard as storage of such products is realized using wood, both in building construction and packaging products, and necessity of efficient fire retardant treatment was established. To determine efficiency when developing fire retardant coatings studies were conducted for the determination of the combustibility group of wood in terms of weight loss and raise of the flue gas temperature, and it was found that when treating of wood with coatings, the mass loss did not exceed 5 % and the temperature did not exceed 260 ºC. The results of the determination of the efficiency of fire retardant treatment of wood with geocement and organic­mineral coatings showed that the material burn­out and structural failure did not occur when exposed to high­temperature flame. Studies to determine the quality of the fire retardant treatment of wood with a coating have shown that the rate of wood charring in case of untreated sample was 2 mm/min, and in case of samples treated with fire retardant agents it did not exceed 0.5 mm/min which allowed us to conclude as to feasibility of the use of fire retardants based on inorganic and organic binding materials for the treatment of wooden structures. To assess the effectiveness of the fire retardant treatment of structures made of wood, the duration of magnesium flame impingement on the surface of the flame of wood treated with fire retardant agents was studied, and it was found that the sample treated with organic­mineral protective coating prevented impact of high temperature and rate of wood charring more efficiently due to the creation of the swollen coke layer than coatings based on inorganic compounds, the mechanism of action of which was aimed at heat isolation.

30 June 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YTYuriy Tsapko
Yuriy Tsapko
RLRuslan Likhnyovskyi
Ruslan Likhnyovskyi
АTАleksii Tsapko
Аleksii Tsapko
VKVitalii Kovalenko
Vitalii Kovalenko
OSOksana Slutska
Oksana Slutska
YGYuriy Gulyk
Yuriy Gulyk
An issue related to the use of foaming agents to extinguish fires involving flammable liquids is to ensure the efficiency of vapor insulation of flammable liquid and the foam stability during operation. Therefore, the object of research was a change in the insulating properties of the foaming agent film when interacting with a polar combustible substance. It has been proven that the presence of foaming agent on a flammable liquid leads to the formation of an insulating film on the surface resistant to the combustion temperature of the liquid, due to which re-ignition shifts towards longer time. A film of foaming agent was formed on the surface of the flammable liquid by leaking from the screen, which led to the insulation of the surface. The measured contact area of the foaming film with the electrode was more than 6.2·10-3 m2, which indicates the formation of a barrier for temperature, which collapses over time. According to experimental data on changes in electrical resistance, the critical contact area of the foaming film with the electrode was calculated, at which the film is destroyed. Based on the derived dependences, the change in the process of mass transfer of the foaming film to a flammable liquid was calculated, equal to about 800 s. The maximum possible mass transfer of the foaming agent into the flammable liquid and the reduction of insulation capacity were evaluated. The peculiarities of foam supply to the surface of alcohol through the screen are that the quenching time was about 156 s while the critical intensity of the supply of the working solution of the foaming agent was 0.054 dm3/(m2·s). And the time interval before re-ignition was about 470 s, which is enough to cool the fire site. Thus, there is reason to assert the possibility of targeted control over the processes of extinguishing polar flammable liquids with a foaming agent

25 February 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YTYuriy Tsapko
Yuriy Tsapko
OHOleksandra Horbachova
Oleksandra Horbachova
SMSerhii Mazurchuk
Serhii Mazurchuk
АTАleksii Tsapko
Аleksii Tsapko
KSKostiantyn Sokolenko
Kostiantyn Sokolenko
AMAndrii Matviichuk
Andrii Matviichuk
This paper has analyzed protective materials for timber building structures and established the need to devise reliable methods for studying the process of water absorption by the surface of the construction structure necessary for designing new types of fire-retardant materials. Therefore, it becomes necessary to determine the conditions for the formation of a barrier for water absorption and to elucidate a mechanism for inhibiting the transfer of moisture to the material. In this regard, a mathematical model of the intensity of water mass transfer when using a polymer shell made of organic material as a coating has been built, which makes it possible to assess the effectiveness of the polymer shell by the amount of water absorbed. Based on the experimental data and theoretical dependences, the intensity of absorption of water by wood was calculated; and it has been established that the protective coating reduces the amount of water absorbed by more than 20 times. The results of determining the weight gain by a sample during water exposure indicate an ambiguous impact of the nature of protection on water absorption. In particular, this implies the presence of data sufficient for the qualitative process of inhibition of moisture diffusion; and detecting, on its basis, the point in time when the drop in the coating's efficiency begins. Analysis of the results of experiments reveals that the maximum increase in mass in the case of water absorption by a non-treated sample of wood was 40 % while the increase in the mass of wood samples treated with mixtures of oil and paraffin was less than 28 %. At the same time, the best protection is shown by a mixture of oil with paraffin within 90÷95 %. Thus, there are grounds to assert the possibility of directed regulation of wood protection processes through the use of polymer coatings that can form a protective layer on the surface of the material, which inhibits the rate of absorption of water.

30 August 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YTYuriy Tsapko
Yuriy Tsapko
NBNataliia Buiskykh
Nataliia Buiskykh
RLRuslan Likhnyovskyi
Ruslan Likhnyovskyi
OHOleksandra Horbachova
Oleksandra Horbachova
АTАleksii Tsapko
Аleksii Tsapko
MSMaryna Sukhanevych
Maryna Sukhanevych
The issue related to using dry wood products for building structures is to ensure their stability and durability during operation while it is necessary to take into consideration changes in their properties and structure. Therefore, the object of this study was pine wood struck by drying out. It is proved that in the process of drying, wood porosity decreases, and, accordingly, the tensile strength, depending on the degree of damage by the fungus. Specifically, with the area of damage in the range of 30‒50 %, the strength limit decreases by more than 1.3 times, and if the fungus affects the area within 80÷100 %, the wood becomes softer, more ductile while the strength limit is reduced by 1.1 times. Based on the results of physicochemical studies, discrepancies in the IR spectra were identified, indicating structural changes in the constituent components of wood. There is a decrease or absence of intensities of absorption bands of some functional groups and the appearance or intensification of others. Wood samples, in determining the highest calorific value, show a difference in values, which is explained by structural changes in wood components caused by biological processes. Thermogravimetric analysis data indicate complete burnout of dry pine wood. However, for wood with tree stands not weakened by drying, the coke residue burns out at a higher temperature. Wood with blue pigmentation affected by microorganisms has significant differences in the heating area of 400÷700 °C. The nature of coke burnout allows us to make assumptions about the different qualitative and quantitative composition of the coke residue, which is formed due to structural changes. The practical significance is the fact that the results of determining the properties and structure of dry wood make it possible to establish the operating conditions for articles and building structures

31 October 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YTYuriy Tsapko
Yuriy Tsapko
OHOleksandra Horbachova
Oleksandra Horbachova
SMSerhii Mazurchuk
Serhii Mazurchuk
АTАleksii Tsapko
Аleksii Tsapko
KSKostiantyn Sokolenko
Kostiantyn Sokolenko
AMAndrii Matviichuk
Andrii Matviichuk
This paper reports the analysis of the biological destruction of timber and the use of protective materials, which established that the scarcity of data to explain and describe the process of bioprotection, neglect of environmentally friendly agents lead to the biodegradation of timber structures under the action of microorganisms. Devising reliable methods for studying the conditions of timber protection leads to designing new types of protective materials and application technologies. Therefore, it becomes necessary to determine the conditions for the formation of a barrier for bacteria permeability and to establish a mechanism for inhibiting material biodegradation. Given this, the dependence has been derived to determine the proportion of destroyed material under the effect of microorganisms when using an antiseptic-hydrophobicizer, which makes it possible to evaluate biopenetration. Based on the experimental data and theoretical dependences, the share of destroyed timber was determined under the effect of microorganisms, which is equal to 1 for natural timber. At the same time, this value for thermally modified timber is 0.033, and, when it is protected with oil ‒ 0.009, respectively, exposed to the action of microorganisms for 60 days. It should be noted that the presence of oil, wax, and azure leads to blocking the timber surface from penetration. Such a mechanism underlying the effect of protective coating is likely the factor in the process adjustment, due to which the integrity of the object is preserved. Thus, a polymer shell was created on the surface of the sample, significantly reducing the penetration of microorganisms inside the timber, while the loss of timber mass during biodestruction did not exceed 2.5 %. Therefore, there are grounds to assert the possibility of targeted control over the processes of timber bio-penetration by using coatings capable of forming a protective film on the surface of the material