This paper presents a multi-bit reconfigurable intelligent surface (RIS) with a high phase resolution, capable of beam-steering in the azimuthal plane at sub-6 Gigahertz (GHz). Field trials in realistic indoor deployments have been carried out, with coverage enhancement performance ascertained for three common wireless communication scenarios. Namely, serving users in an open lobby with mixed line of sight and non-line of sight conditions, communication via a junction between long corridors, and a multi-floor scenario with propagation via windows. This work explores the potential for reconfigurable intelligent surface (RIS) deployment to mitigate non-line of sight effects in indoor wireless communications. In a single transmitter, single receiver non-line of sight link, received power improvement of as much as 40 dB is shown to be achievable by suitable placement of a RIS, with an instantaneous bandwidth of at least 100 MHz possible over a 3 to 4.5 GHz range. In addition, the effects of phase resolution on the optimal power reception for the multi-bit RIS have been experimentally verified, with a 2.65 dB improvement compared to a 1-bit case.
1 January 2017 in IET Microwaves, Antennas & Propagation
In this study, a novel dual‐band multiple‐input multiple‐output (MIMO) rectangular dielectric resonator antenna (DRA) for Worldwide interoperability for microwave access (WiMAX) (3.4–3.7) GHz and wireless local area network (WLAN) (5.15–5.35) GHz applications is proposed and investigated. The design operates at fundamental TE δ11x , TE 1δ1y and higher order TE δ21x , TE 2δ1y modes, excited through two coaxial probes, symmetrically placed adjacent to the DRA. A compact design is achieved by stacking a high permittivity material. The obtained impedance bandwidth at 3.6 GHz is 9.97% and at 5.2 GHz is 8.88%. Measured antenna gain through both ports at 3.6 GHz is 5.7 dBi and at 5.2 GHz is 6.61 dBi, respectively. Isolation achieved at 3.6 GHz is −13 dB and at 5.2 GHz is −16 dB, respectively. Co‐ and cross‐polarisation, radiation efficiency, diversity gain, envelope correlation and mean effective gain of the proposed design are measured. Results show that the proposed design is suitable for use in MIMO WiMAX/WLAN applications.
10 April 2024 in IEEE Open Journal of Antennas and Propagation
In this paper, for the first time we present the complete design of a dynamic metasurface antenna (DMA) array at the 60 GHz millimeter-wave (mmWave) industrial, scientific, and medical (ISM) band. First, a novel complementary electric inductive-capacitive (CELC) metamaterial element (unlike conventional rectangular CELC) is designed to resonate around 60.5 GHz. The proposed CELC meta-element in its resonance state manifests dispersive characteristics and exhibits significant left-handed metamaterial properties such as negative group refractive index, negative effective permittivity, and negative group velocity, which are thoroughly elucidated. A low-loss V-band planar substrate-integrated waveguide (SIW) structure is designed at dominant $TE_{10}$ to excite the CELC meta-element by an in-plane magnetic field. Two PIN diodes are loaded in the small capacitive gap between the CELC meta-element and the SIW structure. The switching state of the PIN diodes readily renders the meta-element either radiating or non-radiating. The difference between radiating and non-radiating states is more than 11 dB. Consequently, a fully addressable digital tunable DMA element is formed. Then, a one-dimensional DMA is designed by embedding 16 such meta-elements into the upper conducting wall of the edge-fed SIW structure for electronic steering with high gain, high radiation efficiency, and low side lobe levels. The radiation state of each CELC meta-element is dynamically controlled through a high-speed field programmable gate array (FPGA). The DC biasing network for PIN diodes at such high frequency is meticulously designed and integrated using 4-layer standard printed circuit board (PCB) technology. The parallelized biasing network of PIN diodes through a high-speed FPGA enables agile dynamic control over the radiation pattern of the entire digitally coded metasurface aperture. Versatile beam synthesis (such as narrow beams, wide beams, and multiple beams) is achieved based on different digital coding combinations. The prototypes of the single DMA element and 16-element 1-dimensional DMA array are fabricated and verified through practical measurements. Simulated and measured results show good agreement. The beam-switching agility is quantified and observed to be within 5 ns, indicating significant promise for mmWave applications with ultra-low latency. The proposed DMA is a potential enabler to unfold a diverse range of next-generation mmWave wireless applications such as agile electronic beam-steering, adaptive beamforming and beam-shaping, holographic computational imaging, mmWave industrial wireless communication, cognitive radars, as well as integrated sensing and communication (ISAC).
12 April 2021 in IEEE Antennas and Wireless Propagation Letters
The microwave frequency band typically used for wireless communications will soon become saturated and will no longer be able to fulfill the high bandwidth demands of modern communication networks. Terahertz (THz) communication has appeared as a highly attractive, future-generation wireless technology that offers higher spectral bandwidth and, therefore, higher data rates. However, the full exploitation of THz technologies is contingent upon the availability of energy-efficient sources and devices. In this letter, we present a fabrication and measurement of a microscale planar inverted cone antenna array made of gold. Using an ungrounded coplanar waveguide (CPW) feed, the microfabricated structure provides a bandwidth of 37.9% with the resonant frequency of 0.925 THz. Given the cost of microfabrication is reduced substantially with rapid technological advancements, the results of this letter suggest that high-speed THz communications can be realized for wide-scale applications.
1 April 2016 in IET Microwaves, Antennas & Propagation
This study presents work carried out on a multiband‐dielectric resonator antenna (M‐DRA) for long‐term evolution (LTE) application. A new stack M‐DRA is introduced by using two dielectric resonators of different permittivities, stacked on top of each other. The M‐DRA is excited using a coaxial probe. The introduction of a finite planar conducting wall reduces the overall size of the proposed M‐DRA. It operates at LTE band‐VI (828–880 MHz), GSM 1800/1900 and UMTS 2100 for S11 <−10 dB. The measurements performed with a fabricated antenna showed good agreement with the simulated results.
The 57–71 GHz millimeter-wave (mmWave) Industrial, Scientific, and Medical (ISM) band holds significant potential for enhancing the performance of next-generation industrial wireless applications. This paper first presents the design and analysis of a compact and high-performance 8-element series-fed frequency beam-scanning array designed to cover the entire 21.87% fractional bandwidth of the 57–71 GHz ISM band. Using this as a subarray, a hybrid parallel-series feed topology is designed to construct a 64-element (8 × 8) planar array with high-gain directional beams. The planar array provides a peak measured gain of 20.12 dBi at 64 GHz and maintains a flat gain of over 19.23 dBi throughout the band, with a 1 dB gain bandwidth of 13 GHz. Its narrow directional beams provide an average half-power beamwidth of 9.7° and 11.78° in the elevation and azimuth planes, facilitating point-to-point mmWave connectivity and high-resolution beam scanning. The inherent phase variation of the series-fed topology is employed to produce a beamscanning range of 40° within the 57–71 GHz band, with a scan loss of less than 1 dB. The proposed array is a low-cost, and reproducible solution for seamless integration with V-band mmWave equipment, as elucidated through practical demonstration frameworks using mmWave power sensor and EK1HMC6350 evaluation board. The proposed array is well-suited for emerging industrial wireless sensing and imaging applications, and mmWave frequency scanning radars. Its versatility extends to various 60 GHz protocols such as IEEE 802.11ay, IEEE 802.11ad, IEEE 802.15.3c/d, WirelessHD, and other customized industrial protocols such as WirelessHP.