This article presents a comprehensive review of mobile terminal antenna researches performed in the past seven years and the current challenges related to the user’s influence on the performance of fifth generation (5G) terminal antennas. The main challenges for designing of mobile terminal antennas are to meet the compact size requirements of built-in structures and their multiband capabilities. The antenna design techniques that are used to achieve broader operating bandwidths with smaller antenna dimensions will be first discussed. This is followed by the effects of user interactions with the head/hand for mobile antennas, in terms of radiation efficiency and consequently, the correlation of Multiple Input Multiple Output (MIMO) antenna systems. The ultimate aims of this survey article are as follows: 1) to highlight the different frequencies of mobile terminal antennas for different applications, 2) to highlight mobile terminal antennas which have been developed for 5G application, 3) to study and discuss the effects of user’s hand on 5G mobile terminal antennas, 4) to discuss the research gap, issues and challenges in the field of user’s effects on mobile terminal antennas for 5G applications. In addition to that, an investigation of the users’ hand effects on two MIMO mobile terminal antennas operational in the sub-6GHz 5G band is presented. This investigation, performed using two MIMO antennas is an attempt to formulate guidelines on efficient mobile terminal antenna design in the presence of user’s hand in C Band (from 3.4 to 3.6 GHz) and LTE-U Band 46 (from 5.15 to 5.925 GHz).
A printed compact monopole antenna based on a single negative (SNG) metamaterial is proposed for ultra-wideband (UWB) applications. A low-profile, key-shaped structure forms the radiating monopole and is loaded with metamaterial unit cells with negative permittivity and more than 1.5 GHz bandwidth of near-zero refractive index (NZRI) property. The antenna offers a wide bandwidth from 3.08 to 14.1 GHz and an average gain of 4.54 dBi, with a peak gain of 6.12 dBi; this is in contrast to the poor performance when metamaterial is not used. Moreover, the maximum obtained radiation efficiency is 97%. A reasonable agreement between simulation and experiments is realized, demonstrating that the proposed antenna can operate over a wide bandwidth with symmetric split-ring resonator (SSRR) metamaterial structures and compact size of 14.5 × 22 mm2 (0.148 λ0 × 0.226 λ0) with respect to the lowest operating frequency.
24 January 2018 in IEEE Transactions on Electromagnetic Compatibility
A dramatic evolution can be observed in cellular wireless communication. It started from analog 2G (global system for mobile communication) toward high-data-rate systems such as 3G (wideband code-division multiplexing access), 3.5G (high-speed packet access), 4G (long-term evolution (LTE) and LTE advanced), and currently converging in a more optimized and compact 5G (orthogonal frequency-division multiple access) form. The main challenges for designing of mobile terminal antennas are the compact size requirement of the built-in structure, multiband capabilities, and the number of integrated antennas that form a multiple-input multiple-output (MIMO) terminal system. Moreover, they are required to fulfill all performance and safety standards. For mobile antennas, their radiation efficiency may be affected by the interaction of user head/hand, which consequently affects the correlation of MIMO antenna systems. This paper provides an overview of user effect on mobile terminal antennas in the last seven years. An overview of the Cellular Telecommunication and Internet Association specifications for mobile terminal antennas will first be explained. This is followed by a discussion on the user’s effects on MIMO parameters, channel capacity on mobile terminal antennas, and millimeter-wave applications prior to the presentation of recent technologies that are aimed at improving the antenna performance. Finally, a perspective and potential future investigations on mobile terminal antennas will be discussed in the conclusion.
1 April 2016 in IET Microwaves, Antennas & Propagation
This study presents work carried out on a multiband‐dielectric resonator antenna (M‐DRA) for long‐term evolution (LTE) application. A new stack M‐DRA is introduced by using two dielectric resonators of different permittivities, stacked on top of each other. The M‐DRA is excited using a coaxial probe. The introduction of a finite planar conducting wall reduces the overall size of the proposed M‐DRA. It operates at LTE band‐VI (828–880 MHz), GSM 1800/1900 and UMTS 2100 for S11 <−10 dB. The measurements performed with a fabricated antenna showed good agreement with the simulated results.
6 September 2017 in IET Microwaves, Antennas & Propagation
A multiband monopole antenna with minimised ground plane influence for portable devices is presented. This antenna operates at LTE band 13 (0.746–0.787 GHz), GPS, LTE band 11 (1.427–1.495 GHz), LTE band 3 (1.71–1.88 GHz), WLAN (2.4–2.48 GHz) and WiMAX (3.3–3.88 GHz) with at least −6 dB of reflection coefficient. The performance of antennas for portable devices is commonly influenced by the ground plane to result in variation in terms of operating frequency, impedance bandwidth and radiation pattern. Via a parametric investigation of the antenna geometry and its integration with peripherals devices, it is validated that the influence of the ground plane is minimised by adjusting the feed position. This in turn reduces the current distribution on the ground plane. It is also noticed that the impedance matching level is also more robust with the reduction of ground plane influence. The antenna features an omnidirectional radiation pattern across the all operating frequencies. Fabrication and assessment of the fabricated antenna indicated a close agreement with simulations.
1 January 2018 in Progress in Electromagnetics Research C