11 April 2016 in Journal of Control Science and Engineering
We present a comparative study of model predictive control approaches of two-wheel steering, four-wheel steering, and a combination of two-wheel steering with direct yaw moment control manoeuvres for path-following control in autonomous car vehicle dynamics systems. Single-track mode, based on a linearized vehicle and tire model, is used. Based on a given trajectory, we drove the vehicle at low and high forward speeds and on low and high road friction surfaces for a double-lane change scenario in order to follow the desired trajectory as close as possible while rejecting the effects of wind gusts. We compared the controller based on both simple and complex bicycle models without and with the roll vehicle dynamics for different types of model predictive control manoeuvres. The simulation result showed that the model predictive control gave a better performance in terms of robustness for both forward speeds and road surface variation in autonomous path-following control. It also demonstrated that model predictive control is useful to maintain vehicle stability along the desired path and has an ability to eliminate the crosswind effect.
1 June 2016 in Aerospace Science and Technology
SSSiti Ruhliah Lizarose Samion
Siti Ruhliah Lizarose Samion
29 July 2013 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Previous methods for the evaluation of the sound quality in vehicle interiors focused on the linear regression analysis of subjective sound quality metrics using statistics and estimations of subjective sound quality values by neural networks. Recently, sound quality evaluation using subjective measures has focused on identifying sound quality metrics which can predict subjective responses. It has been used to study a variety of subjective measures such as the four parameters used by Zwicker, but it is difficult to identify highly correlated sound quality metrics with the jury test. The Mahalanobis distance is a useful method to reduce the number of dimensions and to develop measures based on the correlation between the various variables. In particular, the Mahalanobis distance can be used as a new sound quality metric because it can convert the sound quality that is represented by several measures to a single value. In this study, a new sound quality metric is suggested which employs the four parameters used by Zwicker and is based on the Mahalanobis distance in order to predict subjective responses in sound quality evaluation. In addition, in order to calculate the Mahalanobis distance more accurately, after using data from a number of vehicles, sound quality metrics were reselected to remove those that do not require correlation analyses between each metric. Finally, we verified that the logarithmic Mahalanobis distance can be used not only as a new sound quality metric through correlation analysis with a jury test but also as a criterion to determine the vehicle quality. In order to verify the reliability of the regression equation, arbitrary vehicle data are applied to the regression equation. The regression equation using the logarithmic Mahalanobis distance is validated by the listening results, and the regression results after applying arbitrary data are similar.
1 March 2005 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
The paper presents a method for analysis of the mechanical behaviour of a crankshaft in a four-cylinder internal combustion engine. The purpose of the analysis was to study the characteristics of the shaft in which the pin and arm parts were assumed to have a uniform section in order to simplify the modal analysis. The results of the natural frequency transfer function and mode shape were compared with those obtained by experimental work. The results obtained from the comparison showed good agreement with each other and consequently verified the analysis model. Furthermore, a prediction of crankshaft characteristics under the firing condition, by using the model, was performed. The study describes a new method for analysing the dynamic behaviour of crankshaft vibrations in the frequency domain based on the initial firing stages. The new method used root mean square values to calculate the energy at each bearing journal and balancer shape modification under the operating conditions.
11 January 2013 in Advanced Materials Research
Exhaust muffler system iscommonly used to reduce noise associated with internal combustion engine exhausts.This paper presents a numerical analysis of transmission loss for exhaust muffler by using transfer matrix method. The objective of this study is to develop the computer program to predict the transmission loss of muffler.The influence of cross sectional area of pipe, effect of muffler length and temperature towards the transmission loss of muffler is discussed as well in present study. The efficiency and capabilities of the computing transmission loss is compared to the experiment results obtained from the previous established research paper.