Yuehe Ge

Yuehe Ge

Auto-generated profile, based on publicly available information

Yuehe Ge

Fuzhou University

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 August 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YGYuehe Ge
Yuehe Ge
CLChengxiu Lin
Chengxiu Lin
YLYujie Liu
Yujie Liu
In this paper, low-profile broadband planar folded transmitarray antennas (FTAs) are proposed and studied based on a novel Fabry–Perot polarizer. A novel element is proposed to carry out high-efficiency transmission, the phase compensation and the 90° polarization rotation at the same time. The element consists of two identical dielectric slabs, sandwiched by three metal layers, and has a thickness of only about $0.1\lambda $ . To verify this element, a transmitarray antenna is first designed and its highly efficient radiation performance is demonstrated by both simulations and the experiments. Low-profile FTAs are then designed and studied. The results show that the advantages of broad bandwidth, high gain, lower profile, planar geometry, and ease of integration can be achieved. The experiments of the FTA antenna demonstrate a 3 dB gain bandwidths of 18% and a peak gain of 25.2 dBi.

13 March 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ZWZhenglong Wang
Zhenglong Wang
YGYuehe Ge
Yuehe Ge
JPJixiong Pu
Jixiong Pu
XCXuxiang Chen
Xuxiang Chen
GLGuowei Li
Guowei Li
ZCZhizhang (David) Chen
Zhizhang (David) Chen
In this paper, an electronically reconfigurable folded reflectarray antenna (ERFRA), which includes 14×14 reflecting elements and features a fully planar compact configuration and wide-angle beam-scanning performance, was developed, fabricated, and tested. A novel reflecting element that is able to carry out cross-polarization rotation and electronically reconfigurable 1-bit compensation phases was first developed. After experimentally demonstrating its feasibility, the new reflecting element was then applied to the design of a 14×14 electronically reconfigurable folded reflectarray antenna, with a planar feed in the center of the reflectarray and a beam-control system based on the field programmable gate array (FPGA). The measurements of the fabricated ERFRA prototype show a wide beam-scanning range, up to ±60°, a peak gain of 17.07 dBi, and an aperture efficiency of about 13.2%.

22 May 2019 in IEEE Access
Verified
Journal Article
Open access
HZHai Zhang
Hai Zhang
XCXuxiang Chen
Xuxiang Chen
ZWZhenglong Wang
Zhenglong Wang
YGYuehe Ge
Yuehe Ge
JPJixiong Pu
Jixiong Pu
In this paper, a fully electronically reconfigurable reflectarray antenna that has 14W14 reflecting and features a higher aperture efficiency elements was designed, fabricated, and tested. A new configuration of the reflecting element was first developed so that all the bias circuit and the PIN diode are arranged on the opposite side of the reflecting surface, avoiding the potential unexpected reflection and aiming at the improvement of the antenna efficiency. The new reflecting element, which has a smaller size (0.365l), was then applied to the design of a 14W14 reflectarray. A field programmable gate array (FPGA) based beam control system was also developed for the realization of electronically beam-scanning performance. The measurements of the prototype of the integrated reconfigurable reflectarray antenna show good beamscanning radiation performance, a peak gain of 19.2 dBi, and an aperture efficiency of about 25%

21 October 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YWYufang Wang
Yufang Wang
YGYuehe Ge
Yuehe Ge
ZCZhizhang (David) Chen
Zhizhang (David) Chen
XLXin Liu
Xin Liu
JPJixiong Pu
Jixiong Pu
YHYang Hao
Yang Hao
We demonstrate a broadband near-100%-efficiency ultrathin metasurface operating at microwave and millimeter-wave frequencies. We develop and employ two orthogonally polarized metallic gratings to form a Fabry–Perot cavity and incorporate a subwavelength metallic double-split-ring resonator at the center of each unit cell. It allows arbitrary amplitude-phase combinations with no coupling between amplitude and phase or between transmitted and reflected waves, leading to the design of an ultrathin but highly efficient broadband metasurface with multiple functionalities. Furthermore, the proposed metasurface can generate diffractive beams with different orders and vortex beams with different orbital angular momentum (OAM) modes in reflection and transmission spaces simultaneously. Both numerical and experimental results verify that the proposed metasurface has superior performance to its counterparts that are based solely on phase control. The proposed metasurface presents a lightweight, low-cost, and easily deployable flat device for microwave and millimeter-wave applications.

8 March 2021 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
GLGuowei Li
Guowei Li
YGYuehe Ge
Yuehe Ge
ZCZhizhang (David) Chen
Zhizhang (David) Chen
Multibeam antennas have found more and more applications in current and future communication systems. In this letter, a low-profile multibeam fully planar folded transmitarray antenna (FTA) based on the bifocal principle is proposed. It consists of a reflectarray, a transmitarray, and a group of identical planar feeding antennas. The transmitarray is developed with the metasurface and achieves high transmission efficiency and 3 b compensation phases. A new technique is proposed to improve the isolations among the feeding antennas by taking advantage of the multiplicity of the feeding elements. As an example, a multibeam FTA operating at the Ku-band was designed, fabricated, and tested. Experimental results achieve a peak gain of 22.7 dBi and a scanning range of ±21°, with a maximum feed isolation of 24 dB.

23 January 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
CLChengxiu Lin
Chengxiu Lin
YGYuehe Ge
Yuehe Ge
TBTrevor S. Bird
Trevor S. Bird
KLKaiting Liu
Kaiting Liu
A method for designing circularly-polarized (CP) horn antenna is proposed, which is based on a standard pyramidal horn with a linear-to-circular polarization transformer. A compact transparent metasurface transformer is first designed to perform linear-to-circular polarization transformation, and then this is inserted in a linearly-polarized standard pyramidal horn to create a CP horn. To validate the CP horn design, both simulations and experiments were conducted and good agreement was obtained. The CP performance achieved a 3-dB axial ratio bandwidth of 7.4%, a maximum gain reduction of 1.1 dB without altering the horn's original size for a light increase in weight and at a small cost increase.