We describe an interferometric technique suitable for determination of piezo-optic coefficients (POCs) in crystals. The method considers real nonparallelism of measured samples, thereby improving the measuring precision of POCs significantly. Corresponding equations are derived for the interferometric half-wave stress method. Using this technique we have determined a complete set of POCs of pure and -doped crystals. The reliability of the data has been confirmed by comparing the effective POCs expressed through the combinations of measured POCs and the effective POCs determined independently using highly precise optical birefringence measurements. Pure and -doped crystals reveal nearly the same magnitudes of POCs. However, :MgO exhibits about 4 times higher resistance with respect to powerful light radiation, making it more suitable for application in acousto-optic devices that deal with superpowerful laser radiation.
For the first time, to the best of our knowledge, we have experimentally determined all of the components of the piezo-optic tensor for monoclinic crystals. This has been implemented on a specific example of triglycine sulfate crystals. Based on the results obtained, the complete elasto-optic tensor has been calculated. Acousto-optic figures of merit (AOFMs) have been estimated for the case of acousto-optic interaction occurring in the principal planes of the optical indicatrix ellipsoid and for geometries in which the highest elasto-optic coefficients are involved as effective parameters. It has been found that the highest AOFM value is equal to for the case of isotropic acousto-optic interaction with quasi-longitudinal acoustic waves in the principal planes. This AOFM is higher than the corresponding values typical for canonic acousto-optic materials, which are transparent in the deep ultraviolet spectral range.
The influence of heating up to 240 degrees Celsius on the Hall voltage, the offset voltage and the resistivity of the as-deposited nanofilms of gold with a titanium adhesive sublayer is investigated. At a temperature of about 150 degrees Celsius, activation of irreversible changes in electrophysical parameters is observed. The possible reason for such behavior is the diffusion of titanium in gold. During repeated heating/cooling sessions, temperature dependencies are gradually stabilized, and the irreversibility of parameters disappears, which confirms the need for previous thermal annealing of nanofilms for use in electronics devices and sensor technology that operate at elevated temperatures. The nature of the stabilized temperature dependences of the Hall voltage and offset voltage allows the use of gold nanofilms with titanium sublayer as an active region of Hall sensors intended, in particular, for the systems of magnetic diagnostics of the new generation of ITER and DEMO fusion reactors.
1 January 2023 in Visnyk of the Lviv University. Series Physics