The field of two-dimensional (2D) materials has witnessed several significant advancements in a short period of time. There have been extensive research efforts dedicated to this field and an expanding community of researchers built around the same. The focus of this review article is on the most recent milestones in several aspects of 2D materials with emphasis on transition metal dichalcogenides, such as improved synthesis and property engineering, approaching this from both experimental and theoretical viewpoints. There is also an attempt at highlighting some emerging material properties that are of interest and use of these 2D materials in several electronic applications.
The growth and properties of alloys in the alternative quaternary alloy system GaAs1−y−zPyBiz were explored. This materials system allows simultaneous and independent tuning of lattice constant and band gap energy, Eg, over a wide range for potential near- and mid-infrared optoelectronic applications by adjusting y and z in GaAs1−y−zPyBiz. Highly tensile-strained, pseudomorphic films of GaAs1−yPy with a lattice mismatch strain of ∼1.2% served as the host for the subsequent addition of Bi. Lattice-matched alloy materials to GaAs were generated by holding y∼3.3z in GaAs1−y−zPyBiz. Epitaxial films with both high Bi content, z ∼ 0.0854, and a smooth morphology were realized with measured band gap energies as low as 1.11–1.01 eV, lattice-matched to GaAs substrates. Density functional theory calculations are used to provide a predictive model for the band gap of GaAs1−y−zPyBiz lattice-matched to GaAs.
Pd films deposited at room temperature have been found to grow epitaxially on GaN grown by metalorganic vapor phase epitaxy (MOVPE). The Pd films were deposited on GaN substrates cleaned by chemicals only, and in a conventional e‐beam evaporation system with a vacuum of ∼1×10−7 Torr. MeV 4He backscattering spectrometry and the Read x‐ray camera were used to evaluate the Pd films. The effects of various chemical etchants—such as aqua regia, HCl:H2O, and HF:H2O—on the epitaxial quality of the Pd films have also been investigated. Ni and Pt films deposited on GaN in a similar manner were also found to be epitaxial.
Laser diodes employing a strain-compensated GaAs1−xBix/GaAs1−yPy single quantum well (SQW) active region were grown by organometallic vapor phase epitaxy (OMVPE). High resolution x-ray diffraction, room temperature photoluminescence, and real-time optical reflectance measurements during the OMVPE growth were used to find the optimum process window for the growth of the active region material. Systematic post-growth in situ thermal anneals of various lengths were carried out in order to investigate the impacts of thermal annealing on the laser device performance characteristics. While the lowest threshold current density was achieved after the thermal annealing for 30 min at 630 °C, a gradual decrease in the external differential quantum efficiency was observed as the annealing time increases. It was observed that the temperature sensitivities of the threshold current density increase while those of lasing wavelength and slope efficiency remain nearly constant with increasing annealing time. Z-contrast scanning transmission electron microscopic) analysis revealed inhomogeneous Bi distribution within the QW active region.