31 January 2023 in Carbon Energy
One of the most unique properties of two‐dimensional carbides and nitrides of transition metals (MXenes) is their excellent water dispersibility and yet possessing superior electrical conductivity but their industrial‐scale application is limited by their costly chemical synthesis methods. In this work, the niche feature of MXenes was capitalized in the packed‐bed electrochemical reactor to produce MXenes at an unprecedented reaction rate and yield with minimal chemical waste. A simple NH4F solution was employed as the green electrolyte, which could be used repeatedly without any loss in its efficacy. Surprisingly, both fluoride and ammonium were found to play critical roles in the electrochemical etching, functionalization, and expansion of the layered parent materials (MAXs) through which the liberation of ammonia gas was observed. The electrochemically produced MXenes with excellent conductivity, applied as supercapacitor electrodes, could deliver an ultrahigh volumetric capacity (1408 F cm−3) and a volumetric energy density (75.8 Wh L−1). This revolutionary green, energy‐efficient, and scalable electrochemical route will not only pave the way for industrial‐scale production of MXenes but also open up a myriad of versatile electrochemical modifications for improved functional MXenes.
22 July 2022 in Accounts of Chemical Research
14 May 2023 in Advanced Functional Materials
14 May 2023 in Advanced Energy Materials
Lithium–sulfur batteries (LSBs) currently suffer from severe polysulfide shuttling, slow redox kinetics at the sulfur cathode, and irreversible dendrite growth at the lithium anode. To address these issues, a dual interfacial engineering strategy on both the cathode and anode is proposed. For the cathode, iminated polyaniline (iPANI) is used to achieve energetic engineering to induce mid‐energy level to the adsorption of polysulfides, and catalyze the redox conversion of sulfur species, and realize morphological engineering via self‐assembly of iPANI onto a scaffold integrated by reduced graphene oxide (rGO) and carbon nanotubes (CNTs), namely iPANI@rGO‐CNTs. For the anode, the highly conductive and lithiophilic nature and porous nanostructure of the iPANI@rGO‐CNTs composite facilitates the uniform deposition of lithium‐ions, significantly preventing the growth of lithium dendrites. Density functional theory calculations suggest that the iminated functional group at the excited state in iPANI can significantly suppress the shuttling effect, catalyze the conversion of sulfur species, and enhance the conversion of the sulfur species on the sulfur cathode. With the synergic effects of the iPANI@rGO‐CNTs nanoreactors, the as‐prepared LSBs deliver an excellent rate capability and outstanding cycling life. This large‐scale production and application of the iPANI@rGO‐CNTs nanocomposite may lead to the eventual commercialization of LSBs.
12 November 2024 in Advanced Materials
The shuttling of lithium polysulfides (LiPSs), sluggish reaction kinetics, and uncontrolled lithium deposition/stripping remain the main challenges in lithium‐sulfur batteries (LSBs), which are aggravated under practical working conditions, i.e., high sulfur loading and lean electrolyte in large‐capacity pouch cells. This study introduces a Ti3C2Tx MXene@CuCo2O4 (MCC) composite on a polyethylene (PE) separator to construct an ultrathin MXene@CuCo2O4/PE (MCCP) film. The MCCP functional separator can deliver superior LiPSs adsorption/catalysis capabilities via the MCC composite and regulate the Li+ deposition through a conductive Ti3C2Tx MXene framework, enhancing redox kinetics and cycling lifetime. When paired with sulfur/carbon (S/C) cathode and lithium metal anode, the resultant 10 Ah‐level pouch cell with the ultrathin MCCP separator achieves an energy density of 417 Wh kg−1 based on the whole cell and a stable running of 100 cycles under practical operation conditions (cathode loading = 10.0 mg cm−2, negative/positive areal capacity ratio (N/P ratio) = 2, and electrolyte/sulfur weight ratio (E/S ratio) = 2.6 µL mg−1). Furthermore, through a systematic evaluation of the as‐prepared Li‐S pouch cell, the study unveils the operational and failure mechanisms of LSBs under practical conditions. The achievement of ultrahigh energy density in such a large‐capacity lithium‐sulfur pouch cell will accelerate the commercialization of LSBs.
24 January 2022 in Exploration
The sulfur cathode of lithium‐sulfur (Li‐S) batteries suffers from inherent problems of insufficient mechanical strength and the dissolution of sulfur and polysulfides. Inspired by the extraordinarily resilient and strong binding force of the Great Wall binder, that is, the sticky rice mortar, we extracted highly branched amylopectin (HBA), the effective ingredient, as a low‐cost, nontoxic and environmentally benign aqueous binder for the sulfur cathode. The HBA‐based cells outperform the Li‐S batteries based on the traditional polyvinyldene diflouride (PVDF) binder and a lowly branched polysaccharide binder. The improved electrochemical performance in the HBA‐based cell could be attributed to two mechanisms. First, the branched structure of the HBA provides enhanced mechanical and adhesive properties, which allow for a robust electronic and ionic conductive framework to be maintained throughout the cathode after extended cycling. Second, the HBA shows enhanced polysulfide retention due to the polymer's abundant lone‐pair rich hydroxyl groups and the formation of C─S bonds between the HBA and polysulfides prohibits the shuttle effect of polysulfides. The improved mechanical properties and polysulfide retention function of the HBA binder facilitate the HBA‐based Li‐S battery to deliver a long cycle life of 500 cycles at 2 C while only displaying a capacity fading of 0.104% per cycle.