One of the most unique properties of two‐dimensional carbides and nitrides of transition metals (MXenes) is their excellent water dispersibility and yet possessing superior electrical conductivity but their industrial‐scale application is limited by their costly chemical synthesis methods. In this work, the niche feature of MXenes was capitalized in the packed‐bed electrochemical reactor to produce MXenes at an unprecedented reaction rate and yield with minimal chemical waste. A simple NH4F solution was employed as the green electrolyte, which could be used repeatedly without any loss in its efficacy. Surprisingly, both fluoride and ammonium were found to play critical roles in the electrochemical etching, functionalization, and expansion of the layered parent materials (MAXs) through which the liberation of ammonia gas was observed. The electrochemically produced MXenes with excellent conductivity, applied as supercapacitor electrodes, could deliver an ultrahigh volumetric capacity (1408 F cm−3) and a volumetric energy density (75.8 Wh L−1). This revolutionary green, energy‐efficient, and scalable electrochemical route will not only pave the way for industrial‐scale production of MXenes but also open up a myriad of versatile electrochemical modifications for improved functional MXenes.
High energy and power density alkali‐ion (i.e., Li+, Na+, and K+) batteries (AIBs), especially lithium‐ion batteries (LIBs), are being ubiquitously used for both large‐ and small‐scale energy storage, and powering electric vehicles and electronics. However, the increasing LIB‐triggered fires due to thermal runaways have continued to cause significant injuries and casualties as well as enormous economic losses. For this reason, to date, great efforts have been made to create reliable fire‐safe AIBs through advanced materials design, thermal management, and fire safety characterization. In this review, the recent progress is highlighted in the battery design for better thermal stability and electrochemical performance, and state‐of‐the‐art fire safety evaluation methods. The key challenges are also presented associated with the existing materials design, thermal management, and fire safety evaluation of AIBs. Future research opportunities are also proposed for the creation of next‐generation fire‐safe batteries to ensure their reliability in practical applications.
2D materials have shown great promise in various applications including solar cells, but their use as light‐harvesting active layers in photovoltaic (PV) devices is limited. Herein, surface‐oxidized antimonene sheets are prepared using a liquid‐phase exfoliation method and employed as an active light absorber material after functionalization. It is shown that 2D antimonene possesses unique surface chemistry that allows it to form photoactive Sb2S3 light absorbers for solar cells under ambient conditions. Under the standard PV testing conditions (AM1.5G), devices fabricated with 2D antimonene‐based light‐harvesting materials deliver a power conversion efficiency (PCE) of up to 4.28%. This novel type of solar cell exhibits outstanding operational stabilities, preserving >90% of the initial PCE after aging for 60 min at a temperature of 85 °C, retaining >95% of the initial efficiency after exposure to continuous light illumination under 1 sun for 180 min, and maintaining its functionality after being underwater for 25 min. This work opens new avenues for research in 2D materials and photovoltaics.