23 November 2023 in Chemical Engineering Science
4 March 2025 in ACS Engineering Au
8 August 2024 in Digital Chemical Engineering
17 September 2024 in ChemRxiv
The projected increase in demand for renewable-based ammonia (NH3) as a hydrogen carrier or sustainable fuel stresses the need for efficient synthesis processes. The enhancement of the NH3 synthesis through in situ NH3 removal was identified as a promising process intensification strategy. This work aims to demonstrate the potential of the in situ removal based on reactor simulations and experimental investigations, by applying the in situ sorption of NH3. Therefore, experiments in a fixed bed reactor filled with a commercial iron catalyst and activated carbon impregnated with manganese chloride as a sorbent were conducted. Modelling of NH3 synthesis, including an ideal separation, allowed the prediction of increase in the NH3 yield, showing potential effects in both, the equilibrium and the kinetic regime of the synthesis reaction. Experiments investigating the formation of NH3 in different arrangements of catalyst and sorbent beds demonstrated the feasibility of sorption under reaction conditions with the selected sorbent. Further, an up to 30 % increase in NH3 yield through in situ sorptive removal, aligning well with model-based predictions, was observed in the respective experiments. Concludingly, this work demonstrates the positive effect of in situ NH3 removal under industrially relevant reaction conditions, confirming the potential of the selected catalyst and sorbent for the targeted process intensification.
24 December 2024 in ChemRxiv
Ammonia production is one of the most important industrial chemical processes, but the synthesis reaction is strongly limited by chemical equilibrium. This is commonly compensated by applying high pressures, but large recycle ratios and purging losses are still unavoidable. Equilibrium limitations can alternatively be evaded by sorption-enhancement, where NH3 is selectively removed from the reaction mixture by a solid sorbent material. One material class commonly applied in this approach are metal halides like MgCl2, as they typically show high NH3 capacity even at elevated temperatures. In this study, a thermodynamic equilibrium model based on Gibbs energy minimization was established that is able to predict the simultaneous NH3 synthesis and sorption equilibrium. After parameterization for metal chloride-based sorbents, the model is used to estimate the potential extent of sorption-enhancement of the NH3 synthesis in equilibrium. For kinetic studies under realistic operation conditions, a reactor model was established using kinetics for both iron and ruthenium-based catalysts. Simulations reveal that near-full conversion is possible in sorption-enhanced NH3 synthesis under a wide range of realistic operating conditions. In that way the integration of a sorbent material into the NH3 synthesis reaction results in increased conversion, but at the same time also allows for a higher NH3 productivity. While it has been demonstrated experimentally before, these findings quantify and emphasize the vast potential of sorption-enhanced NH3 synthesis under a wide range of conditions.