8 June 2015 in Scientific Reports
Efficient photocatalytic water splitting requires effective generation, separation and transfer of photo-induced charge carriers that can hardly be achieved simultaneously in a single material. Here we show that the effectiveness of each process can be separately maximized in a nanostructured heterojunction with extremely thin absorber layer. We demonstrate this concept on WO3/BiVO4+CoPi core-shell nanostructured photoanode that achieves near theoretical water splitting efficiency. BiVO4 is characterized by a high recombination rate of photogenerated carriers that have much shorter diffusion length than the thickness required for sufficient light absorption. This issue can be resolved by the combination of BiVO4 with more conductive WO3 nanorods in a form of core-shell heterojunction, where the BiVO4 absorber layer is thinner than the carrier diffusion length while it’s optical thickness is reestablished by light trapping in high aspect ratio nanostructures. Our photoanode demonstrates ultimate water splitting photocurrent of 6.72 mA cm−2 under 1 sun illumination at 1.23 VRHE that corresponds to ~90% of the theoretically possible value for BiVO4. We also demonstrate a self-biased operation of the photoanode in tandem with a double-junction GaAs/InGaAsP photovoltaic cell with stable water splitting photocurrent of 6.56 mA cm−2 that corresponds to the solar to hydrogen generation efficiency of 8.1%.
1 March 1991 in Japanese Journal of Applied Physics
Low-temperature cleaning of GaAs substrate by atomic hydrogen irradiation has been demonstrated. Atomic hydrogen was provided by dissociation of hydrogen gas, which was carried out in a simple cracking cell with a 1500°C tungsten filament. Auger electron spectroscopy showed that carbon was removed at 200°C and oxygen was removed at 400°C by 30-min atomic hydrogen irradiation. The surface cleaning of GaAs was confirmed by the change of RHEED pattern from halo to streak after the hydrogen irradiation.
14 February 2012 in Energy & Environmental Science
We report ultra-high stacked InGaAs/GaAs quantum dot (QD) solar cells fabricated by the intermittent deposition of In0.4Ga0.6As under an As2 source using molecular beam epitaxy. We obtain a 400-stack In0.4Ga0.6As QD structure without using a strain balancing technique, in which the total number of QDs reaches 2 × 1013 cm−2. Photoluminescence and cross-sectional scanning transmission electron microscope measurements indicate that the In0.4Ga0.6As QD structure exhibits no degradation in crystal quality, no dislocations and no crystal defects even after the stacking of 400 QD layers. The external quantum efficiency and the short-circuit current density of multi-stacked In0.4Ga0.6As QD solar cells increase as the number of stacked layers is increased to 150. Such ultra-high stacks and good cell performance have not been reported for QD solar cells using other material systems. The performance of the ultra-high stacked QD solar cells indicates that InGaAs QDs are suitable for use in high efficiency solar cells requiring thick QD layers for sufficient light absorption.
31 January 2011 in Solar Energy Materials and Solar Cells
1 July 1997 in Optics Letters
We report on a self-starting mode-locked femtosecond Cr:forsterite laser pumped by a diode-pumped Nd:YVO4 laser. The mode locking is initiated by a semiconductor saturable-absorber mirror (SESAM). We also present the measured group delay of the forsterite crystal and the SESAM.
1 June 1992 in Japanese Journal of Applied Physics
Selective epitaxial growth of GaAs on patterned GaAs substrates covered with SiN
x
have been demonstrated at 580°C by using atomic hydrogen irradiation in molecular beam epitaxy. The mechanism of the selective growth is mainly due to the re-evaporation of GaAs from the mask, SiN
x
. Re-evaporation rate of GaAs from the SiN
x
surface is larger than that from the SiO2 surface, and hence the selective growth of GaAs can be more easily achieved using SiN
x
mask. The epitaxial patterns of GaAs have clear crystal facets. In the line and space patterns along [110], (11̄0), (111)B and (211)B faces appear and in the [11̄0] line, (311)A and (111)A faces appear. There are no edge peaking and the side wall definitely reflects the mask edge boundary.