28 July 2023 in ChemElectroChem
Aiming to advance the technical maturity of CO2 electrolysis to formic acid, various gas diffusion layers (GDLs) are investigated for their suitability as carbon‐based substrate for gas diffusion electrodes (GDEs) and their effect on the electroreduction of CO2 to formate. Particular attention lies on the elucidation for the effect of the GDL thickness, hydrophobic treatment, and presence of a microporous layer (MPL) on the GDE performance in terms of Faradaic efficiency. Based on the investigation it is found that the GDL thickness has no discernible influence on the Faradaic efficiency, while a GDE with a hydrophobic treatment of 10 % PTFE outperforms a GDE based on a GDL with 30 % PTFE. Furthermore, the presence of a MPL is found to be of marked importance to achieve relevant current densities given its effect on the focus of the catalyst layer on the GDE surface after spray coating, the wetting, and the electrical conductivity.
21 July 2025 in Methods in Microscopy
Proton exchange membrane electrolysis cells (PEMECs) are a crucial technology for generating “green hydrogen”, a sustainable energy carrier and versatile platform for synthesizing several chemicals. In the life cycle of a PEMEC, various process stages bare risks of accelerated aging, impacting long-term performance. In the stages of transport and storage of water-filled cell assemblies, a common practice in industry, cation contamination or frost can lead to the degradation of the membrane electrode assembly (MEA) even before its operation. Therefore, as an alternative to transporting and storing the MEA in a hydrated state, this work investigates the possibility of drying the MEA within the cell assembly under controlled conditions to prevent such degradation phenomena. Potential drying induced MEA functionality changes were analyzed using in operando methods, focusing on electrical and gas barrier properties. Butler-Volmer kinetics and electrochemical impedance spectroscopy allowed the allocation of potential performance losses to components. Furthermore, in situ and ex situ X-ray computed tomography (XCT) and optical microscopy investigations gave insights into drying-induced morphological changes within the MEA. In total, three distinct morphological changes were observed and consistently identified: membrane swelling, catalyst layer cracking, and reinforcement detachment, with each posing potential limiting factors for the scalability of the controlled drying process. Ultimately, no significant impact on electrical and gas barrier properties was observed, indicating that the drying process and morphological changes did not adversely affect the short-term operation of the PEMEC.