Sergei Ivanov

Sergei Ivanov

Auto-generated profile, based on publicly available information

Sergei Ivanov

Institute of Physics, University of Latvia, 32 Miera str., LV-2169 Salaspils, Latvia

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2025 in Metals
Verified
Journal Article
Open access
PDF file
EBErvins Blumbergs
Ervins Blumbergs
MMMikhail Maiorov
Mikhail Maiorov
ABArtur Bogachov
Artur Bogachov
EPErnests Platacis
Ernests Platacis
SISergei Ivanov
Sergei Ivanov
VPVladimir Pankratov
Vladimir Pankratov
The recycling of nickel–cadmium batteries poses a significant environmental challenge due to cadmium’s high biotoxicity. This study proposes a green method for recovering cadmium from cadmium oxide (CdO) using carbon (coal) in the presence of a molten binary flux (KCl:NaCl = 0.507:0.493, melting point 667 °C). The flux’s relatively low density and conductivity enable cadmium reduction beneath and through the flux layer. Brown coal (5–25 mm) served as the reductant. The reduction of cadmium from cadmium oxide with carbon (brown coal) took place in the temperature range from 667 °C to 700 °C. To enhance the process, electrovortex flows (EVF) were employed—generated by the interaction between non-uniform AC electric currents and their self-induced magnetic fields resembling conditions in a fluidised bed reactor. The graphite crucible acted as both one of the electrodes, with a graphite rod as the second electrode. As Cd and CdO are denser than both the flux and coal, the reduction proceeded below the flux layer. The flux facilitated CdO transport to the reductant, speeding up the reaction. X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirmed the formation of metallic cadmium beneath and within the flux layer. This method demonstrates the feasibility of flux-assisted cadmium recovery without prior mixing and offers a foundation for further optimisation of sustainable battery recycling.

10 July 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
EBErvins Blumbergs
Ervins Blumbergs
MMMikhail Maiorov
Mikhail Maiorov
ABArtur Bogachov
Artur Bogachov
EPErnests Platacis
Ernests Platacis
SISergei Ivanov
Sergei Ivanov
VPVladimir Pankratov
Vladimir Pankratov
The recycling of nickel-cadmium batteries poses a significant environmental challenge due to cadmium’s high biotoxicity. This study proposes a green method for recovering cadmium from cadmium oxide (CdO) using carbon (coal) in the presence of a molten binary flux (KCl:NaCl = 0.507:0.493, melting point 667°C). The flux's relatively low density and conductivity enable cadmium reduction beneath and through the flux layer, resembling conditions in a fluidised bed reactor. Coarse coal (5–25 mm) served as the reductant. To enhance the process, electrovortex flows (EVF) were employed—generated by the interaction between non-uniform AC electric currents and their self-induced magnetic fields. The graphite crucible acted as both one of the electrodes, with a graphite rod as the second electrode. As Cd and CdO are denser than both the flux and coal, the reduction proceeded below the flux layer. The flux facilitated CdO transport to the reductant, speeding up the reaction. X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirmed the formation of metallic cadmium beneath and within the flux layer. This method demonstrates the feasibility of flux-assisted cadmium recovery without prior mixing and offers a foundation for further optimisation of sustainable battery recycling.

8 May 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
SIS L Ivanov
S L Ivanov
DZD Zablotsky
D Zablotsky
The current industrial practice for titanium extraction is a complex procedure, which produces a porous reaction mass of sintered titanium particulates fused to a steel retort wall with magnesium and MgCl2 trapped in the interstices. The reactor temperature is limited to approx. 900 °C due to the formation of fusible TiFe eutectic, which corrodes the retort and degrades the quality of titanium sponge. Here we examine the theoretical foundations and technological possibilities to design a shielded retort of niobium-zirconium alloy NbZr(1%), which is resistant to corrosion by titanium at high temperature. We consider the reactor at a temperature of approx. 1150 °C. Supplying stoichiometric quantities of reagents enables the reaction in the gas phase, whereas the exothermic process sustains the combustion of the reaction zone. When the pathway to the condenser is open, vacuum separation and evacuation of vaporized magnesium dichloride and excess magnesium into the water-cooled condenser take place. As both the reaction and the evacuation occur within seconds, the yield of the extraction is improved. We anticipate new possibilities for designing a device combining the retort function to conduct the reduction in the gas phase with fast vacuum separation of the reaction products and distillation of magnesium dichloride.

27 October 2025 in Metals
Verified
Journal Article
Open access
PDF file
EBErvins Blumbergs
Ervins Blumbergs
MMMikhail Maiorov
Mikhail Maiorov
ABArturs Brekis
Arturs Brekis
EPErnests Platacis
Ernests Platacis
SISergei Ivanov
Sergei Ivanov
VPVladimir Pankratov
Vladimir Pankratov
This study presents a carbon footprint assessment of a novel electroslag method for cadmium (Cd) recovery from spent nickel–cadmium (Ni-Cd) batteries in comparison with the carbon footprints of pyrometallurgical and hydrometallurgical cadmium recovery methods. A comparison of CO2 emissions in three types of technological processes during the recovery of 1 kg of cadmium is carried out. Energy inputs and CO2 emissions are calculated for the electroslag process and compared to conventional methods, such as pyrometallurgical and hydrometallurgical reduction methods. The electroslag process eliminates cadmium vaporization by using molten KCl–NaCl flux and carbon under electromagnetic stirring. Cadmium reduction occurs under a layer of flux, which prevents the contact of the reduced cadmium with the atmosphere. The electroslag process temperature is limited to 700 °C, which is lower than the boiling point of cadmium (767 °C). The electroslag remelting process uses molten KCl–NaCl flux and carbon as a reductant under electrovortex flow stirring. The pyrometallurgical method for extracting cadmium from nickel–cadmium batteries is based on the reduction of cadmium with carbon at high temperatures. In the pyrometallurgical process, coal (anthracite) is used as the carbonaceous material, which can extract 99.92% of cadmium at 900 °C. Cadmium is separated using a vacuum at temperatures ranging from 800 °C to 950 °C for several hours. Hydrometallurgy is a metal extraction process involving chemical reactions that occur in organic or aqueous solutions at low temperatures. The hydrometallurgical process involves a series of acid or alkaline leaches, followed by separation and purification methods such as absorption, cementation, ion exchange, and solvent extraction to separate and concentrate metals from leach solutions.

14 August 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
EBErvins Blumbergs
Ervins Blumbergs
MMMikhail Maiorov
Mikhail Maiorov
ABArturs Brekis
Arturs Brekis
EPErnests Platacis
Ernests Platacis
SISergei Ivanov
Sergei Ivanov
VPVladimir Pankratov
Vladimir Pankratov
This study presents a carbon footprint assessment of a novel electroslag method for cadmium (Cd) recovery from spent nickel-cadmium (Ni-Cd) batteries. The process utilizes molten KCl–NaCl flux and carbon as a reductant under electrovortex flow stirring. Energy inputs and CO₂ emissions are calculated for active process stages and compared to conventional methods. Updated analysis excludes flux melting, recognizing the flux as a non-consumable transport and protection medium. The results highlight the method’s potential for sustainable, continuous cadmium recovery.