Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.
High purity Yb3+ doped Lu2O3 powder has been synthesized by the co-precipitation method. The powders underwent a jet milling at various feed rate using a commercial jet mill machine. It is found that jet milling is very effective in breaking up of large agglomerates without cross-contamination. Median agglomerate size decreased from 8.74 μm to 1.06 μm when jet milled at a feed rate 0.75 lb/hr. There was no noticeable increase in impurities picked up during the jet milling process in the final powder obtained after a sacrificial run that was carried out for the purpose of conditioning the surface of the liner. Homogeneous, uniform, and highly transparent ceramic was obtained from the ceramic hot pressed with the final jet milled powder compared to the one made from as-produced powder where some defects and splotches are often observed. Transmission of the Yb3+:Lu2O3 ceramics obtained from the jet milled powder is very close to the theoretical limit, demonstrating the excellent quality of the transparent ceramic.
We have developed several rugged materials for multiband applications covering the UV, visible, Shortwave-IR (SWIR), Midwave-IR (MWIR) and Longwave-IR (LWIR) wavelength regions. These materials include MILTRAN™ and IR glass which transmit in the SWIR, MWIR and LWIR. MILTRAN™ is > 3 times harder and stronger than ZnS and can provide rugged window or dome materials for broadband sensors. IR glass can be easily made in complex shapes. A combination of MILTRAN™ and IR glass can be used to make achromats for multispectral imaging systems.
We have developed a process for coating individual phosphor particles with different coating compositions. The phosphor is suspended in a solvent containing the appropriate coating material precursors (alkoxides, or metal salts). Coating deposition is via a sol-gel technique. The suspension is sprayed into a hot zone to dry. Coating thicknesses of 10 and 90 nm have been achieved in a single pass. Testing shows that the coated phosphor efficiency is not degraded, while the aging behavior is improved.