Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.
High purity Yb3+ doped Lu2O3 powder has been synthesized by the co-precipitation method. The powders underwent a jet milling at various feed rate using a commercial jet mill machine. It is found that jet milling is very effective in breaking up of large agglomerates without cross-contamination. Median agglomerate size decreased from 8.74 μm to 1.06 μm when jet milled at a feed rate 0.75 lb/hr. There was no noticeable increase in impurities picked up during the jet milling process in the final powder obtained after a sacrificial run that was carried out for the purpose of conditioning the surface of the liner. Homogeneous, uniform, and highly transparent ceramic was obtained from the ceramic hot pressed with the final jet milled powder compared to the one made from as-produced powder where some defects and splotches are often observed. Transmission of the Yb3+:Lu2O3 ceramics obtained from the jet milled powder is very close to the theoretical limit, demonstrating the excellent quality of the transparent ceramic.
We report the latest progress on fabrication of rare earth doped single crystal yttrium aluminum garnet (YAG) core/undoped YAG cladded fibers. Rare-earth doped single crystal core fibers were grown with laser heated pedestal growth methods. In a second step, epitaxial methods were used to grow a single crystalline undoped YAG cladding onto the core fiber. Hydrothermal and liquid phase epitaxy methods utilize the core doped fiber as the seed. X-ray diffraction of cladding reveals an equilibrium (110) morphology. Energy-dispersive X-ray spectroscopy analysis shows there is minimal diffusion of rare-earth dopants into the cladding structure. The use of scandium doping is shown to substitute at the Al3+ site, thereby allowing an additional tunability of refractive index of core structure material besides conventional Y3+ site dopants. The use of these epitaxial growth methods enables material compatibility, tuning of refractive index, and conformal growth of cladding structures onto core fibers for optical devices.
We report on fabrication and optical properties of crystalline cladded single crystal Yb:YAG fiber. Net gain has been demonstrated in the cladded Yb:YAG fiber structures
We report on fabrication improvements of glass cladded single crystal Yb:YAG fiber. Laser characterization using a MOPA architecture was performed. We demonstrate 3.2 W output average power with 14.7 dB gain from a glass cladded 100 µm core Yb:YAG fiber.
We have developed several rugged materials for multiband applications covering the UV, visible, Shortwave-IR (SWIR), Midwave-IR (MWIR) and Longwave-IR (LWIR) wavelength regions. These materials include MILTRAN™ and IR glass which transmit in the SWIR, MWIR and LWIR. MILTRAN™ is > 3 times harder and stronger than ZnS and can provide rugged window or dome materials for broadband sensors. IR glass can be easily made in complex shapes. A combination of MILTRAN™ and IR glass can be used to make achromats for multispectral imaging systems.