Aryl‐ether‐free anion‐exchange ionomers (AEIs) and membranes (AEMs) have become an important benchmark to address the insufficient durability and power‐density issues associated with AEM fuel cells (AEMFCs). Here, we present aliphatic chain‐containing poly(diphenyl‐terphenyl piperidinium) (PDTP) copolymers to reduce the phenyl content and adsorption of AEIs and to increase the mechanical properties of AEMs. Specifically, PDTP AEMs possess excellent mechanical properties (storage modulus>1800 MPa, tensile strength>70 MPa), H2fuel‐barrier properties (7.6 A cm−2current density) and 1.38 W cm−2at 80 °C in H2/O2and H2/air, respectively, along with a specific power (PPD/catalyst loading) over 8 W mg−1, which is the highest record for Pt‐based AEMFCs so far.
Aryl‐ether‐free anion‐exchange ionomers (AEIs) and membranes (AEMs) have become an important benchmark to address the insufficient durability and power‐density issues associated with AEM fuel cells (AEMFCs). Here, we present aliphatic chain‐containing poly(diphenyl‐terphenyl piperidinium) (PDTP) copolymers to reduce the phenyl content and adsorption of AEIs and to increase the mechanical properties of AEMs. Specifically, PDTP AEMs possess excellent mechanical properties (storage modulus>1800 MPa, tensile strength>70 MPa), H2fuel‐barrier properties (7.6 A cm−2current density) and 1.38 W cm−2at 80 °C in H2/O2and H2/air, respectively, along with a specific power (PPD/catalyst loading) over 8 W mg−1, which is the highest record for Pt‐based AEMFCs so far.
1 January 2022 in Journal of the Electrochemical Society
We systematically study anion exchange membrane fuel cells (AEMFCs) based on poly(aryl-co-aryl piperidinium) (c-PAP) copolymers and provide a scalable scenario for high-performance AEMFCs, covering the optimization of the relative humidity (RH), catalyst species, catalyst interfaces, and hydrophobic treatment. Specifically, high-water-permeable c-PAP ionomers in the presence of moderate relative humidity (RH) (75%/100%) can be used to address anode flooding and cathode dry-out issues. The composition of the catalyst layer and the anode hydrophobic treatment significantly impact the power density of AEMFCs. c-PAP-based AEMFCs with optimum catalyst composition achieve a peak power density (PPD) of 2.70 W cm −2 at 80 °C in H 2 -O 2 after hydrophobic treatment. Pt 1 Co 1 /C cathode-based AEMFCs reach a PPD of 1.80 W cm −2 along with an outstanding specific power of 13.87 W mg −1 . Moreover, these AEMFCs can be operated under a 0.2 A cm −2 current density at 60 °C for over 300 h with a voltage decay rate of ∼300 μ v h −1 .
1 March 2021 in Angewandte Chemie International Edition
Poly(alkyl‐terphenyl piperidinium) ionomers and membranes were used for H2–O2 anion exchange membrane fuel cells, and achieved a high power density of 2.58 W cm−2, which is a new record for polyaromatic‐based fuel cells. Details of the study are described by Young Moo Lee and co‐workers in their Research Article on page 7710.
Poly(alkylterphenylpiperidinium)‐Ionomere und ‐Membranen wurden für H2‐O2‐Anionenaustauschmembran‐Brennstoffzellen entwickelt und erreichen eine hohe Leistungsdichte von 2.58 W cm−2, was einen neuen Rekord für Brennstoffzellen auf Polyaromatenbasis darstellt. Details der Studie werden von Young Moo Lee et al. in ihrem Forschungsartikel auf S. 7789 beschrieben.