Poly(fluorenyl- co -aryl piperidinium)-based AEMWEs reach outstanding current density values of 7.68 A cm −2 at 2.0 V with a cell durability of 1000 h.
23 December 2020 in Angewandte Chemie International Edition
Aryl‐ether‐free anion‐exchange ionomers (AEIs) and membranes (AEMs) have become an important benchmark to address the insufficient durability and power‐density issues associated with AEM fuel cells (AEMFCs). Here, we present aliphatic chain‐containing poly(diphenyl‐terphenyl piperidinium) (PDTP) copolymers to reduce the phenyl content and adsorption of AEIs and to increase the mechanical properties of AEMs. Specifically, PDTP AEMs possess excellent mechanical properties (storage modulus>1800 MPa, tensile strength>70 MPa), H2fuel‐barrier properties (7.6 A cm−2current density) and 1.38 W cm−2at 80 °C in H2/O2and H2/air, respectively, along with a specific power (PPD/catalyst loading) over 8 W mg−1, which is the highest record for Pt‐based AEMFCs so far.
15 December 2023 in Angewandte Chemie International Edition
Di-piperidinium crosslinked poly(fluorenyl- co -terphenyl piperidinium) membranes displayed outstanding mechanical strength (∼90 MPa) and durability along with high power density of 2.50 W cm −2 in alkaline exchange membrane fuel cells.
The rational design of the current anion exchange polyelectrolytes (AEPs) is challenging to meet the requirements of both high performance and durability in anion exchange membrane water electrolyzers (AEMWEs). Herein, highly‐rigid‐twisted spirobisindane monomer is incorporated in poly(aryl‐co‐aryl piperidinium) backbone to construct continuous ionic channels and to maintain dimensional stability as promising materials for AEPs. The morphologies, physical, and electrochemical properties of the AEPs are investigated based on experimental data and molecular dynamics simulations. The present AEPs possess high free volumes, excellent dimensional stability, hydroxide conductivity (208.1 mS cm−1 at 80 °C), and mechanical properties. The AEMWE of the present AEPs achieves a new current density record of 13.39 and 10.7 A cm−2 at 80 °C by applying IrO2 and nonprecious anode catalyst, respectively, along with outstanding in situ durability under 1 A cm−2 for 1000 h with a low voltage decay rate of 53 µV h−1. Moreover, the AEPs can be applied in fuel cells and reach a power density of 2.02 W cm−2 at 80 °C under fully humidified conditions, and 1.65 W cm−2 at 100 °C, 30% relative humidity. This study provides insights into the design of high‐performance AEPs for energy conversion devices.
5 January 2023 in Journal of Materials Chemistry A
Hydrophobic side chain grafted poly(fluorenyl-co-aryl piperidinium) ionomers simultaneously possess outstanding peak power density of 2.6 W cm−2 at 80 °C along with durable in situ stability of 0.4 mV h−1 voltage decay rate under 0.6 A cm−2 at 70 °C.