1 December 2018 in Optics and Lasers in Engineering
1 April 2024 in AIP Advances
Material models play a crucial role in finite element analysis, especially for evaluating deformations under high strain rates. This study introduces a straightforward method that combines experiments, numerical simulations, and optimization to identify the parameters of a ductile material model at high strain rates. We conduct ballistic impact tests using a single-stage light gas gun and spherical projectiles on Q235 steel at velocities ranging from 160 to 476 m/s to determine its properties. An iterative inverse finite element analysis helps to refine the Johnson–Cook material model constants, aligning them with the observed crater dimensions on the specimens caused by impacts at various speeds. The model’s predictions for the crater profiles show a good match with the experimental findings across all tested velocities. Simulation outcomes reveal high strain values up to 3.81 and strain rates reaching 41 872 s−1. Moreover, we assess the model’s failure behavior under high strain rates through both perforation resistance tests and simulations on Q235 steel plates of varying thicknesses under ballistic impacts. The successful validation of the Johnson–Cook model for Q235 steel at these rates confirms the efficacy and reliability of our characterization method. This approach can be applied to develop model parameters for different materials under similar strain conditions.
31 May 2022 in Measurement Science and Technology
The evaluation of an object’s 3D shape change during ablation in wind tunnel testing is critical for the optimization of the thermal protection system. However, strong thermal radiation and a harsh environment cause challenges to the traditional measurement methods. A single camera digital micro-mirror device (DMD) projector-structured laser light system is proposed for in-situ 3D shape measurement in a wind tunnel test. A customized DMD combined with a laser source is devised for projecting concentrated full-field high-power structured light stripes. To filter laser speckle noise in projected chessboard images for model calibration, an auto-window Kuwahara adaptive filter is put forward. The 3D shape of a blunt-head cylinder was in-situ measured in a plasma wind tunnel which reached a maximum temperature of 1950 °C. The diameter reconstruction error was within 0.85% (0.17/20.03 mm). With projected laser light and multi-step filters, the ablation process of the front face of a dome-top cylinder at 1950 °C was clearly observed at a long working distance over 1.5 m.
8 July 2021 in Measurement Science and Technology
Digital image correlation (DIC) has inherent limitations in large deformation measurement, such as speckle pattern decorrelation and high computation time cost. A new dots pattern with fixed size and randomly distributed dots is devised for DIC, rather than the traditional grayscale speckle pattern. Topology-based matching correlation (TMC) based on dots pattern is proposed, in which topology connectivity property is used in correlation calculation for images before and after deformation. Experiments on simulated tensile deformation with up to 300% elongation and nitrile-butadiene rubber tensile tests with 260% elongation were designed and results showed that, compared with the incremental-DIC method, the proposed TMC based DIC (TMC-DIC) method could correctly obtain large deformation with no need of updating reference image, less time consumption and smaller errors. The proposed method also has advantages in the applications like real time deformation observation or deformation measurement of large-scale structure.
30 September 2026 in SSRN Electronic Journal
Leaks of metallurgical gases create carbon monoxide exposure and fire hazards in steel production, motivating standoff measurements that can help characterize a suspected release. This study investigates complementary mid-wave and long-wave infrared (MWIR/LWIR) signatures using passive Fourier-transform infrared (FTIR) spectroscopy. MWIR carbon monoxide features indicate a CO-containing plume, while methane features provide additional information about the gas source. Field measurements at a steel plant were performed at approximately 10 m from the observed releases. The LWIR methane spectra showed clearer absorption structure than the MWIR spectra under the tested conditions. Retrieved LWIR methane concentration-pathlengths were 2568.38, 228.48 and 139.75 ppm·m for coke-oven, blast-furnace and converter gas, respectively, supporting the distinction of methane-rich coke-oven gas in this field comparison. The CO column amounts did not follow the nominal source-composition order, highlighting the limits of inferring source composition from path-integrated measurements. A radiative-transfer analysis identifies thermal contrast, atmospheric interference and channel noise as key constraints on band selection. The results support dual-band passive FTIR as a complementary tool for metallurgical leak characterization; validated alarm thresholds and reliable separation of all three gas types require additional measurements.
20 October 2026 in Results in Engineering