1 April 2019 in Acta Materialia
1 April 2019 in Acta Materialia
18 July 2025 in Science Advances
Coherent precipitation-hardened alloys often struggle to achieve both ultrahigh strength and exceptional ductility due to their limited resistance to dislocation motion and vulnerability to glide plane softening. Here, we tackle these challenges by introducing multicomponent precipitates with much increased antiphase boundary (APB) energy. In a model Ni 3 Al-type (L1 2 ) precipitation-hardened face-centered cubic (FCC) NiCo-based alloy, we incorporate multiple elements at the Al sublattice sites within the precipitates, reducing antisite defects and enhancing ordering degree. This process yields multicomponent precipitates with an ultrahigh APB energy (~308 ± 14 millijoules per square meter), which notably strengthens the alloy. Moreover, the exceptionally high APB energy transforms the deformation mechanism from dislocation shearing to stacking fault shearing, thereby avoiding glide plane softening. These result in a tensile yield strength of 1616 ± 9 megapascals, an ultimate tensile strength of 2155 ± 22 megapascals, and a uniform elongation of 10.1 ± 0.3% for the alloy.
1 July 2018 in Journal of Alloys and Compounds
13 December 2024 in Science Advances
High-entropy materials (HEMs) show inspiring structural and functional properties due to their multi-elemental compositions. However, most HEMs are burdened by cost-, energy-, and carbon-intensive extraction, synthesis, and manufacturing protocols. Recycling and reusing HEMs are challenging because their design relies on high fractions of expensive and limited-supply elements in massive solid solutions. Therefore, we review the basic sustainability aspects of HEMs. Solutions include using feedstock with lower carbon and energy footprints, sustainable primary synthesis routes from minerals, attenuation of the equimolar alloying rule, and a preference for scrap and dumped waste for secondary and tertiary synthesis. The high solubility, compositional flexibility, and chemical robustness of HEMs offer pathways for using higher fractions of mixed and contaminated scrap and waste feedstocks, which are not admissible for synthesizing conventional materials. We also discuss thermodynamic and kinetic design strategies to reconcile good material properties with high impurity tolerance and variable compositions.
18 September 2024 in Nature
Metallurgical production traditionally involves three steps: extracting metals from ores, mixing them into alloys by liquid processing and thermomechanical processing to achieve the desired microstructures1,2. This sequential approach, practised since the Bronze Age, reaches its limit today because of the urgent demand for a sustainable economy2–5: almost 10% of all greenhouse gas emissions are because of the use of fossil reductants and high-temperature metallurgical processing. Here we present a H2-based redox synthesis and compaction approach that reforms traditional alloy-making by merging metal extraction, alloying and thermomechanical processing into one single solid-state operation. We propose a thermodynamically informed guideline and a general kinetic conception to dissolve the classical boundaries between extractive and physical metallurgy, unlocking tremendous sustainable bulk alloy design opportunities. We exemplify this approach for the case of Fe–Ni invar bulk alloys6,7, one of the most appealing ferrous materials but the dirtiest to produce: invar shows uniquely low thermal expansion6,8,9, enabling key applications spanning from precision instruments to cryogenic components10–13. Yet, it is notoriously eco-unfriendly, with Ni causing more than 10 times higher CO2 emission than Fe per kilogram production2,14, qualifying this alloy class as a perfect demonstrator case. Our sustainable method turns oxides directly into green alloys in bulk forms, with application-worthy properties, all obtained at temperatures far below the bulk melting point, while maintaining a zero CO2 footprint.