Groundwater mostly contains many impurities thus can not be consumed as drinking water directly. The acceptable limit of fluoride in drinking water is 0.5–1.5 mg l−1 recommended by World Health Organization (WHO). In this research, a novel nanofiber hybrid; based on Chitosan (CTS) and Eggshell (EGG) was prepared via electrospinning technique and investigated for deflouridation from aqueous solution. SEM images reveal bead-free, smooth morphology and the FTIR confirmed the presence of chitosan and egg within the novel nanofiber blend. The defluoridation efficiency was assessed by varying the different parameters like pH, mass of nanofibers, contact time and initial concentration for adsorption. Studies revealed that CTS/EGG nanofibers hybrid shows incredible adsorption efficiency of 86%. Furthermore, isotherm studies show that the Langmuir isotherm model was well fitted for both CTS and CTS/EGG nanofibers.
15 November 2024 in Journal of Design and Textiles
This study aims to reduce the content of formaldehyde in pigment printed cotton fabric with deep shades. A hand screen printing method was applied using various curing temperatures and concentrations of urea for preparation of skin-friendly products. The woven, bleached fabrics were printed following a precise process of screen printing and these samples were dried and curried for proper fixation. Standard test procedures were followed to assess the content of H-CHO (formaldehyde) during washing and rubbing. H-CHO contents were instantly reduced by increasing the temperature of the printed fabric during curing. The best outcome for wet and dry fastness of rubbing was achieved at 160˚C, while a little enhanced rubbing outcomes were observed when the concentration of urea was 2% at a fixation temperature of 150˚C. The final product may be effectively used for clothing purpose, meeting the OEKO-TEX® Standard 100 standard for low formaldehyde content.