1 April 2011 in Journal of Materials in Civil Engineering
The fatigue-cracking life of an asphalt mixture measured in the laboratory is generally a small fraction of the fatigue-cracking life observed in the field. One of the reasons for this large difference is the self-healing property of asphalt binders. Self-healing is a process that reverses the growth of fatigue cracks during rest periods between load applications. A thorough understanding of the healing mechanism is required to accurately model and predict the influence of healing on the fatigue-cracking life of asphalt mixtures. Previous studies have used experimental evidence to demonstrate a correlation between chemistry of asphalt functional groups, such as chain length and branching, and healing measured in asphalt binders. One of the mechanisms of healing is the self-diffusion of molecules across the crack interface. This paper demonstrates the use of molecular simulation techniques to investigate the correlation of chain length and chain branching to self-diffusivity of binder molecules. The findin...
1 October 2012 in Journal of Materials in Civil Engineering
This paper semiquantitatively evaluates the microrheological properties of asphalt binder using atomic force microscopy. It also presents differences between these properties amongst the various microstructures within an asphalt binder, in addition to the influence of oxidative aging on these properties. Nano-indentation experiments performed within a microgrid of asphalt phases determined micromechanical properties such as stiffness, adhesion, and elastic/plastic behavior. The evaluated materials include asphalts AAB, AAD, and ABD from the Materials Reference Library of the Strategic Highway Research Program, chosen because of variations in crude source, chemical composition, and elemental analysis. Analysis of nano-indentation creep measurements corresponding to phase-separated regions revealed heterogeneous domains in asphalt with different mechanical properties, and oxidative aging induced substantial microstructural change within these domains, including variations in phase structure, propert...
4 February 2017 in International Journal of Pavement Engineering
Fatigue cracking is a common form of pavement failure and is strongly tied to the properties of the asphalt binder used in the mix. The Superpave grading procedure is currently used in the United States and in other parts of the world to classify and select asphalt binders for the design of asphalt mixtures. The parameter, , in the Superpave grading system is used to control the quality of the binder at intermediate temperatures. It is also used by many as a metric to measure the inherent fatigue cracking resistance of an asphalt binder. It is widely recognised that while this parameter was a significant improvement over previous binder grading and selection methods, it does not accurately measure the inherent fatigue damage resistance of asphalt binders. This paper provides a review of several studies that have attempted to develop methods to measure the fatigue damage resistance of asphalt binders during the last two decades. The studies reviewed in this paper have been classified into four main categories based on the type of test method employed. The four categories include: time sweep performed using the Dynamic Shear Rheometer (DSR), amplitude sweep using the DSR or its variations, ductility-based test methods and strength-based tests. This paper focuses primarily on tests developed in the United States with an emphasis to improve the existing Superpave criteria along with relevant research from other parts of the world.
7 August 2014 in International Journal of Pavement Engineering
In this study atomic force microscopy (AFM) creep indentations were performed to extract viscoelastic properties of the different domains (defined as microrheology) observed in bitumen samples from two different sources. The microrheology and geometry obtained using the AFM were used to perform finite element (FE) simulations to study the effect of bitumen microstructure on internal stress distribution. FE analyses suggest that microstructures with varying mechanical properties cause localised stress amplification that can lead to cracking/phase separation. A custom-made loading frame in conjunction with an AFM was used to examine the effects of tensile strain on bitumen microstructure. FE simulation and experimental results show that applying strain resulted in damage/phase separation concentrated in the interstitial zone between neighbouring bee structures, defined as load-induced phase separation. This study suggests that evaluating the bitumen microstructure and microrheology is critical to understanding the mechanisms of damage evolution in bitumen and engineering binders with higher inherent durability.
1 February 2009 in Journal of Materials in Civil Engineering
VBVeronica T. Castelo Branco
Veronica T. Castelo Branco
Different methods have been developed to assess fatigue cracking of asphalt mixtures based on dissipated energy. Most of these methods have been motivated by the need to develop a unified fatigue criterion that is independent of the mode of loading. This paper offers critical analyses of the energy methods based on their theoretical ability to: (1) unify the results from controlled-strain and controlled-stress modes of testing for the same material; and (2) accurately assess the fatigue cracking life of different materials. The efficacy of these methods is quantitatively compared using a common set of fatigue test data. The fatigue test data were obtained using the dynamic mechanical testing of three different mixtures that have been shown to exhibit different fatigue cracking resistance in the field.
9 February 2018 in International Journal of Pavement Engineering
Among the different attributes that can be used to describe the chemistry of any given bitumen, the distribution of its constituent molecules based on polarity is strongly related to the bitumen’s microstructure and engineering properties. Generally, bitumen is subdivided into asphaltenes and maltenes. The latter is further divided into three more fractions: saturates, aromatics and resins. This paper reviews the basic principles of liquid chromatography and presents a simplified technique for asphaltene–maltene separation and two new methods for maltene fractionation. The two methods for maltene fractionation are based on chromatographic principles. The first method applies the thin-layer chromatographic technique combined with optical fluorescent densitometry for separation and quantification. The second method utilises solid-phase extraction (SPE) cartridges, which are commercially available in pre-packed standard units and allow rapid and repeatable testing when used as a mini liquid chromatography column. Both methods are scalable to quantify more than three maltene fractions. The proposed methods were semi-quantitatively validated using 10 binders with known polar fractions. The simplicity, the minimal requirement of capital equipment and the monitoring time makes the proposed method an attractive option for use as a routine test to create a sizable database of bitumen fingerprints based on their polarity.