Nazmus Sakib

Dr. Nazmus Sakib

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2018 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
NSNazmus Sakib
Nazmus Sakib
ABAmit Bhasin
Amit Bhasin
Among the different attributes that can be used to describe the chemistry of any given bitumen, the distribution of its constituent molecules based on polarity is strongly related to the bitumen’s microstructure and engineering properties. Generally, bitumen is subdivided into asphaltenes and maltenes. The latter is further divided into three more fractions: saturates, aromatics and resins. This paper reviews the basic principles of liquid chromatography and presents a simplified technique for asphaltene–maltene separation and two new methods for maltene fractionation. The two methods for maltene fractionation are based on chromatographic principles. The first method applies the thin-layer chromatographic technique combined with optical fluorescent densitometry for separation and quantification. The second method utilises solid-phase extraction (SPE) cartridges, which are commercially available in pre-packed standard units and allow rapid and repeatable testing when used as a mini liquid chromatography column. Both methods are scalable to quantify more than three maltene fractions. The proposed methods were semi-quantitatively validated using 10 binders with known polar fractions. The simplicity, the minimal requirement of capital equipment and the monitoring time makes the proposed method an attractive option for use as a routine test to create a sizable database of bitumen fingerprints based on their polarity.

23 November 2015 in Journal of Microscopy
Verified
Journal Article
Open access
PDF file
ARA. Ramm
A. Ramm
NSNazmus Sakib
Nazmus Sakib
ABA. Bhasin
A. Bhasin
MDM.C. Downer
M.C. Downer
Summary: We introduce noncontact optical microscopy and optical scattering to characterize asphalt binder microstructure at temperatures ranging from 15°C to 85°C for two compositionally different asphalt binders. We benchmark optical measurements against rheometric measurements of the magnitude of the temperature‐dependent bulk complex shear modulus . The main findings are: (1) Elongated (∼5 × 1 μm), striped microstructures (known from AFM studies as ‘bees’ because they resemble bumble‐bees) are resolved optically, found to reside primarily at the surface and do not reappear immediately after a single heating–cooling cycle. (2) Smaller (∼1 μm2) microstructures with no observable internal structure (hereafter dubbed ‘ants’), are found to reside primarily in the bulk, to persist after multiple thermal cycles and to scatter light strongly. Optical scattering from ‘ants’ decreases to zero with heating from 15°C to 65°C, but recovers completely upon cooling back to 15°C, albeit with distinct hysteresis. (3) Rheometric measurements of reveal hysteresis that closely resembles that observed by optical scatter, suggesting that thermally driven changes in microstructure volume fraction cause corresponding changes in .

10 May 2019 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
NSNazmus Sakib
Nazmus Sakib
ABAmit Bhasin
Amit Bhasin
KIKamrul Islam
Kamrul Islam
KKKAFFAYATULLAH KHAN
KAFFAYATULLAH KHAN
MKMuhammad Imran Khan
Muhammad Imran Khan
Several materials (e.g. bio-binders and industrial waste products) have been developed and proposed as a sustainable extender or replacement for asphalt binder over the years. Sulphur is a promising and sustainable binder extender that can be scaled to meet the high volume demand of this industry. Several laboratory and field studies were undertaken during the 1970s to use sulphur as a binder replacement or extender. However, by 1980s, economic factors eliminated the impetus to develop sulphur based binder technologies. However, current economic and environmental conditions combined with technological advances once again make it feasible to use sulphur as a binder extender, particularly in certain parts of the world. This paper presents a summary of the chemical characteristics of sulphur that make it possible to use it as an extender for asphalt binders, the evolution of different technologies in the 1970s and then again during the last decade to utilize sulphur as a pavement construction material. The paper also summarizes findings from a few research studies focused on the use of sulphur as an extender and concludes with some areas of research that are required to revive this technology and avail its benefits in pavement construction and maintenance.

7 November 2019 in Journal of Microscopy
Verified
Journal Article
Open access
PDF file
ARA. Ramm
A. Ramm
MDM.C. Downer
M.C. Downer
NSNazmus Sakib
Nazmus Sakib
ABA. Bhasin
A. Bhasin
Summary: We combined optical and atomic force microscopy to observe morphology and kinetics of microstructures (typically referred to as bees) that formed at free surfaces of unmodified Performance Graded (PG) 64‐22 asphalt binders upon cooling from 150°C to room temperature (RT) at 5°C min–1, and changes in these microstructures when the surface was terminated with a transparent solid (glass) or liquid (glycerol) overlayer. The main findings are: (1) at free binder surfaces, wrinkled microstructures started to form near the crystallization temperature (∼45°C) of saturates such as wax observed by differential scanning calorimetry, then grew to ∼5 µm diameter, ∼25 nm wrinkle amplitude and 10–30% surface area coverage upon cooling to RT, where they persisted indefinitely without observable change in shape or density. (2) Glycerol coverage of the binder surface during cooling reduced wrinkled area and wrinkle amplitude three‐fold compared to free binder surfaces upon initial cooling to RT; continued glycerol coverage at RT eliminated most surface microstructures within ∼4 h. (3) No surface microstructures were observed to form at binder surfaces covered with glass. (4) Submicron bulk microstructures were observed by near‐infrared microscopy beneath the surfaces of all binder samples, with size, shape and density independent of surface coverage. No tendency of such structures to float to the top or sink to the bottom of mm‐thick samples was observed. (5) We attribute the dependence of surface wrinkling on surface coverage to variation in interface tension, based on a thin‐film continuum mechanics model.Lay Description: Asphalt binder, or bitumen, is the glue that holds aggregate particles together to form a road surface. It is derived from the heavy residue that remains after distilling gasoline, diesel and other lighter products out of crude oil. Nevertheless, bitumen varies widely in composition and mechanical properties. To avoid expensive road failures, bitumen must be processed after distillation so that its mechanical properties satisfy diverse climate and load requirements. International standards now guide these mechanical properties, but yield varying long‐term performance as local source composition and preparation methods vary. In situ diagnostic methods that can predict bitumen performance independently of processing history are therefore needed. The present work focuses on one promising diagnostic candidate: microscopic observation of internal bitumen structure. Past bitumen microscopy has revealed microstructures of widely varying composition, size, shape and density. A challenge is distinguishing bulk microstructures, which directly influence a binder's mechanical properties, from surface microstructures, which often dominate optical microscopy because of bitumen's opacity and scanning‐probe microscopy because of its inherent surface specificity. In previously published work, we used infrared microscopy to enhance visibility of bulk microstructure. Here, as a foil to this work, we use visible‐wavelength microscopy together with atomic‐force microscopy (AFM) specifically to isolate surface microstructure, to understand its distinct origin and morphology, and to demonstrate its unique sensitivity to surface alterations. To this end, optical microscopy complements AFM by enabling us to observe surface microstructures form at temperatures (50°C–70°C) at which bitumen's fluidity prevents AFM, and to observe surface microstructure beneath transparent, but chemically inert, liquid (glycerol) and solid (glass) overlayers, which alter surface tension compared to free surfaces. From this study, we learned, first, that, as bitumen cools, distinctly wrinkled surface microstructures form at the same temperature at which independent calorimetric studies showed crystallization in bitumen, causing it to release latent heat of crystallization. This shows that surface microstructures are likely precipitates of the crystallizable component(s). Second, a glycerol overlayer on the cooling bitumen results in smaller, less wrinkled, sparser microstructures, whereas a glass overlayer suppresses them altogether. In contrast, underlying smaller bulk microstructures are unaffected. This shows that surface tension is the driving force behind formation and wrinkling of surface precipitates. Taken together, the work advances our ability to diagnose bitumen samples noninvasively by clearly distinguishing surface from bulk microstructure.

1 January 2014 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
AMArash Motamed
Arash Motamed
DSDelmar Salomon
Delmar Salomon
NSNazmus Sakib
Nazmus Sakib
ABAmit Bhasin
Amit Bhasin
A new procedure has been developed for residue recovery of emulsified asphalt. The procedure uses a moisture analyzer balance (MAB). The MAB recovery method is quick and simple compared with traditional recovery procedures such as distillation or oven evaporation. Although the MAB procedure has become an ASTM procedure, there have been a limited number of studies on the rheological properties of the emulsion residues recovered by MAB. This research used a dynamic shear rheometer (DSR) to investigate the rheological properties of MAB specimens. The MAB method was used for several types of emulsions, including cationic and anionic emulsions with several modifications. The MAB method developed in this study addresses the issue of breakdown of polymers during recovery of modified emulsions at high temperatures. The study evaluated the effect of recovery temperature on the recovery time and rheological properties of emulsion residues and proposed a new recovery-characterization procedure. The results show that a preliminary performance grade classification of the emulsified asphalt can be made with the combined MAB-DSR procedure. Furthermore, the study quantified the effect of aging that might occur during the recovery and emulsification process on the rheological properties of the emulsion residues. The combined MAB-DSR procedure is proposed to be a cost-effective alternative method to evaluate the performance of emulsified asphalts.

1 June 2020 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
NSNazmus Sakib
Nazmus Sakib
Ramez HajjRamez Hajj
Ramez Hajj
RHRachel Hure
Rachel Hure
AAAyah Alomari
Ayah Alomari
ABAmit Bhasin
Amit Bhasin
The chemical composition of a bitumen dictates its rheological properties as well as its performance in an asphalt mixture. Any bitumen comprises a wide variety of complex hydrocarbons, and its chemical composition can be characterized by many different parameters. Similarly, the mechanical properties of any given bitumen are typically characterized based on its time-temperature dependent rheological properties at different stress levels. This study characterizes the chemical makeup of a set of bitumens from several different producers based on their polarity and compares these characteristics to mechanical properties associated with the Superpave performance grading (PG) of bitumen and its tensile strength. To do this, a novel fractionation technique was used to separate the bitumens into chemical fractions, while performance testing was performed on the original bitumens. The results were compared using a statistical analysis software to examine relationships between the chemical fractions and physical properties. The results show that high temperature stiffness is strongly dictated by the asphaltene content and that the low temperature stiffness is strongly dictated by the aromatic and resin content. The useful temperature interval showed a good correlation with asphaltenes and resins. Finally, the tensile strength of the bitumens also showed a strong correlation with SARA parameters. Bitumens that deviated from some of these correlations also showed an uncharacteristic response in some other mechanical or elemental property measurements. The relationship between time-dependent characteristics and polar fractions was not strong and requires further understanding.