Dinara Syzdykbaeva

Dinara Syzdykbaeva

Auto-generated profile, based on publicly available information

Dinara Syzdykbaeva

NJSC «Abylkas Saginov Karaganda Technical University

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2024 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
VDVladimir Demin
Vladimir Demin
EKElvira Khalikova
Elvira Khalikova
MRM. Rabatuly
M. Rabatuly
ZAZhursyn Amanzholov
Zhursyn Amanzholov
AZAila Zhumabekova
Aila Zhumabekova
YYYerbol Yelzhanov
Yerbol Yelzhanov
Purpose. The research aims to substantiate the technological solutions to ensure the rock mass stability through a rational approach to strengthening the zones of increased rock pressure behind the longwall face. Methods. To achieve the purpose set, a complex research method is used, which includes an analysis of practical experience in mining medium-thickness flat-lying coal seams, a study of the stress-strain state of rocks above the coal mass marginal area, and mine research into the influence of mining-technical factors on the state of zonal preparatory workings. Findings. The patterns of stress influence on the mine working stability have been determined depending on the mining-technological parameters of mining operations. Empirical dependences of the stress influence on the mine working stability have been revealed. The parameters of stress influence on the mine working stability have been found depending on the mining-technological parameters of mining operations. Originality. The conducted research made it possible to determine the degree of influence of mining-technical conditions of mining operations on deformations in border rocks with various types of support in extraction workings, which helps to understand the dynamics of deformation processes occurring in the coal-rock mass surrounding mine workings maintained behind the longwall face. Practical implications. The revealed deformation patterns can be used in calculating the rock pressure manifestations when conducting mine workings on deep levels under various mining-technical conditions of mining operations, which has practical significance for ensuring the stability and safety of maintaining mine workings at the stage of mining operations. The use of roof-bolt support is proposed as an effective means not only to ensure stability, but also to maintain safe operating conditions in mine workings.

30 June 2026 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
EKElvira Khalikova
Elvira Khalikova
AZAila Zhumabekova
Aila Zhumabekova
AVA V
A V
DSDinara Syzdykbaeva
Dinara Syzdykbaeva
GSGulmira Sattarova
Gulmira Sattarova
KAKaratayev Aibolat
Karatayev Aibolat
Purpose. To investigate the stress-strain state of the coal-rock mass surrounding a gob-side development roadway and to justify its support parameters under the mining conditions of the Karaganda Coal Basin. Methods. The study was based on geomechanical modeling of the coal-rock mass surrounding a roadway driven adjacent to the goaf of a previously extracted longwall panel and separated from it by a limited-width coal pillar. The simulations were performed in ANSYS using the finite element method in 2D. The computational model incorporated the goaf, protective coal pillar, stratified structure of the surrounding rocks, mining depth, physical and mechanical rock properties, loading conditions, and roadway support parameters. The stress-strain state and strength factor were additionally assessed in Rocscience RS2 for a ventilation roadway driven along the boundary of the goaf. Findings. The width and strength of the coal pillar were found to affect stress redistribution around the gob-side roadway significantly. A limited-width pillar shifted the peak maximum stress 5-10 m deeper into the intact coal mass and reduced its magnitude by approximately 1.6 times compared with the pillarless configuration. Stresses directly above the roadway decreased by a factor of 1.2-1.3. Increasing the pillar strength or its width to 20 m reduced the maximum stresses in the rock mass by almost twofold. The RS2 simulations showed that increasing the mining depth from 450 to 700 m increased the maximum principal stresses by a factor of 1.7-1.9 and the roadway contour displacements by a factor of 1.2-1.35. Originality. Relationships governing stress redistribution and the formation of reduced-stability zones around gob-side development roadways were established as functions of coal pillar parameters, mining depth, and roadway support conditions. Practical implications. The results provide a geomechanical basis for selecting support schemes for gob-side roadways located within zones of elevated rock pressure.

30 June 2025 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
VDVladimir Demin
Vladimir Demin
EKElvira Khalikova
Elvira Khalikova
AVA V
A V
DSDinara Syzdykbaeva
Dinara Syzdykbaeva
AKAibolat Karatayev
Aibolat Karatayev
MMMurat Gazizovich Mustafin
Murat Gazizovich Mustafin
Purpose. The research is aimed at developing scientifically sound principles of the technology for maintaining mine workings to ensure their stability during mining of coal seams in the Karaganda coal basin (Republic of Kazakhstan). The influence of fastening parameters on strengthening effect under conditions of controlled stress-strain state of the “host rocks – fastening elements” system is studied. Methods. The study includes an analysis of scientific-practical experience in operating mine workings and conditions for conducting underground operations. The stress-strain state of the mass is assessed by the finite element method in two-dimensional formulation using the RS2 software package. The inelastic deformation zones are calculated taking into account the geological-technological factors influencing the behavior of the mass in the area of the cutting zonal extraction workings. Findings. For the first time, the patterns of change in the sizes of plastic deformation zones and stressed areas around mine workings with different technological fastening solutions have been quantified. The dependence of the stress-strain state on the characteristics and geometry of the fastening system has been revealed. Originality. The patterns of changes in the size of deformation and stress zones in the vicinity of mine workings at different techno-logical fastening schemes have been determined. The dependence of the stress-strain state of the mass on the parameters of the fastening systems has been revealed. Practical implications. Scientifically sound recommendations have been developed for the technology of fastening cutting ventilation mine workings using two-level roof-bolting systems in the case of stable roof layers. The optimum parameters for fastening operational mine workings that provide stability at different depths of seam occurrence have been substantiated.

29 December 2023 in Горный журнал Казахстана
Verified
Journal Article
Closed access
VDVladimir Demin
Vladimir Demin
DADenis Akhmatnurov
Denis Akhmatnurov
NZNail Zamaliyev
Nail Zamaliyev
DSD.S. Syzdykbaeva
D.S. Syzdykbaeva
This scientific work is devoted to the study of geomechanical effects during the construction, maintenance and repair of mine workings in coal mines of the Karaganda basin. The study established that the manifestation of deformations in workings when using a combined anchor-frame support is 4-5 times less than when using metal frame support, and the limited-yield anchor support acts as a stress compensator. The revealed patterns of changes in the stress-strain state of coal in the host rock masses depending on mining and geological factors, which will allow, under specific operating conditions, to establish rational parameters for securing side rocks to increase the stability of development mine workings Бұл мақала Қарағанды бассейнінің көмір шахталарындағы кен қазбаларын салу, пайдалану және жөндеу кезіндегі геомеханикалық әсерлерді зерттеуге арналған. Шахталық қазбалардың қалыптан тыс жерлерінде анкерлік бекіткішін пайдалануы ұсынылды. Біріктірілген анкерлік-қаңқалық тіреуді пайдаланған кезде жұмыс орындарындағы деформациялардың көрінісі металл қаңқалы тіректерді пайдаланған кездегіден 4-5 есе аз болатыны анықталды, ал шектеулі шығымды якорь тірегі кернеуді компенсатор ретінде әрекет етеді. Тау-кендік және геологиялық факторларға байланысты негізгі тау-кен массаларында көмірдің кернеулі-деформациялық күйінің өзгеруінің анықталған заңдылықтары нақты пайдалану шарттарында кен қазбаларын игерудің тұрақтылығын арттыру үшін бүйірлік жыныстарды бекітудің ұтымды параметрлерін белгілеуге мүмкіндік береді Данная научная работа посвящена исследованию геомеханических воздействий при проведении, поддержании и ремонте горных выработок на угольных шахтах Карагандинского бассейна. В ходе исследования установлено, что проявление деформаций выработок при использовании комбинированной анкерно-рамной крепи меньше в 4-5 раз, чем при применении металлорамной крепи, а ограниченно-податливая анкерная крепь выполняет роль компенсатора напряжений. Выявленны закономерности изменения напряженно-деформированного состояния угля вмещающих породных массивов в зависимости от горно-геологических факторов, что позволит в конкретных условиях эксплуатации устанавливать рациональные параметры крепления боковых пород для повышения устойчивости подготовительных горных выработок

4 March 2025 in Горный журнал Казахстана
Verified
Journal Article
Open access
ЭХЭ.р. Халикова
Э.р. Халикова
АЖА.е. Жұмабекова
А.е. Жұмабекова
ДСД.с. Сыздыкбаева
Д.с. Сыздыкбаева
MMMurat Gazizovich Mustafin
Murat Gazizovich Mustafin
Мақалада дайындық өндірісінің геологиялық бұзылуынан өту кезінде тау жыныстарының әлсіреген аймағын нығайтудың технологиялық схемасы қарастырылған. Мұндай схемаларға қажеттілік тау-кен қазбалары жүргізілетін күрделі тау-кен-геологиялық жағдайларға байланысты үнемі туындайды, онда үстіңгі қазба аймақтары, тірек (тазалау жұмыстары фронтының алдында) және жоғары тау-кен қысымдары (жоғарыда тұрған бұрын істен шыққан қаттарда қалған кентіректерден) болған кезде, жанасқан қазбалардың әсері, тазарту кенжарлы желісімен қайта пайдалану үшін сақталуы қажет. Сандық есептеулердің көмегімен әртүрлі жағдайларда анкерлік бекітпенің көлбеу бұрышын анықтау бойынша геомеханикалық зерттеулер жүргізілді In this article, a technological scheme for strengthening a weakened zone of rocks at the intersection of a geological disturbance by preparatory mining is considered. The need for such schemes constantly arises due to the difficult mining and geological conditions in which mining operations are carried out in the presence of over- and under-working zones, support (ahead of the front of cleaning operations) and increased mining (from the pillars left on the overlying previously spent formations) pressures, the influence of converging workings, preservation for reuse for the cleaning face line. With the help of numerical calculations, the parameters of the advanced fastening were determined, geomechanical studies were carried out to determine the angle of inclination of the anchor support under various conditions В данной статье рассмотрена технологическая схема по упрочнению ослабленной зоны горных пород при пересечении геологического нарушения подготовительной выработкой. Необходимость в таких схемах постоянно возникает из-за сложных горно-геологических условий, в которых проводятся горные выработки при наличии зон над- и подработки, опорного (впереди фронта очистных работ) и повышенного горного (от целиков, оставленных на вышележащих ранее отработанных пластах) давлений, влияние сближенных выработок, сохранение для повторного использования за линией очистного забоя. С помощью численных расчетов определены параметры заложения опережающего крепления, проведены геомеханические исследования по определению угла наклона анкерной крепи при различных условиях

31 January 2025 in Горный журнал Казахстана
Verified
Journal Article
Closed access
AZA.YE. Zhumabekova
A.YE. Zhumabekova
EKE.R. Khalikova
E.R. Khalikova
DMD.D. Meiram
D.D. Meiram
DSD.S. Syzdykbayeva
D.S. Syzdykbayeva
The experience of coal and mining enterprises, the development of underground mines shows that it is an important task of industrial activity to ensure the reduction of defects in mine contours. With the «supportless» technology and the frame structure of excavations, there are intractable problems of safety and complexity of work in the areas of long preparation works, including high-performance, where they come into contact with cleaning surfaces. In this case, the initial section of the grooves adjacent to the cleaning surfaces is usually 14-16 m2, and the second section – 9-10 m2. This not only makes predictions of gas-dynamic phenomena, ventilation systems and layer accumulation of methane in difficult ventilated working areas but also complicates the placement of modern large-sized equipment with high unit power, its transportation to a new location, worsens the situation. Exchange of jobs of people and organization of their delivery, transportation of materials create a constant high-risk situation Көмір және тау-кен өндіру кәсіпорындарын, жер асты қазбаларын игеру тәжірибесі кен қазбаларының контурларының ақаулығын азайтуды қамтамасыз ету өндірістік қызметтің маңызды міндеті болып табылатынын көрсетеді. «Тірексіз» технологиямен және қазбалардың рамалық құрылымымен дайындық жұмыстарының ұзын, оның ішінде жоғары өнімді, тазалау беттерімен түйісетін аймақтарында шешілмейтін қауіпсіздік және жұмыстың күрделілігі мәселелері туындайды. Бұл жағдайда тазарту беттеріне іргелес жатқан ойықтардың бастапқы қимасы, әдетте, 14-16 м2, ал екінші секция – 9-10 м2 аспайды. Бұл қиын желдетілетін жұмыс аймақтарында газ-динамикалық құбылыстардың, желдету жүйелерінің және метанның қабат жинақталуының болжамдарын жасап қана қоймайды, сонымен қатар бірлік қуаты жоғары заманауи үлкен өлшемді жабдықты орналастыруды, оны жаңа жерге тасымалдауды қиындатады, жағдайды нашарлатады. Адамдардың жұмыс орнын айырбастау және оларды жеткізуді ұйымдастыру, материалдарды тасымалдау – бұл тұрақты жоғары қауіптілік жағ- дайын туындайды Опыт разработки угольных и горнорудных добывающих предприятий, полезных ископаемых, отрабатываемых подземным способом, показывает, что обеспечение снижения дефектности контуров горных выработок является важной горно-технической задачей производственной деятельности. При бесцеликовой технологии и рамном сооружении выработок возникают неразрешимые проблемы безопасности и трудоемкости работ в зонах сопряжения подготовительных выработок с длинными, в том числе высокопроизводительными, очистными забоями. При этом первичное сечение выработок, примыкающих к очистным забоям, как правило, не превышает 14-16 м2, а вторичное сечение – 9-10 м2. Возникает проблема не только газодинамических явлений, систем проветривания и слоевых скоплений метана в труднопроветриваемых зонах выработок, появляются затруднения в размещении современного крупногабаритного оборудования большой единичной мощности, его передислокации, ухудшаются условия для перемещения людей и организации их доставки, транспортировки материалов, что создает ситуацию постоянной повышенной опасности