This investigation studies the partitioning of Mn and Cu – and Si– between ferrite and cementite in the pearlite of two alloys containing similar Mn and Si concentrations, but different Cu contents, keeping the Cu concentration within the usual industrial limits. The results confirm the partitioning of all the elements between ferrite and cementite during pearlite growth. Furthermore, the presence of nanometric Cu-rich precipitates was detected for an alloy with typical Cu contents for achieving pearlitic structures in spheroidal graphite cast irons. This might be linked to the microsegregation of Cu developed during the solidification step. These precipitates have not been reported before and cannot be ignored as they can affect the transformation kinetics and the mechanical properties of the alloy.
Tempered AISI 4140 steel bars were processed by cold drawing. An effective deformation of ≈0.9 was achieved. The quench and tempered, and the subsequently deformed microstructures were analysed by optical and transmission electron microscopy. Intralath, interlath and spherically shaped carbides were identified in both cases. The deformed specimens revealed a mixed structure of thinned laths and dislocations cell-blocks composed of cell-block and cell boundaries. After the deformation process, alignment and fragmentation of the carbides occurred, mainly of those located in lath boundaries what would explain the partial preservation of the lath boundaries after drawing as they would arrest the destruction of lath martensite boundaries. These microstructural characteristics shall play an important role to enhance grain refinement in subsequent heat treatments.
29 November 2020 in International Journal of Metalcasting