1 September 2008 in Materials Characterization
1 March 1995 in Cast Metals
The effectiveness of several metallographic techniques used to reveal the solidification structure of nodular iron has been evaluated by quantitative metallography. A colour metallography reagent, sensitive to microsegregation, provides the best results, and the correlation between the colouring and the microsegregation of some elements has been verified by microanalysis. The structure of the matrix before etching affects the results, with single-phase matrices providing better information than multiple-phase matrices. In particular, ferritic matrices give more detailed and reproducible results.
1 March 2001 in International Journal of Cast Metals Research
Methods to reveal the macrostructure of spheroidal graphite cast iron (SGI) are not available. This has caused a number of controversies involving the solidification mechanism of this metallic alloy. The objective of the present work is to examine the use of a novel technique (DAAS) reported recently, to reveal the solidification macrostructure of SGI made using conventional melting and pouring practices, and cast in sand moulds. The results show that the DAAS technique successfully reveals the macrostructure. The basic features of the solidification macrostructure of SGI are similar to those of most metallic alloys. Nevertheless, some particular features have become evident. The grain size of SGI is considerably larger than previously estimated. The grain size of hypereutectic SGI is consistently smaller than that of hypo and eutectic irons cast in similar conditions. The observation of the actual solidification macrostructure of SGI led the authors to propose a description of the solidification mechanism that takes into account the actual size and morphology of the solidification units. The new DAAS technique is a very valuable tool which can be used to investigate a number of issues about SGI solidification still under discussion.
1 March 1997 in International Journal of Cast Metals Research
The present research focuses on the study of the precipitation of free ferrite in ductile iron during cooling through the intercritical temperature range. The main objectives are to recognize the morphology of the free ferrite precipitated in pearlitic ductile iron alloyed with Cu and Mn, and to evaluate the mechanical properties resulting from different microstructures. The microstructures investigated were generated by normalising heat treatments from regular and low austenitising temperatures. The results indicate that different free ferrite morphologies are produced depending on the thermal cycles carried out. As-cast samples present bull's eye morphology, while austenite grain boundary precipitation dominates in recrystallised structures. Low austenitising temperature normalising causes, in the alloys studied, the formation of a fine network of free ferrite precipitated within the pearlitic matrix at the recrystallised austenite grain boundaries. Low austenitising temperature normalising markedly improved the mechanical properties of ductile iron, surpassing the elongation of conventional normalising, and retaining similar levels of hardness and strength. This treatment has been found useful to counterbalance low ductility induced by intercellular carbide precipitation.
2 March 2020 in Materials Science and Technology
A high silicon cast steel was studied in the as-cast condition in order to characterise its solidification macrostructure and microsegregation. The steel, poured into 32 mm-keel-block-shaped moulds, has a coarse solidification structure and marked microsegregation, containing low-alloyed areas with a total alloy content (Cr + Mn + Si) of 2.3 wt-% and high-alloyed zones of 5.3 wt-%. The bainitic transformation behaviour at 300°C was studied at different austempering times. The bainitic reaction occurs at different rates within the specimen volume, because of its chemical heterogeneity. An austempering heat treatment leads to an inhomogeneous carbide-free bainitic microstructure with different phase amounts, morphologies and sizes. The heterogeneous distribution of sizes and chemical compositions of retained austenite is speculated to benefit mechanical properties.
17 March 2020 in Fatigue & Fracture of Engineering Materials & Structures