In this work, we present a 3D-printed waveguide that provides effective electromagnetic guidance in the THz regime. The waveguide is printed using low-cost polycarbonate and a conventional fused deposition modeling printer. Light guidance in the hollow core is achieved through antiresonance, and it improves the energy effectively transported to the receiver compared to free space propagation. Our demonstration adds to the field of 3D-printed terahertz components, providing a low-cost way of guiding terahertz radiation.
We report the use of a terahertz (THz) transparent material, cyclic olefin copolymer (COC or TOPAS), for fabricating a hollow-core antiresonant fiber that provides an electromagnetic wave guidance in the THz regime. A novel fabrication technique to realize a hollow-core antiresonant polymer optical fiber (HC-ARPF) for THz guidance is proposed and demonstrated. The fiber is directly extruded in a single-step procedure using a conventional fused deposition modeling 3D printer. The fiber geometry is defined by a structured nozzle manufactured with a metal 3D printer, which allows tailoring of the nozzle design to the various geometries of microstructured optical fibers. The possibility to use the HC-ARPF made from TOPAS for guiding in the THz region is theoretically and experimentally assessed through the profile of mode simulation and time-frequency diagram (spectrogram) analysis.
Terahertz time-domain spectroscopy (THz-TDS) is a proven technique whereby the complex refractive indices of materials can be obtained without requiring the use of the Kramers-Kronig relations, as phase and amplitude information can be extracted from the measurement. However, manual pre-processing of the data is still required and the material parameters require iterative fitting, resulting in complexity, loss of accuracy and inconsistencies between measurements. Alternatively approximations can be used to enable analytical extraction but with a considerable sacrifice of accuracy. We investigate the use of machine learning techniques for interpreting spectroscopic THz-TDS data by training with large data sets of simulated light-matter interactions, resulting in a computationally efficient artificial neural network for material parameter extraction. The trained model improves on the accuracy of analytical methods that need approximations while being easier to implement and faster to run than iterative root-finding methods. We envisage neural networks can alleviate many of the common hurdles involved in analyzing THz-TDS data such as phase unwrapping, time domain windowing, slow computation times, and extraction accuracy at the low frequency range.
Terahertz (THz) technology has witnessed a significant growth in a wide range of applications, including spectroscopy, bio-medical sensing, astronomical and space detection, THz tomography, and non-invasive imaging. Current THz microstructured fibers show a complex fabrication process and their flexibility is severely restricted by the relatively large cross-sections, which turn them into rigid rods. In this paper, we demonstrate a simple and novel method to fabricate low-cost THz microstructured fibers. A cyclic olefin copolymer (TOPAS) suspended-core fiber guiding in the THz is extruded from a structured 3D printer nozzle and directly drawn in a single step process. Spectrograms of broadband THz pulses propagated through different lengths of fiber clearly indicate guidance in the fiber core. Cladding mode stripping allow for the identification of the single mode in the spectrograms and the determination of the average propagation loss (~ 0.11 dB/mm) in the 0.5–1 THz frequency range. This work points towards single step manufacturing of microstructured fibers using a wide variety of materials and geometries using a 3D printer platform.