In the article the possible using of low methylated amidated pectin for hydrogel bioinks preparation was investigated. The used pectins were obtained from different fruits and were characterized by their varying molecular weight characteristics, monosaccharide composition, and degree of esterification, degree of amidation and type of sugar additive (sucrose or glucose). The focus was on analysing the influence of the polymer structure and added sugar type on the 3D printability and thermal properties of the developed formulations. The studies had shown that the influence of the type and amount of sugar seems to be more crucial. It was observed that in the presence of sucrose, pectin crosslinking occurs not only through ionic and hydrogen interactions sugar-pectin-metal ion, but also through chemical crosslinking occurring as a result of the Millard reaction between amidated pectin and fructose formed as a result of sucrose hydrolysis. This phenomenon is not observed in the presence of glucose in the system, where the polymer forms reversible gels. The printability tests indicates that in order to obtain inks based on amidated pectin with a low degree of esterification, it is beneficial to use biopolymer standardized with glucose and optimize its amount in the system.
This work aims to elucidate the influence of filler particle size on the rheological behaviour, as well as the micro- and macromechanical properties, of polymer-ceramic composites. For this investigation, two widely utilised biodegradable polymers, polylactide (PLA) and polycaprolactone (PCL), were selected as the polymer matrices. Hydroxyapatite (HAp) powders with average particle sizes of 10 μm and 60 nm were used as fillers. A series of composites were prepared using twin-screw extrusion and injection moulding techniques, with micro- and nanoparticle HAp concentrations of 20 wt% and 40 wt% for PLA and 20 wt% for PCL. The produced materials were subjected to comprehensive analysis, including morphological evaluation (scanning electron microscopy), thermal characterisation (differential scanning calorimetry, thermogravimetric analysis), rheological testing and mechanical property assessment at both micro (micro indentation) and macro (tensile, impact strength) scales. Our research had three main objectives: to carry out a comparative analysis of composites with different polymer matrices, to evaluate the effect of the filler on the properties of the given polymer matrix and, finally, to investigate the effect of the filler particle size on the overall performance of the composites. In general, PLA-based materials exhibited brittleness and strong polymer-filler interactions, whereas PCL-based materials were ductile and showed weak polymer-filler interactions. The use of nanometric filler resulted in more desirable mechanical properties and improved polymer melt stability compared to composites containing micrometric filler. This research makes a significant contribution to the design and production of composite materials for biomedical applications.
16 October 2026 in Journal of Thermal Analysis and Calorimetry
This study investigates the incorporation of powdered Baltic amber (AbW) as a filler in poly(lactic acid) (PLA) via melt mixing under a temperature processing window defined above the glass transition of amber and below its degradation onset. The extruded composites were pelletized, showing homogeneous dispersion and a brownish hue that increased with amber content. The composites were characterized in terms of melt flow rate (MFR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results provided a basis for defining subsequent processing parameters via cast film extrusion and injection molding at temperatures up to 200 °C. The resulting samples were further characterized to assess color change, thermal behavior, molecular weight (GPC), rheological response, and morphology (SEM). No significant differences were observed in the properties of injection molded and extruded film composites. Changes in color and transparency were primarily driven by amber content and sample thickness. Amber incorporation did not interfere with PLA thermal behavior or stability. Incorporation of amber into PLA reduced the melt viscosity, with only minor variations on the molecular weight, suggesting an effect associated with low molecular weight components (LMW) present in amber. These findings expand the current understanding of amber–polymer interactions and highlight the role of amber in modulating the processability of biopolymers systems.