In recent years, wearable sensors and energy harvesters have shown great potential for a wide range of applications in personalized healthcare, robotics, and human–machine interfaces. Among different types of materials used in wearable electronics, piezoelectric materials have gained enormous attention due to their exclusive ability to harvest energy from ambient sources. Piezoelectric materials can be utilized as sensing elements in wearable sensors while harvesting biomechanical energy. Electrospun piezoelectric polymer nanofibers are extensively investigated due to their high flexibility, ease of processing, biocompatibility, and higher piezoelectric property (in contrast to their corresponding cast films). However, as compared to piezoceramic materials, they mostly exhibit relatively lower piezoelectric coefficients. Therefore, considerable efforts have been devoted to improving the piezoelectricity of electrospun polymer nanofibers recently, resulting in significant advances. This review presents a broad overview of these advances including new material, structure designs as well as new strategies to enhance piezoelectricity of electrospun polymer nanofibers. The challenges in achieving high mechanical performance as well as high piezoelectricity are particularly discussed. The main motivation of this review is to examine these challenges and highlight effective approaches to achieving high‐performance piezoelectric sensors and energy harvesters for wearable technologies.
17 February 2020 in Macromolecular Materials and Engineering
Ambient solution-processed halide perovskite thin films are susceptible to oxygen and moisture. Composition and morphology control of the films via anti-solvents treatment, i.e. , DCB, EtOH, and CB affect their crystallization and solar cell performance.
Metal halide perovskite indoor photovoltaics (IPVs) are the top contenders in terms of efficiency among emerging IPV technologies. The state‐of‐the‐art perovskite IPVs have already achieved reported efficiencies above 44%, indicating their significant potential. However, only a small percentage of reports discuss stability measurements, with approximately 7% adopting the International Summit on Organic PV Stability (ISOS) protocol for stability evaluation. A standard for the stability assessment of emerging thin film IPVs still lags. This research area remains largely unexplored, yet it is essential to the commercialization of IPV technologies. This review focuses on perovskite‐based IPVs, with an emphasis on device stability. It provides discussions of the origins of degradation in perovskite materials and their corresponding IPV devices. This is followed by an overview of various structure–property–stability strategies, including compositional, interface, and device design engineering for perovskite materials to improve their performance. Finally, the review outlines some existing stability test protocols that could apply to perovskite IPVs, including addressing mitigation issues, such as encapsulation, draws the attention of researchers in the field, and calls for the development of standardized stability test protocols for perovskite IPVs and for understanding how these tests correlate with actual indoor lifespans to enable the commercialization of perovskite IPVs.