In the last decade, the development of simple and easy-to-use robotics has provided a significant step towards the democratization of collaborative robots, which can now work closely alongside humans. However, state-of-the-art cobots still provide safety at the cost of work-speed, which is purposely limited to avoid high-energy collisions. In order to increase safety and work speed simultaneously, force/impedance-controlled actuators with high dynamic performance, backdrivability and low-reflected inertia are of interest. In this letter, a novel robotic actuator architecture with two independent magnetorheological (MR) power chains is proposed, built and experimentally characterized. The modular 30 Nm robotic joint is shown to have similar size (85 X 85 X 124 mm), weight (1.1 kg) and torque density (27 Nm/kg) as the Universal Robot (UR) size 1 robotic joint, which relies on a Harmonic Drive (HD) gearbox, but with 150 times less inertia, high backdrivability (0.7% of max torque), high torque bandwidth (>70 Hz) and inherent torque-limiting that makes it immune to impacts. The dual MR power chain allows ultra-fast transparent interactions with bluezero backlash over half its torque range and peak torque when motor reversal is allowed. To illustrate the force/impedance control performance, a 3-DOF robotic arm is built and used to simulate virtual objects in both open and closed loop.
Collaborative robots are more and more used in applications requiring robots and humans to work in proximity or direct contact. However, conventional collaborative robots powered by servo-geared actuators are intrinsically dangerous due to their high reflected inertia. Recent studies have shown that low inertia and high bandwidth (> 30 Hz) magnetorheological (MR) actuators have the potential to improve the safety of collaborative robots without reducing their force and speed capabilities. The main contribution of this paper is to provide a quantitative assessment of how MR actuators can contribute to reducing the impact forces with humans, and thus increase the safety of collaborative robots. Dynamic models, validated with simplified 1 DOF experiments, show that the safety level of collaborative robots can be increased by a factor up to 3 only by changing the conventional servo-geared actuator architectures for MR actuators with no other changes. The paper also presents a simple, reliable, and fast collision detection method based on joint angular velocity band-pass filtering, a method exploiting the unique low inertia and clean dynamics properties of MR actuators. Finally, an experimental comparison of representative collaborative robots demonstrates an impact force reduction of 10 times using MR actuators, fast collision detection, and passive foam padding.