Farnaz Foadi

Farnaz Foadi

Auto-generated profile, based on publicly available information

Farnaz Foadi

Supermaterials Research Laboratory (SRL), Department of Physics, University of Tehran, North Kargar Avenue, P.O. Box 14395-547, Tehran, Iran

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2019 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
FFFarnaz Foadi
Farnaz Foadi
GBGert H. Ten Brink
Gert H. Ten Brink
MMMohammad Reza Mohammadizadeh
Mohammad Reza Mohammadizadeh
George PalasantzasGeorge Palasantzas
George Palasantzas
Here, we investigated the static and the dynamic wetting behaviors of copper (Cu) thin films deposited by DC magnetron sputtering. The deposited films have random rough surfaces for which the rms roughness amplitude σ , the lateral correlation length ξ , and the roughness exponent α were obtained from the analysis of height topography images acquired by atomic force microscopy. The time-dependent height-height correlation functions indicated anomalous kinetic roughening with roughness exponents α ≈ 0.9 and evolving roughness parameters σ and ξ with deposition time. The latter yields a nonstationary local surface slope σ / ξ that has a crucial impact on the surface wettability. Indeed, static and dynamic contact angles’ (CAs) measurements revealed two wetting regimes associated with different growth stages leading to a transition from a metastable Cassie-Baxter to a Wenzel-like state for the roughest films. Moreover, the increasing roughness with well distributed peaks and valleys leads to increasing CAs due to trapped air in surface cavities, while after some point the larger surface features lead to a decrement of the CAs that vary only slightly with further roughening. Although the apparent wetting transition with increasing surface roughness is not favored by the local Laplace pressure estimation, the energy of the system decreases with surface roughening, or equivalently increasing local surface slope, favoring energetically a Wenzel state. Under these conditions, the water droplet can spontaneously fill the surface cavities once the impregnation is initiated by the hydrophilic nature of the surface, in agreement with our experiments for significantly large local surface slopes ρ (>0.1) and large roughness exponents α ∼ 1.

26 August 2019 in Physical Review E
Verified
Journal Article
Closed access
PDF file
FFFarnaz Foadi
Farnaz Foadi
SAS. Mehdi Vaez Allaei
S. Mehdi Vaez Allaei
GPGeorge Palasantzas
George Palasantzas
MMMohammad Reza Mohammadizadeh
Mohammad Reza Mohammadizadeh
We studied the wetting behavior of silver and copper thin films versus their kinetic roughening upon deposition at room temperature on glass substrates. Time-dependent height-height correlation functions were extracted from atomic force microscopy images, and they demonstrated a nonstationary growth front of the film roughness associated with a temporal evolution of the local surface slope. As a result, we tried to correlate the roughness statistical properties such as the root-mean-square (rms) roughness σ, the correlation length ξ, and the local surface slope (ρ≈σ/ξ) with the wetting behavior of the films’ surfaces. The contact angle behavior was also studied by analyzing the variation of the energy of the system with water penetrating into the surface cavities, and the associated Laplace pressure induced by the local surface curvature. Hence, it was demonstrated that the wetting transition from a metastable Cassie-Baxter state to a Wenzel state as well as the penetration of a droplet into the surface crevices occur at the smaller local surface slopes for the higher surface energy material.

30 April 2020 in Surface Topography: Metrology and Properties
Verified
Journal Article
Closed access
FFFarnaz Foadi
Farnaz Foadi
HKHossein Kalhori
Hossein Kalhori
MMMohammad Reza Mohammadizadeh
Mohammad Reza Mohammadizadeh
Wetting properties of the 304 stainless steel indicate a hydrophilic nature. In this study, two methods including Cu 2 O thin film coating and chemical etching process have been applied on stainless steel substrates in order to fabricate hydrophobic surfaces. Cu 2 O films were synthesized using spray pyrolysis method at different deposition temperatures and different 2-propanol concentrations. X-ray diffraction (XRD) patterns obtained for the surfaces prepared at different temperatures showed different copper oxide phases well. In addition to XRD results for the samples prepared at different 2-propanol concentrations, the value of optical band gap for these surfaces calculated from UV-Vis spectra confirmed formation of Cu 2 O structure. Statistical parameters of the surfaces were calculated using atomic force microscopy (AFM) data including rms roughness σ , roughness exponent α and correlation length ξ . A similar behaviour was found between water contact angle and local surface slope ( ρ ≈ σ / ξ α ) of thin films. However, in the etching process of steel substrates, the effect of substrate roughness in obtaining water contact angle as high as ≈115° on the Cu 2 O surface was well established. The morphological properties of these latter surfaces were also studied by scanning electron microscopy (SEM). Generally, knowing statistical information of surface as well as chemical manipulations can be helpful to reach optimal conditions for synthesis of a hydrophobic surface.

9 May 2014 in The European Physical Journal Plus
Verified
Journal Article
Closed access
PDF file
FFFarnaz Foadi
Farnaz Foadi
EDElham Darabi
Elham Darabi
MHMohammad Reza Hantehzadeh
Mohammad Reza Hantehzadeh

15 June 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
ABAmir Bayat
Amir Bayat
MEMahdi Ebrahimi
Mahdi Ebrahimi
FFFarnaz Foadi
Farnaz Foadi
YAYaser Abdi
Yaser Abdi
AMAlireza Z. Moshfegh
Alireza Z. Moshfegh
In this study we investigate the wetting behavior of square-ordered microcone arrays from Laplace pressure and extended Gibbs free energy (EGFE) view point. We propose a thermodynamic phase diagram that defines four distinct wetting regimes (superabsorbent, hydrophilic, hydrophobic, and repellent phases) whose boundaries are determined by the interplay of Laplace pressure and EGFE. Microcone arrays were fabricated on Si (100) substrates via lithography and to investigate the role of surface tension, silicon microcone arrays were oxidized to create SiO₂ (nearly zero water contact angle), and further functionalized using methyltrimethoxysilane (MTMS) coupling agents (water contact angle measured experimentally 117°±2). This treatment allowed control of interfacial tensions, enabling systematic analysis of their influence on wetting phase transitions predicted by the Laplace pressure and extended Gibbs free energy (EGFE) model. Our analysis reveals a critical cone angle that dictates liquid absorption versus repulsion, dependent on surface tensions and geometric parameters. The proposed thermodynamic wetting phase diagram provides a formalism to predict both the contact angle (θ) and the transition conditions between wetting phases. Theoretical calculations are compared with our experimental results and the reported experimental measurements in literatures, demonstrating the robustness of the Laplace pressure-EGFE approach in defining phase boundaries and wettability behavior.

21 August 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
ABAmir Bayat
Amir Bayat
MEMahdi Ebrahimi
Mahdi Ebrahimi
FFFarnaz Foadi
Farnaz Foadi
YAYaser Abdi
Yaser Abdi
AMAlireza Z. Moshfegh
Alireza Z. Moshfegh
In this study we investigate the wetting behavior of square-ordered microcone arrays from Laplace pressure and extended Gibbs free energy (EGFE) viewpoint. We propose a thermodynamic phase diagram that defines four distinct wetting regimes (superabsorbent, hydrophilic, hydrophobic, and repellent phase states) whose boundaries are determined by the interplay of Laplace pressure and EGFE. Microcone arrays were fabricated on Si (100) substrates via lithography and to investigate the role of surface tension, silicon microcone arrays were oxidized to create SiO₂ and further functionalized using methyltrimethoxysilane (MTMS) coupling agents (water contact angle measured experimentally 117° ± 2°). This treatment allowed control of interfacial tensions, enabling systematic analysis of their influence on wetting phase transitions predicted by the Laplace pressure and extended Gibbs free energy (EGFE) model. Our analysis reveals a critical cone angle that dictates liquid absorption versus repulsion, dependent on surface tensions and geometric parameters. The proposed thermodynamic wetting phase diagram provides a formalism to predict both the contact angle (θ) and the transition conditions between wetting phase states. Theoretical calculations are compared with our experimental results and the reported experimental measurements in literature, demonstrating the robustness of the Laplace pressure-EGFE approach in defining phase boundaries and wettability behavior.