24 July 2023 in Energy Science & Engineering
This study reviews the current methods of numerical simulations for crystalline‐Si (c‐Si) photovoltaic (PV) cells. The increased demand for PV devices has led to significant improvements in the performance of solar cell devices. The main contribution comes from c‐Si solar cells, which constitute 90% of the industry. Numerical analysis is effective for predicting, developing, and optimizing cell performances as the cell structures become more complex and include several parameters. However, conventional methods cannot simulate improved device structures with complex configurations. Additional physics is necessary to evaluate these cell structures. This study introduces methods for evaluating these cell structures using physical modeling and highlights the latest examples of simulations of c‐Si solar cells.
28 June 2020 in Journal of Applied Physics
The piezoresistive effect is characterized by the change in the resistivity of a material relative to mechanical forces exerted on it. Such materials can be used as pressure sensors and are among the most important components for micro-electro mechanical system applications. To date, most research on the piezoresistive effect has been directed toward cubic crystalline materials such as Si; however, the prospective non-cubic materials, such as SiC, are known to have exciting and promising properties. SiC exhibits high-temperature robustness and is chemically stable. It is expected that these properties can be applied to a variety of applications. These materials fall in the category of hexagonal crystalline systems, and it is difficult to evaluate the piezoresistive properties of such materials. In this study, we discuss the piezoresistive mobility model that corresponds to both the cubic and the hexagonal crystalline systems. This mobility model is derived from the empirical fitting of the Gauge Factor ( ) values using the longitudinal and the transverse piezoresistive coefficients and the material-unique fitting parameters. Our proposed method has been implemented in the original device simulator and has been evaluated with respect to both Si and SiC materials. This report shows the well-matched values and suggests that the proposed piezoresistive effect model can be implemented in device simulation modeling.
17 August 2020 in IEEE Journal of Photovoltaics
We report on the evaluation of cell performances of the bifacial passivated emitter and rear cell (PERC) structures for both p- and n-type Cz-Si. We compared four conditions: Front-side illumination, with and without the rear metal contact, rear-side illumination, and double-side illumination. Furthermore, the effects of the rear contact area and the rear passivation surface recombination velocity (SRV) were evaluated. The numerical simulations were based on the experimental results of the p-type bifacial PERC performance, and we attempted to determine optimized cell designs for each condition. The results showed that the rear passivation SRV determined the bulk condition: An n-type bulk resistivity of 1 $\Omega$ -cm and p-type bulk resistivity with BO-cluster deactivation of 0.5 $\Omega$ -cm were suitable for a smaller and larger SRV, respectively.
11 February 2022 in IEEE Journal of the Electron Devices Society
We examine the temperature dependence of the piezoresistive coefficients of silicon carbide (SiC) and gallium nitride (GaN) crystals, which are prospective materials for high-temperature applications owing to their wide-bandgap properties. The temperature-dependent piezoresistive coefficients of these materials were obtained by modeling experimental resistance changes using thermomechanical numerical simulations. This work reports the piezoresistive coefficients of 4H-SiC and GaN at the high-temperature environments, which are still not well researched. The results revealed that the temperature dependences of piezoresistive coefficients were strongly related to the ionization energy, and a high ionization energy stabilized the values of the piezoresistive coefficients at high temperatures. Our proposed temperature modeling method helps in predicting the temperature dependence of the piezoresistive coefficient using the value at the room temperature and the ionization energy of the material, which is useful for evaluating the piezoresistive effect at different temperatures during device simulations.
16 September 2020 in IEEE Journal of Photovoltaics
The diffusion profiles of the front floating emitter (FFE) and front surface field (FSF) in a bifacial interdigitated back contact solar cell are optimized. The optimization results revealed that the FFE and FSF schemes are beneficial for enhancing the cell performance at the front and rear sides, respectively. Lighter doping is particularly better for the FSF scheme, and the FFE scheme requires a large diffusion depth for improving the performance. Increasing the area of the rear emitter boosts the performance of the cell, and an FFE scheme with 90 $\%$ rear emitter area is found to be the best design. Quantum efficiency mapping demonstrated that the FFE scheme suppresses the loss at the back surface field region, thereby enhancing the performance of the total cell. The FSF scheme improves the quantum efficiency for the entire region by enhancing the carrier transport in the vertical direction. Furthermore, loss analysis revealed that the FFE scheme suppresses the recombination loss at the maximum power point, which is an important advantage over the FSF scheme.