13 April 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this paper, a reconfigurable filter is proposed for simultaneous usage as ultra-wideband and wideband filters. The ultra-wideband (UWB) section is designed by constructing three parallelly connected quarter-wavelength transmission lines with two high impedance quarter-wavelength shorted stubs. The wideband (WB) section is implemented using an open stepped impedance stub-loaded resonator (OSSLR) and a shorted stepped impedance stub-loaded resonator (SSSLR). Nine pin diodes are embedded to switch the passband from UWB to WB and vice versa configuration. The filter in UWB mode produces a passband bandwidth (|S11| dB more than 10 dB) of 9.03 GHz from 2.15 GHz to 11.18 GHz, and the WB mode reports a passband bandwidth of 2.8 GHz, which ranges from 3.25 GHz to 6.05 GHz. Further, a lowpass filter is integrated with the design to obtain a wide upper stopband. The proposed prototype is fabricated and tested to validate the collaborative design concept. The overall circuit size of the prototype is 0.80λg × 0.42λg at 4.70 GHz.
29 December 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
A dual-functional reconfigurable filter is explored for the application in wideband and triple band band pass filter. The wideband configuration is implemented by parallel combination of open stub loaded and short circuited stub loaded resonators to exhibit a passband from 2.0 GHz-6.1 GHz. Tight coupling generates transmission zeroes at the either side of passband, which enhances the selectivity. The proposed tri-band BPF offers passbands at 2.4 GHz, 3.5 GHz and 5.2 GHz where two-stepped impedance resonators (SIRs) and one uniform impedance resonator (UIR) are assembled to accomplish such behavior. The two short circuited stubs are connected to the feed line to extend the range of upper stopband. PIN diodes are effectively utilized to switch the operation from wideband to tri-band or vice versa. Detailed design guidelines are provided to design the proposed filter. The behavior of the proposed filter topology is investigated by even and odd mode analysis. The developed reconfigurable filter is fabricated and measured to verify the anticipated and simulated results. A close agreement is observed between them. The fabricated reconfigurable BPF has a very compact size, high selectivity, less insertion loss and good return loss profile.