Polycarbonate (PC) is widely used in optical lenses, and lens manufacturing generates a heterogeneous waste stream known as swarf that also contains polyurethanes, thermoset resins, coatings, and process debris and is currently unrecyclable. In this study, solvent‑targeted recovery and precipitation (STRAP™) is evaluated as a selective dissolution approach to recover PC from optical lens swarf under mild conditions (<70 °C, ambient pressure). Solvent selection was guided by COSMO‑RS modeling to identify candidates capable of dissolving PC while minimizing dissolution of urethane‑based resins. Among the solvents tested, tetrahydrofuran (THF) dissolved the most swarf (62 wt%), outperforming toluene (52 wt%) and xylenes (44 wt%). Spectroscopic (FTIR), thermal (TGA, DSC), and chromatographic (GPC) analyses indicate that the THF‑recovered fraction consists of PC, with no detectable contamination from other polymers. A reduction in glass transition temperature (112.8 °C versus 142.1 °C for virgin PC) and minor early mass loss in TGA suggest slight degradation during processing (either before or during STRAP) and retention of residual solvent, highlighting the need for improved solvent removal strategies to restore material properties.A technoeconomic analysis of a small-scale STRAP facility (2,000–10,000 t*yr⁻¹) indicates that, under favorable assumptions for feedstock logistics, solvent-based PC recovery from swarf can be economically viable; specifically, a 5,000 t*yr⁻¹ plant selling recycled PC at $2.50 kg⁻¹ achieves a 15% IRR. Life cycle assessment shows an ≈80% reduction in cradle-to-gate greenhouse gas emissions versus virgin PC, with electricity dominating impacts. Further development is needed to address solvent management, feedstock variability, and polymer performance at scale.