Vincenzo Fiore

Vincenzo Fiore

Auto-generated profile, based on publicly available information

Vincenzo Fiore

DIEEI, Università di Catania, Catania, Italy

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 May 2015 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
VFVincenzo Fiore
Vincenzo Fiore
PBPlacido Battiato
Placido Battiato
SASahel Abdinia
Sahel Abdinia
SJStephanie Jacobs
Stephanie Jacobs
ICIsabelle Chartier
Isabelle Chartier
GPGiuseppe Palmisano
Giuseppe Palmisano
This paper presents the first printed organic 13-MHz RFID on flexible substrate. The proposed solution includes a planar near field antenna bonded to an RFID tag, which is printed on flexible foil using an organic complementary TFT technology. Thanks to an active envelope detector, ASK modulation with modulation depth as low as 20% can be adopted to increase the available input power for the rectifier. The RFID functionality is demonstrated at the internally generated supply voltage of 24 V, for a reading range of 2-5 cm and a bit-rate up to 50 bit/s. With more than 250 transistors on the same foil, this work represents the most complex circuit ever published in a printed organic complementary TFT technology.

25 April 2016 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
VFVincenzo Fiore
Vincenzo Fiore
Egidio RagoneseEgidio Ragonese
Egidio Ragonese
GPGiuseppe Palmisano
Giuseppe Palmisano
This paper presents the design and experimental characterization of a power transfer system performing a dc-dc conversion with on-chip galvanic isolation. The converter is operated in the VHF band, which enables fully integration of all the required components in silicon technology. It consists of only two silicon dice, i.e., a power oscillator with an on-chip isolation transformer and a full-bridge rectifier, which are fabricated in 0.35-μm BCD and 0.13-μm CMOS technology, respectively. A thick SiO 2 layer was used, which guarantees galvanic isolation between the transformer windings. A co-design procedure for the system building blocks is proposed, which aims at optimizing the dc-dc converter performance in terms of power efficiency at a given power density. Thanks to the adopted approach, a maximum output power up to 980 mW is demonstrated with a power efficiency of 29.6%. This paper outperforms previously reported integrated inductive step-up converters in terms of power per silicon area (up to 105 mW/mm 2 ), while providing on-chip galvanic isolation without any discrete devices or post-processing steps.

1 January 2016
Verified
Conference Paper
Closed access
PLPierpaolo Lombardo
Pierpaolo Lombardo
VFVincenzo Fiore
Vincenzo Fiore
Egidio RagoneseEgidio Ragonese
Egidio Ragonese
GPGiuseppe Palmisano
Giuseppe Palmisano
Galvanic isolation is becoming an essential requisite for several low-power applications, such as sensor interfaces and medical devices. In the last years, different solutions of silicon-integrated data transmission with galvanic isolation have been proposed that are based on RF links [1], capacitive couplings [2] or integrated coreless transformers [3]. As far as the power transfer is concerned, a dedicated link exploiting a discrete transformer is the typical solution. State-of-the-art devices currently adopt post-processed technologies and thick Au metals to implement the power link [4]. In this work, a fully integrated system is demonstrated for galvanically isolated power and bidirectional half-duplex data transfer by using a single integrated transformer [5].

4 December 2015 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
NSNunzio Spina
Nunzio Spina
VFVincenzo Fiore
Vincenzo Fiore
PLPierpaolo Lombardo
Pierpaolo Lombardo
Egidio RagoneseEgidio Ragonese
Egidio Ragonese
GPGiuseppe Palmisano
Giuseppe Palmisano
This paper presents a galvanically isolated power transfer system based on two inductively coupled CMOS oscillators with on-chip isolation transformer. The oscillators share the same current and are loaded by an integrated transformer that performs the combining of the oscillation signals at its secondary winding output. By using a thick inter-metal oxide layer for the integrated transformer, a galvanic isolation rating as high as 5 kV is guaranteed. Thanks to the proposed circuit topology, a 300-mW dc-ac power conversion performance with an excellent 36.5% power efficiency was achieved in a 0.8- μm CMOS technology at 5-V power supply. A complete dc-dc converter was also demonstrated by including a rectifier on a second die. An output power of 200 mW at 8-V output voltage with power efficiency better than 27% was measured.

25 November 2015 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
VFVincenzo Fiore
Vincenzo Fiore
Egidio RagoneseEgidio Ragonese
Egidio Ragonese
GPGiuseppe Palmisano
Giuseppe Palmisano
A high-performance ultrahigh-frequency amplitude shift keying (ASK) detector for low-power radio-frequency (RF) receivers is proposed. The circuit is based on a high-gain common-source topology with a feedback loop that provides adaptive biasing. Hence, high sensitivity and rail-to-rail input operation are achieved along with low power consumption. The detector was implemented in a standard 130-nm complementary metal-oxide-semiconductor technology. Sensitivity measurements demonstrate correct detection of a 2-Mb/s ASK-modulated 915-MHz signal with a peak level and a modulation index of around 200 mV and 5%, respectively, which means an envelope signal amplitude of as low as 5 mV. The circuit draws less than 3.4 μA from a 1.2-V power supply while operating with rail-to-rail RF variations and modulation indexes from 5% to 100%. This performance makes the detector suitable for batteryless systems with RF energy harvesting.

1 February 2014
Verified
Conference Paper
Closed access
VFVincenzo Fiore
Vincenzo Fiore
Egidio RagoneseEgidio Ragonese
Egidio Ragonese
SASahel Abdinia
Sahel Abdinia
SJStephanie Jacob
Stephanie Jacob
ICIsabelle Chartier
Isabelle Chartier
GPGiuseppe Palmisano
Giuseppe Palmisano
In the last several years, organic electronics have gained increasing consideration as a cost-effective alternative to silicon, especially in RFID applications. An inductive-coupled organic RFID operating at 13.56MHz was demonstrated on foil using p-type organic technologies [1]. A complementary organic technology was used for a 13.56MHz transponder in [2]. Recently, a complementary hybrid organic/metal-oxide process was exploited to demonstrate bidirectional communication in an HF RFID [3]. It adopts passive envelope detection using traditional diode-based schemes with OOK modulation. However, OOK modulation usually reduces sensitivity and reading range. In this work, a complementary organic TFT (C-OTFT) technology [4] is used for the first time to implement a 13.56MHz RX front-end, which exploits an active detection scheme and is able to demodulate ASK PWM-coded signals with modulation depth (h) as low as 25%.