In recent years, the exploitation of compact laser sources and amplifiers in fiber form has found extensive applications in industrial and scientific fields. The fiber format offers compactness, high beam quality through single-mode regime and excellent heat dissipation, thus leading to high laser reliability and long-term stability. The realization of devices based on this technology requires an active medium with high optical gain over a short length to increase efficiency while mitigating nonlinear optical effects. Multicomponent phosphate glasses meet these requirements thanks to the high solubility of rare-earth ions in their glass matrix, alongside with high emission cross-sections, chemical stability and high optical damage threshold. In this paper, we review recent advances in the field thanks to the combination of highly-doped phosphate glasses and innovative fiber drawing techniques. We also present the main performance achievements and outlook both in continuous wave (CW) and pulsed mode regimes.
In this paper the first glass based resorbable optical fiber is manufactured and characterized, showing values of attenuation loss from one to two orders of magnitude lower than the polymeric based bioresorbable devices reported in literature. The fiber behaves as a single-mode waveguide at the lower limit of the first biological window (1300 nm) and as a multi-mode waveguide in the visible region (630 nm). Highly transparent calcium-phosphate glasses (PGs) are proposed as a new class of materials for biomedical optics, managing to combine for the first time in a vitreous material solubility in aqueous media, transparency in the near UV region, low intrinsic attenuation loss and thermal stability during fiber drawing. In-vitro tests in physiological conditions show dissolution kinetics of glass fibers in about a month.
We report on the inscription of Bragg gratings in a bioresorbable phosphate optical fiber using 193 nm excimer laser radiation and the phase mask technique. Bragg gratings with a typical 6 dB transmission strength were created over a length of 5 mm employing moderate inscription energy densities. The dissolution of the fiber, when immersed in phosphate buffered saline (PBS) solution, was studied through the alteration of the spectral response of the cladding modes scattered by Bragg reflectors inscribed with a small tilting angle.