1 March 2022 in Materials Testing
Additive manufacturing is a production technology based on creating three-dimensional parts directly from computer-aided design data layer-by-layer. In recent years, it has been used in many industries with the production of functional, high-quality metallic parts with the powder bed fusion process by laser. The build orientation of the three-dimensional part has a major impact on many factors such as part quality, waste amount, production time, and cost. In this study, a multi-objective optimization is carried out using non-dominated sorting genetic algorithm-II to simultaneously optimize different objectives that may conflict with each other, such as the amount of support structure and build time. Estimation methods are developed for computing the amount of support structure and the build time, which reflect the current state of the technology. With the developed method, build orientation is optimized for a complex part, and the wide range of alternative results are visualized and evaluated. The design for additive manufacturing knowledge required to correctly perform the build orientation process is eliminated by automating the pre-processing stage. Therefore, the contribution is made to the accessibility and sustainability of the PBF-L, which has high process costs by minimizing support structure volume and build time.
27 August 2024 in Materials Testing
Build orientation in additive manufacturing technology is a pre-process application that affects many parameters, such as the volume of the support structure, part quality, build time, and cost. Determining the optimum build orientation for one or more objectives for complex parts is an error-prone puzzle. This study evaluates the behavior of cuckoo search algorithm, differential evolution, firefly algorithm, genetic algorithm, gray wolf optimizer, Harris hawks optimization, jaya algorithm, moth flame optimizer, multi-verse optimizer, particle swarm optimization, A Sine cosine algorithm, salp swarm algorithm, and whale optimization algorithm to determine the optimum build orientation of the component to be manufactured additively. The efficiency of these algorithms is evaluated on the build orientation problem of two complex components considering undercut area and build height as objective functions. Thus, the feasibility of these algorithms for real-world additive manufacturing problems is revealed. According to results obtained from the extensive analysis, the cuckoo search algorithm is the best alternative for minimizing undercut area, considering its robustness. However, the required time to solve the problem is as much as almost twice that of other algorithms. The firefly algorithm and particle swarm optimization algorithm are the best alternatives for minimizing build height.
29 October 2018 in MATEC Web of Conferences
The hydroforming method is especially used for forming lightweight materials like aluminum, magnesium alloys, high strength steels or materials that have limited formability. Intensifiers are the most important component of hydroforming presses. Nowadays single-acting intensifiers are used in hydroforming presses. Single-acting intensifiers provide pressurized liquid by forwarding movement of the piston through one direction and their volumes are limited. The mass of the intensifiers increases significantly depending on their liquid volume capacity and this causes high manufacturing costs. For this reason, two or more single-acting intensifiers which bridged in a parallel circuit are used to manufacture bigger products that require a high volume of liquid. But this method is not an economical solution. So double-acting intensifiers can overcome this problem. The pressurized liquid can be obtained during both forward and backward movement of the piston in double-acting intensifiers which work like a pump. This is why double-acting intensifiers have no volume limit on the contrary of single-acting intensifiers. Yet there are sudden pressure drops in double-acting intensifiers caused by returning movements of the piston to pressurize liquid again. This pressure drops cause some problems to use double-acting intensifiers on hydroforming method. The situation of solving this problem to use double-acting intensifiers on the hydroforming method can eliminate limited volume problem and decrease investment cost of hydroforming presses. In this study, the usability of double-acting intensifiers on hydroforming with die method was investigated. Because of the existing hydroforming press, used in experiments, doesn’t contain any double-acting intensifiers, pressure drops obtained by single-acting intensifier to perform simulated experiment. A die was designed and manufactured to synchronize the blank holder force with pressure drops. This die was integrated on the hydroforming press, located on Selcuk University Hydroforming Laboratory, for the success of the process. Performance of improved system was measured as well as repeatability of applying process parameters and product’s geometry were determined. The AA5754 aluminum alloy used processes, both single- and double-acting intensifier, were compared. Limiting drawing ratios were determined for all processes. It is obtained that pressure drops have no negative influence on formability. Moreover, there is no difference observed in thickness distribution which is an indicator of product’s quality and strength. However, when geometric accuracy was investigated then noticed that the pressure drops count has a good influence on product radius. 5.96 mm product radiuses on the process with single-acting intensifier was obtained 5.92 and 5.10 mm by using double-acting intensifier increasing pressure drop’s frequency.
8 July 2022 in Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Kaza anında araçların hızları ve kütleleri sebebiyle yüksek miktarda enerji açığa çıkmakta ve bu enerjinin uygun şekilde sönümlenmesi gerekmektedir. Düzgün sönümlenemeyen enerji iç parçalara, sürücüye ve yolculara zarar verecek kuvvetlerin oluşmasına sebep olarak hayati sorunlara yol açar. Araçlarda bu sönümlemeyi yapabilmek için devletlerin, kurumların ve sigorta şirketlerinin öne sürdüğü kriterleri karşılayabilecek özel tasarlanmış çarpışma kutusu adındaki parçalara ihtiyaç duyulmaktadır. Sürdürülebilirlik, çevre, yakıt tasarrufu gibi kavramlarla beraber araçlarda hafifliğin ön plana çıkması ve artan rekabet, kaza dışında âtıl duran çarpışma kutuları üzerinde önemli çalışmalara yol açmıştır. Bu nedenlerle, çarpışma kutularının kinetik enerjiyi emme performansı, üretilebilirliği, maliyeti, hafifliği göz önünde bulundurularak uygun seçimler yapılmalıdır. Bu çalışma, çarpışma kutusunun performansını artırıcı temel faktörleri ele alan kapsamlı bir literatür araştırmasını içermektedir. Çalışmada, çarpışma kutularının enerji sönümleme yeteneği; geometri, malzeme ve dolgu gibi üç temel başlık altında ele alınmıştır. Bu kapsamda, literatürdeki çalışmalar incelenerek çarpışma kutuları ile gerçekleştirilen enerji emilimi konusundaki önemli noktalar derlenmiştir.