RESUMO Com o agravamento dos problemas ambientas causados pela má gestão de resíduos sólidos, os polímeros biodegradáveis surgem como alternativas de materiais sustentáveis que podem de minimizar o impacto ambiental. Diante da demanda urgente por produtos sustentáveis, o presente trabalho teve como objetivo desenvolver filmes a base poli (ácido láctico) (PLA) e a proteína isolada de soja (SPI) via extrusão plana para estudo como potencial aplicação em embalagens para alimentos. Os filmes foram produzidos em cinco diferentes formulações: a matriz pura de PLA como filme controle; PLA com 3 e 5% da proteína isolada de soja, PLA com 3 e 5% da proteína isolada de soja com o acréscimo de 1,5% de glicerol, e analisados via termogravimetria, espectroscopia de infravermelho, transmitância por UV-vis e ângulo de contato. O resultados indicaram que a inserção dos componentes à matriz de PLA levou a redução da estabilidade térmica dos filmes, que também não apresentaram interação química entre os seus componentes. As partículas de soja, melhor dispersas na matriz em função da presença do plastificantes, auxiliaram na redução da transmitância dos filmes, e na formação de sistemas hidrofílicos.
This study explores the development of biodegradable filaments for additive manufacturing, aiming to create membranes for oil and water separation. Using a mixture of poly (lactic acid) and poly (butylene adipate co-terephthalate) (PLA/PBAT) with additives such as zinc oxide, biocide and carnauba wax. The research evaluates the potential of these materials in membrane prototyping for this application. Characterization techniques such as FTIR, XRD, DSC and tensile strength were employed. The results showed that the addition of the additives did not induce the formation of new bands in the FTIR. However, new diffraction peaks appeared in the composites indicating the presence of the zinc oxide. DSC revealed a double peak in melting and crystallization temperatures and the mechanical tests showed significant influence of additives on tensile strength. The composite filaments proved to be suitable for 3D printing, suggesting their applicability in the manufacture of filter membranes for oil and water separation.
26 February 2026 in Polymers for Advanced Technologies
Replacing conventional plastics in packaging requires biodegradable formulations that balance mechanical performance, thermal stability, and scalable melt processing. Despite growing interest in PBAT/PLA systems, few studies have concurrently incorporated an inorganic additive and a regionally sourced biomass derivative into an Ecovio matrix. This study developed flat‐die‐extruded Ecovio hybrid films containing sodium nitrite (NaNO 2 ; SN) and babassu starch (BS). It evaluated their effects on key structural, surface, thermal, and mechanical properties relevant to sustainable packaging. The results indicated preservation of the Ecovio chemical structure, increased intensity of C–O‐related bands upon BS incorporation, and no spectroscopic evidence of new chemical bonding associated with SN. Morphological analysis revealed a progressive increase in surface heterogeneity with higher BS content, while maintaining visually continuous films without macroscopic cracking. Water contact angle values shifted from hydrophobic (94.50°) to more hydrophilic behavior (76.96°), suggesting a combined effect of the SN/BS system on surface wettability. Thermal stability was comparable across formulations, with Tdmax ranging from 398.38°C to 406.55°C, whereas the final residue varied broadly (4.69%–30.26%), suggesting composition‐dependent differences in residual mass formation. Relative to neat Ecovio, SN increased tensile strength and elongation at break (up to 23.72 MPa and 849.70%, respectively), whereas BS primarily enhanced tear strength (up to 25.33 N). Overall, the SN/BS hybrid films enabled tunable surface, thermal, and mechanical responses as a function of composition, offering a viable strategy for designing biodegradable packaging materials.