Anil Kumar Gautam

Anil Kumar Gautam

Auto-generated profile, based on publicly available information

Anil Kumar Gautam

Department of Electronics & Communication Engineering G B Pant Institute of Engineering & Technology Pauri Garhwal Uttarakhand India

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 February 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
RCRicha Chandel
Richa Chandel
AGAnil Kumar Gautam
Anil Kumar Gautam
KRKarumudi Rambabu
Karumudi Rambabu
In this study, a compact design of multiple-inputmultiple- output (MIMO) antenna with dual sharply rejected notch bands for portable wireless ultra-wideband (UWB) applications is presented and experimentally investigated. The proposed UWB MIMO antenna has a compact size of 18mm×34mm. The tapered microstrip fed slot antenna acts as a single radiating element with inverted L-shaped slits to introduce notches at WLAN and IEEE INSAT/Super-Extended C-bands. The mutual coupling of less than -22 dB is achieved over the entire operating band (2.93 to 20 GHz). At the centre of notched band, the efficiency of the antenna drops that indicates a good interference suppression performance. The performance of the MIMO antenna in terms of isolation between the ports, radiation pattern, efficiency, realized gain, envelope correlation coefficient (ECC), mean effective gain (MEG) and total active reflection coefficient (TARC) is studied.

30 January 2013 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
AGAnil Kr Gautam
Anil Kr Gautam
SYSwati Yadav
Swati Yadav
BKBinod Kr Kanaujia
Binod Kr Kanaujia
A novel coplanar waveguide (CPW)-fed compact ultrawideband (UWB) microstrip antenna is proposed for ultrawideband applications. The proposed antenna posseses a method to minimize the monopole antenna by loading of inverted L-strip over the conventional monopole patch antenna to lower the height of the antenna. The ground was vertically extended toward two sides of the single radiator. Therefore, the large space around the radiator that is usually wasted can be effectively saved. The antenna is practically fabricated and simulated. Measured results show a good agreement with simulated results. The prototype with overall size of $25 \times 25 \times 1.6\ {\hbox{mm}}^3$ achieves good impedance matching, constant gain, stable radiation patterns, and constant group delay over an operating bandwidth of 2.6-13.04 GHz (10.44 GHz).

29 December 2015 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AGAnil Kumar Gautam
Anil Kumar Gautam
LKLalit Kumar
Lalit Kumar
BKBinod Kumar Kanaujia
Binod Kumar Kanaujia
KRKarumudi Rambabu
Karumudi Rambabu
This communication presents a small, low-profile planar triple-band microstrip antenna for WLAN/WiMAX applications. The goal of this communication is to combine WLAN and WiMAX communication standards simultaneously into a single device by designing a single antenna that can excite triple-band operation. The designed antenna has a compact size of $19 \times 25\;\text{mm}^{2}$ ($0.152 \lambda_{0}\;\times 0.2 \lambda_{0}$). The proposed antenna consists of F-shaped slot radiators and a defected ground plane. Since only two F-shaped slots are etched on either sides of the radiator for triple-band operation, the radiator is very compact in size and simple in structure. The antenna shows three distinct bands I from 2.0 to 2.76, II from 3.04 to 4.0, and III from 5.2 to 6.0 GHz, which covers entire WLAN (2.4/5.2/5.8 GHz) and WiMAX (2.5/3.5/5.5) bands. To validate the proposed design, an experimental prototype has been fabricated and tested. Thus, the simulation results along with the measurements show that the antenna can simultaneously operate over WLAN (2.4/5.2/5.8 GHz) and WiMAX (2.5/3.5/5.5 GHz) frequency bands.

3 December 2015 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AFAkanksha Farswan
Akanksha Farswan
AGAnil Kumar Gautam
Anil Kumar Gautam
BKBinod Kumar Kanaujia
Binod Kumar Kanaujia
KRKarumudi Rambabu
Karumudi Rambabu
In this study, a novel design of circularly polarized antenna based on Koch fractal geometry is presented and experimentally investigated. Circular polarization and size reduction are achieved by placing two asymmetric Koch fractal geometries on x-and y-planes of the single-probe feed square radiator. Further, to tune resonant frequency around the 911MHz, four arrow-shaped slots are inserted in diagonal axes of the square radiator. It is perceived that compact size of the antenna can be achieved by increasing the overall size of the arrow-shaped slots and indentation angles of Koch fractal geometry. The antenna is fabricated on FR4 substrate with a size of 54 × 54 × 1.6 mm 3 (0.162λ 0 × 0.162λ 0 × 0.0048λ 0 at 900 MAbstract-In this study, a novel design of circularly polarized antenna based on Koch fractal geometry is presented and experimentally investigated. Circular polarization and size reduction are achieved by placing two asymmetric Koch fractal geometries on xand y-planes of the single-probefeed square radiator. Further, to tune resonant frequency around the 911MHz, four arrow-shaped slots are inserted in diagonal axes of the square radiator. It is perceived that compact size of the antenna can be achieved by increasing the overall size of the arrow-shaped slots and indentation angles of Koch fractal geometry. The antenna is fabricated on FR4 substrate with a size of 54 × 54 × 1.6 mm 3 (0.162λ 0 × 0.162λ 0 × 0.0048λ 0 at 900 MHz) and tested to validate the proposed design. The 3-dB axial-ratio bandwidth and impedance bandwidth of the proposed antenna design are found to be 8 MHz (907.0-915 MHz) and 37.0 MHz (891.0-928.0 MHz), respectively. The measured results confirm that the proposed design covers US radio-frequency identification (RFID) band (902-928 MHz) and can be used for RFID short-range reading applications.Hz) and tested to validate the proposed design. The 3-dB axial-ratio bandwidth and impedance bandwidth of the proposed antenna design are found to be 8 MHz (907.0-915 MHz) and 37.0 MHz (891.0-928.0 MHz), respectively. The measured results confirm that the proposed design covers US radio-frequency identification (RFID) band (902-928 MHz) and can be used for RFID short-range reading applications.

26 June 2018 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
AGAnil Kumar Gautam
Anil Kumar Gautam
SYSwati Yadav
Swati Yadav
KRKarumudi Rambabu
Karumudi Rambabu
This study describes the design of a very compact dual‐band‐notched ultrawide band (UWB) multiple‐input multiple‐output (MIMO) antenna. The main features of the proposed antenna are its compact dimensions and high isolation between the two antenna elements. The UWB performance of the antenna is attained by designing two identical triangular‐shaped patch elements, which are designed opposite to each other and connected to a tapered microstrip feedline. The ground plane of the proposed antenna consists of a funnel‐shaped patch connected with two triangles at the lower end. In addition, two J‐shaped slits are etched in the radiator to get the band rejection characteristics at wireless local area network band from 5.1 to 5.8 GHz and IEEE INSAT/Super‐Extended C‐band from 6.7 to 7.1 GHz. The designed antenna has the smallest dimension of . Results show that the MIMO antenna has a large impedance bandwidth of 31.9 GHz from 3.1 to 35 GHz. The diversity performance of the proposed antenna is also analysed using different parameters such as envelope correlation coefficient (ECC), diversity gain, total active reflection coefficient and so on. Due to the low mutual coupling of <−24 dB and ECC of <0.2 across the frequency band this antenna is a good candidate for portable UWB applications.

1 March 2016 in Electronics Letters
Verified
Journal Article
Open access
PDF file
RCR. Chandel
R. Chandel
AGA.K. Gautam
A.K. Gautam
A novel MIMO sharp band‐notched antenna with high isolation for UWB applications is presented. The antenna consists of two antenna elements with an overall area of 18 × 36 mm 2 . A T‐shaped stub is extruded in the ground plane to improve isolation and an L‐shaped stub to introduce band‐notched function C‐band (3.62–4.77 GHz). The designed antenna possesses a low mutual coupling of <−20 dB over the operating band from 2.9 to 20 GHz. The performance of this antenna is studied in terms of isolation between the two ports, radiation pattern, efficiency, realised gain, and envelope correlation coefficient.