Despite a body of research carried out on thermally coupled processes in soils, understanding of thermo-osmosis phenomenon in clays and its effects on hydromechanical behavior is incomplete. This paper presents an investigation on the effects of thermo-osmosis on hydraulic behavior of saturated clays. A theoretical formulation for hydraulic behavior was developed, incorporating an explicit description of thermo-osmosis effects on coupled hydromechanical behavior. The extended formulation was implemented within a coupled numerical model for thermal, hydraulic, chemical, and mechanical behavior of soils. The model was tested and applied to simulate a soil heating experiment. It is shown that the inclusion of thermo-osmosis in the coupled thermohydraulic simulation of the case study provides a better agreement with the experimental data compared with the case in which only thermal expansion of the soil constituents was considered. A series of numerical simulations are also presented, studying the por...
23 April 2014 in Geotechnical and Geological Engineering
This paper presents an investigation of coupled thermal, hydraulic, and chemical behavior of a compacted bentonite buffer under the heating and hydration conditions of geological disposal of high-level nuclear waste. The study presented provides further insight into the evolution of hydro-geochemistry of the compacted bentonite and the clay microstructure effects through a numerical modelling development of the reactive transport of multicomponent chemicals. The application/validation case study is based on a series of laboratory tests on heating and hydration of compacted bentonite for a period of 0.5–7.6 years reported in the literature. The effects of microstructure evolution during hydration and dehydration on the transport phenomena are included via a new approach that links the geochemistry of clay hydration/dehydration with the transport properties. The analysis results related to the moisture flow and chloride transport demonstrate close correlation with the experimental results by the inclusion of the effects of microstructure evolution in the transport phenomena. The results of numerical analysis of reactive transport of chemicals highlight the importance of accessory minerals present in bentonite on the distribution of some anionic species. The behavior of major cationic species is shown to be mainly governed by the transport processes. Further insights into the chemically driven processes in clay buffer due to coupled hydraulic and thermal effects are presented and discussed that are captured from the results of modeling the clay-water-chemical system.
Deep un-mineable coal deposits are viable reservoirs for permanent and safe storage of carbon dioxide (CO2) due to their ability to adsorb large amounts of CO2 in the microporous coal structure. A reduced amount of CO2 released into the atmosphere contributes in turn to the mitigation of climate change. However, there are a number of geomechanical risks associated with the commercial-scale storage of CO2, such as potential fault or fracture reactivation, microseismic events, cap rock integrity or ground surface uplift. The present study assesses potential site-specific hydromechanical impacts for a coal deposit of the Upper Silesian Coal Basin by means of numerical simulations. For that purpose, a near-field model is developed to simulate the injection and migration of CO2, as well as the coal-CO2 interactions in the vicinity of horizontal wells along with the corresponding changes in permeability and stresses. The resulting effective stress changes are then integrated as boundary condition into a far-field numerical model to study the geomechanical response at site-scale. An extensive scenario analysis is carried out, consisting of 52 simulation runs, whereby the impacts of injection pressures, well arrangement within two target coal seams as well as the effect of different geological uncertainties (e.g., regional stress regime and rock properties) is examined for operational and post-operational scenarios. The injection-induced vertical displacements amount in maximum to 3.59 cm and 1.07 cm directly above the coal seam and at the ground surface, respectively. The results further demonstrate that neither fault slip nor dilation, as a potential consequence of slip, are to be expected during the investigated scenarios. Nevertheless, even if fault integrity is not compromised, dilation tendencies indicate that faults may be hydraulically conductive and could represent local pathways for upward fluid migration. Therefore, the site-specific stress regime has to be determined as accurately as possible by in-situ stress measurements, and also fault properties need to be accounted for an extensive risk assessment. The present study obtained a quantitative understanding of the geomechanical processes taking place at the operational and post-operational states, supporting the assessment and mitigation of environmental risks associated with CO storage in coal seams.