16 March 2021 in ACS Omega
MFI-type zeolitic membranes were prepared on the porous α-A2O3 support to investigate the separation properties of dichlorobenzene isomers. The pervaporation tests were performed with unary and binary isomer mixtures at 333 K. The results indicate that the silicalite membranes, irrespective of being synthesized by the templated or template-free method, are permeable for all dichlorobenzene isomers. The pervaporation fluxes of the pure dichlorobenzene isomers decrease in the order p-DCB > o-DCB > m-DCB. For the binary pervaporation system, the dichlorobenzene fluxes are all less than those with a single component due to the binary interactions between DCB isomers and between the DCB isomer and the zeolite membrane. Comparatively, the template-free MFI-type zeolite exhibits higher selectivity for dichlorobenzene isomers due to less inter-crystalline gaps. The separation factors for p-/o-DCB and p-/m-DCB can reach 16.7 and 22.0, respectively.
2 September 2021 in Nanotechnology
Silicalite-1 zeolitic membranes have been successfully fabricated on the porous α-Al2O3 support by templated and template-free protocol, respectively, for vapor permeation separation of dichlorobenzene (DCB) isomers. After proving the high quality of the membranes by single gas permeation (He and SF6) performance, the vapor-permeation of DCB isomers over two types of the silicalite-1 membrane was then investigated. The separation results clearly indicated that under the lower partial pressure and higher temperature, the effect of DCB isomer adsorption on the permeance could be kept at a sufficiently low level and sharp selectivity become more important. Thus, high p-DCB selectivity could be achieved. Comparatively, the template-free silicalite-1 zeolite has a much higher p-DCB selectivity due to the relatively fewer inter-crystalline gaps. Under certain separation conditions, the highest selectivity of p-DCB for p-/m-DCB and p-/o-DCB binary systems could reach 165 and 113, respectively.