MFI-type zeolitic membranes were prepared on the porous α-A₂O₃ support to investigate the separation properties of dichlorobenzene isomers. The pervaporation tests were performed with unary and binary isomer mixtures at 333 K. The results indicate that the silicalite membranes, irrespective of being synthesized by the templated or template-free method, are permeable for all dichlorobenzene isomers. The pervaporation fluxes of the pure dichlorobenzene isomers decrease in the order p-DCB > o-DCB > m-DCB. For the binary pervaporation system, the dichlorobenzene fluxes are all less than those with a single component due to the binary interactions between DCB isomers and between the DCB isomer and the zeolite membrane. Comparatively, the template-free MFI-type zeolite exhibits higher selectivity for dichlorobenzene isomers due to less inter-crystalline gaps. The separation factors for p-/o-DCB and p-/m-DCB can reach 16.7 and 22.0, respectively.

Separation of dichlorobenzene (DCB) isomers with high purity by time− and energy−saving methods from their mixtures is still a great challenge in the fine chemical industry. Herein, silicalite-1 zeolites/polydimethylsiloxane (PDMS) hybrid membranes (silicalite-1/PDMS) have been successfully fabricated on the porous polyvinylidene fluoride (PVDF) supports to first investigate the pervaporation separation properties of DCB isomers. The morphology and structure of the silicalite-1 zeolites and the silicalite-1/PDMS/PVDF hybrid membranes were characterized by XRD, FTIR, SEM and BET. The results showed that the active silicalite-1/PDMS layers were dense and continuous without any longitudinal cracks and other defects with the silicalite-1 zeolites content no more than 10%. When the silicalite-1 zeolites content exceeded 10%, the surfaces of the active silicalite-1/PDMS layers became rougher, and silicalite-1 zeolites aggregated to form pile pores. The pervaporation experiments both in single-isomer and binary−isomer systems for the separation of DCB isomers was further carried out at 60 °C. The results showed that the silicalite-1/PDMS/PVDF hybrid membranes with 10% silicalite-1 zeolites content had better DCB selective separation performance than the silicalite-1/α−Al₂O₃ membranes prepared by template method. The permeate fluxes of the DCB isomers increased in the order of m−DCB < o−DCB < p−DCB both in single-isomer and binary-isomers solutions for the silicalite-1/PDMS/PVDF hybrid membranes. The separation factor of the silicalite-1/PDMS/PVDF hybrid membranes for p/o−DCB was 2.9 and for p/m−DCB was 4.6 in binary system. The permeate fluxes of the silicalite-1/PDMS/PVDF hybrid membranes for p−DCB in p/o−DCB and p/m−DCB binary−isomers solutions were 126.2 g∙m⁻²∙h⁻¹ and 104.3 g∙m⁻²∙h⁻¹, respectively. The thickness−normalized pervaporation separation index in p/o−DCB binary−isomers solutions was 4.20 μm∙kg∙m⁻²∙h⁻¹ and in p/m−DCB binary−isomers solutions was 6.57 μm∙kg∙m⁻²∙h⁻¹. The results demonstrated that the silicalite-1/PDMS/PVDF hybrid membranes had great potential for pervaporation separation of DCB from their mixtures.

Modified MFI-type/PDMS composite membranes are used to separate dichlorobenzene isomerviapervaporation for the first time, which is synthesized by incorporating modified silicalite-1 zeolites into the PDMS matrix and casting on PVDF supports.

Staphylococcus aureus (S. aureus) is one of the most common pathogens for nosocomial and community infections, which is closely related to the occurrence of pyogenic and toxic diseases in human beings. In the current study, a lab-built microchip capillary electrophoresis (microchip CE) system was employed for the rapid determination of S. aureus, while a simple-to-use space domain internal standard (SDIS) method was carried out for the reliable quantitative analysis. The precision, accuracy, and reliability of SDIS were investigated in detail. Noted that these properties could be elevated in SDIS compared with traditional IS method. Remarkably, the PCR products of S. aureusnuc gene could be identified and quantitated within 80 s. The theoretical detection limit could achieve a value of 0.066 ng/μL, determined by the using SDIS method. The current work may provide a promising detection strategy for the high-speed and highly efficient analysis of pathogens in the fields of food safety and clinical diagnosis.