1 June 2021 in Case Studies in Construction Materials
1 June 2020 in Diyala Journal of Engineering Sciences
Diyala Journal of Engineering Sciences
15 March 2022 in Diyala Journal of Engineering Sciences
The deflection of reinforced concrete beams with various cross-sections was investigated in this work. The experimental program comprised of four reinforced concrete beams that were simply supported. They were put through a two-point load test. High to width ratio (h/b) was (0.36, 0.64, 1, and1.56), concrete compressive strength was from 27 MPa. The gradual increase in the (h/b) ratio (from 0.36 to 0.64, 1 and 1.56) with (27 MPa) compressive strength of concrete leads to increase the first crack load for the (N2, N3 and N4) by (74%, 111% and 122%) respectively as compared with (N1), the beams (N2, N3 and N4) exhibits an increase in the yielding load by (41.2%, 70.6% and 64.7%) respectively as compared with (N1), increase the ultimate load by (25% - 130%). The ductility index is reduced with gradual increase in the (h/b) ratio (from 0.36 to 0.64, 1 and 1.56) for (27 MPa) concrete compressive strength by (1.2% - 25.5%). For the beams (N1, N2, N3 and N4) it is noticed that the central deflection of the four beams reduced gradually at the same load with increase in the (h/b) ratio from (0.36 to 0.64, 1 and 1.56) with constant (27 MPa) compressive strength concrete. The maximum crack width decreases gradually with gradual increase in the (h/b) ratio (from 0.36 to 0.64, 1 and 1.56) for constant (27 MPa).