Ahmed Abdullah Mansor

Ahmed Abdullah Mansor

Auto-generated profile, based on publicly available information

Ahmed Abdullah Mansor

Civil Engineering Departments, University of Diyala, Baquba, Iraq

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2021 in Case Studies in Construction Materials
Verified
Journal Article
Open access
WSWissam D. Salman
Wissam D. Salman
AMAhmed Abdullah Mansor
Ahmed Abdullah Mansor

1 July 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
AMAhmed Abdullah Mansor
Ahmed Abdullah Mansor
AMAhlam Sader Mohammed
Ahlam Sader Mohammed
WSWissam D Salman
Wissam D Salman
This search report is an experimental result on load –deflection relationship of various ratios of longitudinal reinforcement for six simply supported reinforced concrete beams. All specimens’ dimensions are (200×300×1750mm) and they were tested under two-point loading. Concrete compressive strength was (37.0-40.7 MPa). The variables studied in this work were tensile steel ratio (0.46-3.0%), bar diameter (12, 16 and 25mm) and number of bars (2 or 3 bars). It is concluded that for low reinforcement values (ρ < 0.013), an increase in ρ is sharply reduced the ductility index μ d . However, this effect decreases with increase in ρ values. All beams exhibit insufficient displacement ductility (less than 3) when reinforced with ρ/ρ b > 0.4. The increase in longitudinal steel ratio using 2 bars is more significant than when using 3 bars in yield and ultimate strengths of specimens as well as the deflection values at yield load, but the deflection values have gradual decrease at the ultimate load as a result of ductility decrease. It was concluded that the increase in longitudinal reinforcement ratio causes an increase in yield and ultimate strength of beams, these increments are compatible with the steel ratio i.e. by increasing the ρ by 50% the strength is increased about this ratio. As well as, the decreasing in ductility compatible with increasing the ρ by 50% the ductility decreased in about 50% on average.

1 July 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
NHNoor S. Hadi
Noor S. Hadi
SOSafie Mahdi Oleiwi
Safie Mahdi Oleiwi
WSWissam D. Salman
Wissam D. Salman
AIAmer M. Ibrahim
Amer M. Ibrahim
AMAhmed Abdullah Mansor
Ahmed Abdullah Mansor
Near surface mounted (NSM) is a promising strengthening technique for improving the flexural, shear and torsional strength of structures. Epoxy is the adhesive material used in this technique, but, the rapid failure happened in the mechanical properties of the epoxy matrix at high temperature, and the dangerous effects of epoxy fumes on the workers made the need of replacing epoxy with a new sustainable adhesive. Geopolymer Paste Adhesive and Modified Geopolymer Paste Adhesive were used in this study as adhesive materials in NSM strengthening technique to be an alternative to epoxy, where the geopolymer is a sustainable, environmentally friendly and less expensive material than epoxy. More importantly, it can better work at high temperatures. The test results showed that the modified geopolymer paste adhesive beat the epoxy adhesive by (4.1)% when adding (1)% micro steel fiber and (9.6)% when adding (0.6)% carbon fiber, while the bond strength reaches to (93)% of epoxy adhesive when adding (0.6)% polypropylene fiber.

20 November 2020 in Asian Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
WSWissam D. Salman
Wissam D. Salman
AMAhmed Abdullah Mansor
Ahmed Abdullah Mansor

28 April 2017 in The Open Civil Engineering Journal
Verified
Journal Article
Open access
PDF file
AIAmer Ibrahim
Amer Ibrahim
AMAhmed Abdullah Mansor
Ahmed Abdullah Mansor
MHMuthafer Hameed
Muthafer Hameed
Carbon fiber reinforced polymers (CFRP) were widely used in strengthening of reinforced concrete members in the last few years. Experimental and theoretical investigations were carried out to find the behavior of reinforced concrete beams strengthened in shear by CFRP strips. Six beams measured of 200x300x2000mm were investigated. The variables investigated in this work are orientation (vertical and inclined) and the spacing between CFRP strips.It was found that the strengthening by CFRP strips increased the crack, yield and ultimate load by 10%, 71% and 77% respectively on average. Inclined CFRP strips show a better performance than vertical CFRP strips with same distances and increase the yield and ultimate load by 11% and 13% respectively on average. By covering all faces of specimen with CFRP strips, the yield and ultimate load increased by 82% and 95% respectively. Using the CFRP strips changed the failure model from shear to flexural by increasing the shear strength, so the ductility was increased by 198% on average. CFRP increased the strain in compression face of concrete and the value was greater than (0.003). For all strengthened specimens, there was no effect on CFRP strips.

10 December 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
AMAhmed Abdullah Mansor
Ahmed Abdullah Mansor
AMAhlam Sader Mohammed
Ahlam Sader Mohammed
MMMaysoon Adullah Mansor
Maysoon Adullah Mansor