1 March 2022 in Geodesy and Geodynamics
10 September 2024 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
LuTan-1 (LT-1) is China's first L-band differential interferometric SAR satellite system, and also the first twin L-band SAR satellite system in the world. Geometric accuracy is one of the most crucial indicators for remote sensing satellites. SAR images with high geometric accuracy not only establish a more accurate geometric correspondence between image pixels and actual ground objects but also greatly simplify the later application. This paper primarily explores the geometric error issues of the LT-1 satellite system, encompassing analysis of error sources, error modeling, and correction. Through research conducted on 232 acquisitions of LT-1 covering three calibration arrays across the globe during the in-orbit commissioning phase, it is shown that the direct out-of-box LT-1 SAR imagery exhibits a slant range deviation of approximately 38 meters and an azimuth deviation of about 15 meters. After applying the correction methods described in this paper, the range accuracy is improved to 0.7 meters, and the azimuth accuracy is enhanced to 2.1 meters. In addition, we found that after correcting for atmospheric delay, there still exists a correlation between the slant range errors and beams. Optimal correction results can only be achieved through beam-wise calibration. Since the LT-1 operates in the L-band SAR frequency range, where ionospheric propagation delay is significant. We analyzed the relationship between ionospheric delay estimation error and slant range error. Our analysis revealed that the accuracy of ionospheric delay estimation is the primary factor limiting the precision of the slant range.
25 June 2024 in IEEE Transactions on Geoscience and Remote Sensing
We propose an atmospheric turbulence statistical characteristic-enhanced stacking-InSAR method to more accurately derive the average deformation velocity for slow or linear surface displacements. It can be used to estimate the variance and covariance matrix (VCM) for time series InSAR observations pixel by pixel. Moreover, a minimum variance linear estimator is used to calculate optimal weights for interferogram stacking. Compared with traditional stacking, our method is an improvement, and its advantages include the following: 1) The relevance between time-series atmospheric delays of interferograms is considered, 2) the atmospheric turbulence is better suppressed, and 3) the performance is not limited by the quantity of interferograms. The effectiveness of the new method is verified through a series of simulated experiments and real Sentinel-1 experiments over Southern California. The results demonstrate that our proposed method is more effective and robust in removing turbulent atmospheres.
25 August 2025 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The extraction of ground control points (GCPs) from spaceborne synthetic aperture radar (SAR) is an effective technique for rapid, contactless, and globally available georeferencing. In recent years, China has made significant progress in the deployment and application of SAR satellites. However, the automatic derivation of high-precision GCPs remains challenging, primarily due to two key factors: 1) the need for high-accuracy calibration of SAR geometric observations, and 2) the automatic detection and matching of candidate GCPs (CGCPs) across SAR images acquired from different look angles. This paper proposed an improved algorithm framework for GCP extraction, and demonstrated the application potential of China's SAR satellites. The main improvements are as follows: 1) Beam-dependent biases are incorporated into the geometric calibration process to achieve higher ranging accuracy. 2) A CGCP detector is designed that leverages shape characteristics to robustly identify CGCPs without relying on any external data. 3) An integrated matching scheme is proposed, which combines preprocessing, feature description, and transformation-search strategies to enable effective pairing of CGCPs. SAR imagery from China's Gaofen-3B (GF3B) and Superview Neo-2 (SVN2) 01/02 satellites is utilized, and geometric calibration is performed using the open-access corner reflector array in Australia. GCP extraction experiments are conducted in the Suzhou area, with 7,477 GCPs automatically extracted and a root mean square error (RMSE) better than 1 meter.
19 June 2025 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Phase unwrapping is a crucial step in interferometric synthetic aperture radar (InSAR), as it directly influences the accuracy of surface deformation monitoring and topographic mapping. However, phase unwrapping in disconnected regions due to surrounding low-coherence pixels and irregular terrain like islands remains challenging. To address this issue, we propose an advanced phase unwrapping method that enhances network construction for disconnected regions by leveraging continental drift concept and visual contour features. The method adaptively connects disconnected regions and reconstructs a spatial network, significantly increasing the number of network connections between these regions compared to the original network. Consequently, our method can optimize the unwrapping paths, enhance anti-noise performance, and improve phase unwrapping accuracy. The effectiveness of the proposed method is validated through both simulated and real datasets. The results demonstrate that our proposed method outperforms the classical minimum cost flow (MCF) method, achieving a 37.29% reduction in phase standard deviation (PSD), and improving the accuracy of subsequent parameter estimation.
1 January 2026 in IEEE Transactions on Geoscience and Remote Sensing