Rahul Dev Mishra

Rahul Dev Mishra

Auto-generated profile, based on publicly available information

Rahul Dev Mishra

Optoelectronic Nanodevice Research Laboratory, Department of Electrical Engineering, Indian Institute of Technology, Indore, India

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
SKSantosh Kumar
Santosh Kumar
AKAshutosh Kumar
Ashutosh Kumar
RMRahul Dev Mishra
Rahul Dev Mishra
PBPrem Babu
Prem Babu
SPSuresh Kumar Pandey
Suresh Kumar Pandey
MKMukesh Kumar
Mukesh Kumar
Hybrid plasmonic waveguide holds a great promise as a potential nanophotonic platform for variety of applications including biosensing which usually requires strong analyte-matter interaction. We propose a nanophotonic ring resonator based on slotted hybrid plasmonic waveguide as a platform to realize resonance enhanced sensing with strong light-analyte interaction on a subwavelength scale. The optical mode guided in the bus waveguide gets coupled to the slotted ring as hybrid plasmonic mode which enables efficient bio-sensing. The slotted hybrid plasmonic waveguide utilized in the ring provides larger propagation length over 2.5 mm with a subwavelength confinement at the wavelength of 1.55 μm. The slotted structure also exhibits broadband propagation of hybrid plasmonic mode where the propagation length remains around 1.2 mm over a wavelength range from 1.3 μm to 1.6 μm. A 29.6 nm shift in the transmission spectra of the engineered ring resonator is observed on changing the analyte refractive index to 1.3514 (polluted water) from 1.333 (pure water). The sensitivity for the detection of polluted water is reported to be 1609 nm/RIU, which is approximately four times more than dielectric slotted ring resonator and eight times more than the ring resonator with a ridge structure. The proposed engineered slotted waveguide structure may be helpful in realizing nanophotonic devices for a various applications, including bio-chemical sensing and large-scale photonic integration.

18 May 2021 in Optics Letters
Verified
Journal Article
Closed access
PDF file
LSLalit Singh
Lalit Singh
SSSulabh Srivastava
Sulabh Srivastava
SRSwati Rajput
Swati Rajput
VKVishal Kaushik
Vishal Kaushik
RMRahul Dev Mishra
Rahul Dev Mishra
MKMukesh Kumar
Mukesh Kumar
An optical switch with ultra high extinction ratio is proposed. Optical switching is realized using the resistive switching effect through the lateral coupling between the input nanophotonic waveguide and output waveguide at a wavelength of 1550 nm. The coupled waveguide system is engineered to increase the number of mode beats in a unit length of the device. An increase in the number of mode beats and controlled diffusion of metal ions through a thin dielectric layer with an applied electric field is responsible for a high optical extinction ratio of 27 dB for a 20 µm long device. Compared to electrical control by plasma dispersion in silicon, the resistive switching effect enables a reduction in the coupling length and an increase in the waveguide absorption, leading to an almost 100 times higher extinction ratio. The proposed compact on-chip silicon-based nanophotonic resistive device is a potential candidate for a large-scale integrated photonic circuit for applications in optical switching, modulation, memory, and computation.

20 August 2021 in Journal of Lightwave Technology
Verified
Journal Article
Open access
SRSwati Rajput
Swati Rajput
VKVishal Kaushik
Vishal Kaushik
LSLalit Singh
Lalit Singh
SPSulabh Suresh Kumar Pandey
Sulabh Suresh Kumar Pandey
RMRahul Dev Mishra
Rahul Dev Mishra
MKMukesh Kumar
Mukesh Kumar
An efficient photodetector based on the sub-bandgap transition in Silicon-Indium Tin Oxide (ITO) distributed heterojunctions in form of a grating is demonstrated. The barrier height of 0.45 eV across n: Si - n: ITO heterojunction is sufficient to knock out the electrons to be photoexcited from ITO to Si for a wide wavelength around 1550 nm without using any plasmonic interaction. The n: Si - n: ITO grating structure with high refractive index contrast provides enhanced light-matter interaction and improved absorption efficiency. A large amount of photoexcitation resulting from the distributed heterojunctions leads to an improved responsivity as compared to the single planar heterojunction. We report a responsivity of 0.28 A/W at 1550 nm wavelength in a sub-bandgap regime which is higher than that of photodetectors with metal/2D materials using plasmonic interactions. The responsivity remains acceptably high for a wide wavelength range of 1530 nm-1570 nm.

4 October 2024 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
SKSantosh Kumar
Santosh Kumar
AKAshutosh Kumar
Ashutosh Kumar
RMRahul Dev Mishra
Rahul Dev Mishra
PBPrem Babu
Prem Babu
SPSuresh Kumar Pandey
Suresh Kumar Pandey
MKMukesh Kumar
Mukesh Kumar
Multilevel resistive devices have gained a lot of research attention in the past decade due to their attractive potential applications in high-density non-volatile memory, and unconventional computing. We propose an engineered multilevel nanophotonic resistive switching device with CMOS compatible Ag-ITO-SiO2 structure on silicon for enhanced storage density and in-memory computing with optical readout functionality. The four-layered structure includes a SiO2/ITO region strategically positioned between an efficient Ag (top) electrode and an underlying p-Si bottom electrode. The engineered nanophotonic device confined hybrid plasmonic mode, mainly in the SiO2 region and with an applied voltage conductive filaments form/deform along ITO and SiO2 layers influencing optical absorption detectable through interaction between the guided hybrid plasmonic mode and conductive filaments. The proposed device achieves stable multiple optical states by controlling compliance current, storing two bits without compromising accuracy to enable parallel computing, and efficient area savings with enhanced storing density for in-memory computing applications on a photonic platform. Additionally, the experimental results demonstrate a significant extinction ratio of 32 dB for the $10\ \mu \text{m} \times 500$ nm device with a low voltage operation. The engineered nanophotonic structure exhibits high retention, high endurance, low operating power, and high speed, making it suitable for various applications, including optical modulation, neuromorphic computation, biochemical sensing, photogating and high-density advanced memory devices.

26 May 2021 in Applied Optics
Verified
Journal Article
Closed access
RMRahul Dev Mishra
Rahul Dev Mishra
LSLalit Singh
Lalit Singh
SRSwati Rajput
Swati Rajput
VKVishal Kaushik
Vishal Kaushik
SSSulabh Srivastava
Sulabh Srivastava
MKMukesh Kumar
Mukesh Kumar
A silicon-based engineered hybrid plasmonic waveguide with ultra-low dispersion is proposed. The ridge-shaped structure of the nanophotonic waveguide enables nano-scale confinement with electrically tunable characteristics using the plasma dispersion effect in silicon. The waveguide exhibits ultra-low dispersion of 1.28 p s 2 / m at telecommunication wavelength (1550 nm) in C band together with dual flatband dispersion over a wavelength range of 370 nm. The hybrid plasmonic mode is made to be confined in 15 nm thick S i O 2 with a propagation loss of 15.3 dB/mm utilizing the engineered ridge structure comprising Si, S i O 2 , and gold. In addition, the proposed waveguide shows six zero-dispersion wavelengths. The imaginary and real parts of the effective refractive index of the guided hybrid plasmonic mode are reported to be tunable with the applied voltage. The reported numerical results can pave the way for achieving intensity modulators and other electrically tunable devices at telecommunication wavelengths. The ultra-low dispersion and electrical tuning make this nanophotonic waveguide an absolute contender for applications including efficient nonlinear signal processing such as wide wavelength conversion based on four-wave mixing, supercontinuum generation, and other nanoscale integrated photonic devices.

6 February 2024 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
SPSuresh Kumar Pandey
Suresh Kumar Pandey
RMRahul Dev Mishra
Rahul Dev Mishra
PBPrem Babu
Prem Babu
NMNikita Mohanta
Nikita Mohanta
SKSantosh Kumar
Santosh Kumar
MKMukesh Kumar
Mukesh Kumar
An electrically tunable plasmonic absorber device is experimentally demonstrated at 1550 nm wavelength. The device consists of alternating Cu- ITO grating on the top of a p-type silicon rib waveguide, filled with n-type indium tin oxide (ITO) as a capping layer. The distributed plasmonic mode at the interface of Cu-SiO 2 -Si is efficiently coupled with ITO. The electrically tunable permittivity of ITO changes the optical absorption by employing electrically driven carrier depletion and accumulation. We demonstrate large tuning of optical intensity by electrically driven carrier accumulation at ITO interface by applying very low voltage from 0 to −4 V. A 100-μm long device exhibits a high extinction ratio of 22 dB and wide 3 dB bandwidth of 52.2 GHz. Applications for our proposed device include imaging, biosensing, intensity modulators, and other multi-functional nanophotonic devices where change in optical absorption is a key requirement.